/* * Automatically generated IOVariable merge information * $Copyright: (c) 2006, Broadcom Corp. * All Rights Reserved.$ * $Id: wlu_iov.c 399026 2013-04-27 00:44:07Z yongfang $ * * Contains user IO variable information * Note that variable type information comes from the driver */ #if defined(_CFE_) #include #include #include #include #include #else #include #include #include #include #include #endif /* defined(_CFE_) */ #include #include #include #include "wlu.h" #ifdef BCMINTERNAL wlu_iov_info_t wlu_iov_info[] = { { "2g_mrate", CMD_UNCAT, 0, 0, "no desc" }, { "2g_rate", CMD_UNCAT, 0, 0, "no desc" }, { "5g_mrate", CMD_UNCAT, 0, 0, "no desc" }, { "5g_rate", CMD_UNCAT, 0, 0, "no desc" }, { "a_mrate", CMD_PHY + CMD_RATE, 0, 0, "Multicast rate override setting for .11a" }, { "a_rate", CMD_PHY + CMD_RATE, 0, 0, "Rate override setting for .11a" }, { "activezone", CMD_UNCAT, 0, 0, "no desc" }, { "ampdu", CMD_UNCAT, 0, 0, "A-MPDU policy value; to modify, driver must be down" }, { "ampdu_ba_wsize", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 64, "Advertized ba window size (in MPDU)" }, { "ampdu_clear_dump", CMD_MON + CMD_ADMIN, 0, 0, "Clears AMPDU specific statistics (WLCNT)" }, { "ampdu_density", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 6, "Advertised receive density" }, { "ampdu_dur", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Max duration of transmitted ampdu (in msec)" }, { "ampdu_ffpld", CMD_UNCAT, 0, 0, "Display the ampdu for each mcs and the estimated minimum dma transfer rate" }, { "ampdu_ffpld_rsvd", CMD_UNCAT, 0, 0, "no desc" }, { "ampdu_hiagg_mode", CMD_UNCAT, 0, 0, "no desc" }, { "ampdu_manual_mode", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Enables manual mode; addba is sent by user through command line (in msec)" }, { "ampdu_max_txunfl", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 200, "Maximum acceptable tx underflow per ampdu: tx_unfl < ampdu_max_txunfl * ampdus" }, { "ampdu_mpdu", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Max number of mpdu in ampdu" }, { "ampdu_probe_mpdu", CMD_UNCAT, 0, 0, "no desc" }, { "ampdu_resp_flush", CMD_UNCAT, 0, 0, "no desc" }, { "ampdu_resp_timeout", CMD_UNCAT, 0, 0, "no desc" }, { "ampdu_retry_limit", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 5, "Number retries before sending BAR to move window" }, { "ampdu_rr_retry_limit", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 2, "Number retries of AMPDU at regular rate before change to fallback rate" }, { "ampdu_rts", CMD_UNCAT, 0, 0, "no desc" }, { "ampdu_rx_factor", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 2, "Advertises ampdu max size" }, { "ampdu_send_addba", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Sends addba request and initializes tid initiator" }, { "ampdu_send_delba", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Sends delba request and cleans up tid initiator" }, { "ampdu_tid", CMD_MGMT, 0, 0, "Enables/Disables AMPDU on a per-tid basis" }, { "ampdu_tx_lowat", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 1, "Low watermark to initiate aggregate" }, { "ampdu_txpkt_weight", CMD_UNCAT, 0, 0, "no desc" }, { "amsdu", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "A-MSDU policy value; driver must be down to modify" }, { "amsdu_aggblock", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 0, "Manually block all scb A-MSDU aggregation" }, { "amsdu_aggbytes", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 1600, "A-MSDU aggregation bytes limit" }, { "amsdu_aggflush", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL | WLU_IOVI_WRITE_ONLY, 0, "Flush all scb A-MSDU buffers" }, { "amsdu_aggsf", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 10, "A-MSDU aggregation MSDU number limit" }, { "amsdu_clear_counters", CMD_UNCAT, 0, 0, "no desc" }, { "amsdu_counters", CMD_UNCAT, 0, 0, "no desc" }, { "amsdu_deaggdump", CMD_UNCAT, 0, 0, "no desc" }, { "amsdu_hiwm", CMD_UNCAT, 0, 0, "no desc" }, { "amsdu_lowm", CMD_UNCAT, 0, 0, "no desc" }, { "amsdu_noack", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "A-MSDU ack policy; send A-MSDU without mac ack" }, { "amsdu_rxmax", CMD_UNCAT, 0, 0, "no desc" }, { "amsdu_sim", CMD_UNCAT, 0, 0, "no desc" }, { "antennas", CMD_UNCAT, WLU_IOVI_READ_ONLY, 0, "Read only return total number of antennas to be used(1-4 for now)" }, { "ap", CMD_AP + CMD_STA, WLU_IOVI_DEFAULT_VALID, 0, "Running as an access point" }, { "ap_isolate", CMD_MGMT + CMD_AP, WLU_IOVI_DEFAULT_VALID, 0, "Data frames received by the AP are passed up only, not forwarded" }, { "apcschspec", CMD_UNCAT, 0, 0, "no desc" }, { "apname", CMD_MGMT + CMD_MON + CMD_AP, WLU_IOVI_READ_ONLY | WLU_IOVI_DEFAULT_VALID, 0, "Get current associated AP; max len 16; if not associated may return stale data" }, { "apsta", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Enable AP-STA mode" }, { "apsta_dbg", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Debug mode for AP/STA" }, { "assoc_info", CMD_MGMT + CMD_STA, 0, 0, "Returns a wl_assoc_info_t struct with assoc pkts lengths and 802.11 headers" }, { "assoc_req_ies", CMD_UNCAT, 0, 0, "Returns the IE portion of the most recent association request pkt" }, { "assoc_resp_ies", CMD_UNCAT, 0, 0, "Returns the IE portion of the most recent association response pkt" }, { "assocroam", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Enable roaming to assoc preferred band when there is no need to roam" }, { "auth", CMD_MGMT + CMD_SEC, 0, 0, "no desc" }, { "authe_sta_list", CMD_MGMT + CMD_SEC, 0, 0, "no desc" }, { "autho_sta_list", CMD_MGMT + CMD_SEC, 0, 0, "no desc" }, { "autocountry_default", CMD_UNCAT, 0, 0, "no desc" }, { "ba", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Block Ack policy value; can only be modified when driver is down" }, { "band_range", CMD_PHY + CMD_CHAN, 0, 0, "2.4G band - 0; 5G band: low - 1, mid - 2, high - 3" }, { "ba_bar_timeout", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 100, "timeout in msec to send BAR" }, { "ba_barfreq", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 4, "freq of packets at which BAR is sent." }, { "ba_bsize", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 16, "advertized ba window size (in MPDU)" }, { "ba_cf_policy", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "BA/BAR ctrl frame ack policy; 0:normal; 1:noack" }, { "ba_clear_counters", CMD_MON + CMD_ADMIN, WLU_IOVI_BCM_INTERNAL, 0, "clear/reset BA counters (BCMDBG)" }, { "ba_counters", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Return BA counters (BCMDBG)" }, { "ba_delba_timeout", CMD_UNCAT, 0, 0, "no desc" }, { "ba_ini_pkt_thresh", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 50, "moving average in pkts/sec for prior 8-sec window to initiate addba" }, { "ba_send", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 1, "Send unsolicited ADDBA; for testing;" }, { "ba_sim", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 1, "Setup for linuxsim testing;" }, { "bcmerror", CMD_UNCAT, 0, 0, "Get the error code corresonding to the last configuration error." }, { "bcmerrorstr", CMD_ADMIN, 0, 0, "Get the error string corresonding to the last configuration error." }, { "bcn_timeout", CMD_UNCAT, 0, 0, "no desc" }, { "bg_mrate", CMD_PHY + CMD_RATE, 0, 0, "Multicast rate override setting for .11b/g" }, { "bg_rate", CMD_PHY + CMD_RATE, 0, 0, "Rate override setting for .11b/g" }, { "bss", CMD_MGMT + CMD_AP + CMD_STA, WLU_IOVI_DEFAULT_VALID, 0, "Enable BSS configuration" }, { "bss_maxassoc", CMD_UNCAT, 0, 0, "Limit the number of 802.11 Associations the driver should accept for a BSS" }, { "btc_mode", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Bluetooth coexistance modes; 0: disable; 1: enable; 2: prempt" }, { "cac", CMD_UNCAT, 0, 0, "Call Admission Control; CAC can only be enabled if WME is enabled" }, { "cac_addts", CMD_MGMT + CMD_WME + CMD_AP + CMD_STA, 0, 0, "Add/update TSPEC; requires tspec_arg_t structure as input" }, { "cac_addts_timeout", CMD_UNCAT, 0, 0, "no desc" }, { "cac_delts", CMD_MGMT + CMD_WME + CMD_AP + CMD_STA, 0, 0, "Delete matching TSPEC; requires tspec_arg_t structure as input" }, { "cac_tslist", CMD_MGMT + CMD_WME + CMD_AP + CMD_STA, WLU_IOVI_READ_ONLY, 0, "Get current list of driver TSINFO" }, { "cac_tspec", CMD_MGMT + CMD_WME + CMD_AP + CMD_STA, WLU_IOVI_READ_ONLY, 0, "Get specified TSPEC with given TSINFO" }, { "cap", CMD_ADMIN, WLU_IOVI_READ_ONLY, 0, "Returns whitespace-separated driver/device capabilities" }, { "ccgpioctrl", CMD_UNCAT, 0, 0, "no desc" }, { "ccgpioin", CMD_UNCAT, 0, 0, "no desc" }, { "ccgpioout", CMD_UNCAT, 0, 0, "no desc" }, { "ccgpioouten", CMD_UNCAT, 0, 0, "no desc" }, { "cck_txbw", CMD_PHY + CMD_CHAN + CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 2, "CCK frame tx bandwidth; 2: 20Mhz lower, 3: 20Mhz upper" }, { "ccx_auth_mode", CMD_UNCAT, 0, 0, "CCX authentication mode" }, { "ccx_rm", CMD_UNCAT, 0, 0, "no desc" }, { "ccx_rm_limit", CMD_UNCAT, 0, 0, "no desc" }, { "ccx_version", CMD_UNCAT, 0, 0, "Network ccx version." }, { "ccx_ihv", CMD_UNCAT, WLU_IOVI_READ_ONLY, 0, "Under IHV control" }, { "ccx_enable", CMD_UNCAT, 0, 0, "CCX enabled" }, { "ccx_v4_only", CMD_UNCAT, 0, 0, "CCXv4 only" }, { "chanspec", CMD_PHY + CMD_CHAN, 0, 0, "Current chanspec in use; set for next BSS created" }, { "chanspecs", CMD_PHY + CMD_CHAN, 0, 0, "Returns a list of all of the available chanspecs" }, { "clkreqtimer", CMD_UNCAT, 0, 0, "no desc" }, { "closednet", CMD_SEC, WLU_IOVI_DEFAULT_VALID, 0, "BSS Configuration Closed Network attribute; BSS must be disabled to change" }, { "counters", CMD_MON + CMD_ADMIN, WLU_IOVI_READ_ONLY, 0, "Get a buffer containing driver/ucode counters" }, { "country_ie_override", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Stores the country IE for beacons and probe responses" }, { "country_list_extended", CMD_UNCAT, 0, 0, "If true, all countries reported by get_country_list" }, { "cram", CMD_UNCAT, 0, 0, "no desc" }, { "csa", CMD_PHY + CMD_CHAN + CMD_MGMT, 0, 0, "AP mode only; send out Channel Switch Announcement management action frame" }, { "cur_etheraddr", CMD_UNCAT, 0, 0, "Current MAC address" }, { "cur_mcsset", CMD_UNCAT, 0, 0, "no desc" }, { "dbgsel", CMD_UNCAT, 0, 0, "no desc" }, { "dfs_channel_forced", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "The next dfs channel is forced to this channel for testing" }, { "dfs_ism_monitor", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Force ISM to be in monitor-only mode; disables channel swtiching, etc" }, { "dfs_postism", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 60, "Number of seconds to listen for radar on new channel for 802.11H" }, { "dfs_preism", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 60, "Number of seconds to listen for radar before initiating a network" }, { "dfs_status", CMD_PHY + CMD_CHAN, WLU_IOVI_READ_ONLY, 0, "Report the status of dfs processing" }, { "diag", CMD_ADMIN, 0, 0, "Returns test information" }, { "dump", CMD_ADMIN, 0, 0, "Options all, list, ; call registered dump functions" }, { "eap_restrict", CMD_SEC, 0, 0, "no desc" }, { "eirp", CMD_UNCAT, 0, 0, "Is current locale use of txpower EIRP or not" }, { "event_msgs", CMD_MAC, 0, 0, "128-bit vector to enable MAC event reporting" }, { "fast_timer", CMD_UNCAT, 0, 0, "no desc" }, { "fips", CMD_UNCAT, 0, 0, "Windows NDIS STA; 0: disable; 1: enable; -1: prohibit FIPS" }, { "fips_add_key", CMD_UNCAT, 0, 0, "Windows NDIS STA driver; set key for FIPS." }, { "fips_oid", CMD_UNCAT, 0, 0, "Windows NDIS STA; change when not associated; OID_FSW_FIPS_MODE request" }, { "fips_remove_key", CMD_UNCAT, 0, 0, "Windows NDIS STA driver; remove key for FIPS." }, { "fragthresh", CMD_UNCAT, 0, 0, "no desc" }, { "freqtrack", CMD_PHY + CMD_CHAN, WLU_IOVI_DEFAULT_VALID, 0, "Current frequency tracking mode; 0: auto; 1: on; 2: off" }, #if defined(WLNINTENDO) { "gameinfo", CMD_UNCAT, 0, 0, "no desc" }, #endif /* WLNINTENDO */ { "gf_cap", CMD_UNCAT, 0, 0, "no desc" }, { "gf_protection", CMD_UNCAT, 0, 0, "gf_protection; 0: off, 1: on" }, { "gf_protection_override", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, -1, "State of gf_protection_override; -1: auto, 0: off, 1: on" }, { "glacial_timer", CMD_UNCAT, 0, 0, "no desc" }, { "gpioout", CMD_DEV, 0, 0, "Set GPIO pins to given; use with EXTREME caution; see wl gpiodump" }, { "gpiotimermask", CMD_UNCAT, WLU_IOVI_BCM_INTERNAL, 0, "Timer mask for gpiotimer" }, { "gpiotimerval", CMD_UNCAT, 0, 0, "Deprecated: use leddc" }, { "htphy_membership", CMD_UNCAT, 0, 0, "enable/disable HT PHY Membership; 0: off, 1: on" }, { "hwkeys", CMD_SEC + CMD_ADMIN + CMD_DEV, 0, 0, "no desc" }, { "ibss_allowed", CMD_UNCAT, 0, 0, "no desc" }, { "ibss_gmode", CMD_UNCAT, 0, 0, "no desc" }, { "join_pref", CMD_UNCAT, 0, 0, "no desc" }, { "keydatareq", CMD_UNCAT, 0, 0, "no desc" }, { "led_blinkfast", CMD_UNCAT, 0, 0, "no desc" }, { "led_blinkmed", CMD_UNCAT, 0, 0, "no desc" }, { "led_blinkslow", CMD_UNCAT, 0, 0, "no desc" }, { "leddc", CMD_UNCAT, 0, 0, "gpiotimer value; to enable powersavings for LEDs" }, { "lifetime", CMD_MGMT + CMD_AP + CMD_STA, 0, 0, "This iovar controls the packet lifetime in ms for an access class" }, { "lpphy_rxiqcal", CMD_UNCAT, 0, 0, "no desc" }, { "lpphy_tx_tone", CMD_UNCAT, 0, 0, "no desc" }, { "lpphy_txiqlocal", CMD_UNCAT, 0, 0, "no desc" }, { "lpphy_txpwrctrl", CMD_UNCAT, 0, 0, "no desc" }, { "lpphy_txpwrindex", CMD_UNCAT, 0, 0, "no desc" }, { "malloced", CMD_UNCAT, 0, 0, "no desc" }, { "maxassoc", CMD_UNCAT, 0, 0, "Limit the number of 802.11 Associations the driver should accept" }, { "mcast_list", CMD_UNCAT, 0, 0, "List of multicast addresses to be passed to upper-layer protocols (4320 CDC)" }, { "mimo_bw_cap", CMD_UNCAT, 0, 0, "Supported channel width bit in HT Cap Info field, TRUE = 40MHz; FALSE = 20MHz" }, { "mimo_preamble", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, -1, "n-mode preamb override; -1: auto; 0: mixed-mode; 1: GF-only; device down to set" }, { "mimo_ps", CMD_PHY + CMD_CHAN + CMD_POWER, WLU_IOVI_DEFAULT_VALID, 3, "MIMO EWC capability IE; 0: No MIMO, 1: RTS before MIMO, 2: N/A, 3: No Restriction" }, { "mimo_ss_stf", CMD_UNCAT, 0, 0, "no desc" }, { "mimo_txbw", CMD_PHY + CMD_CHAN, WLU_IOVI_DEFAULT_VALID, 2, "MIMO frame tx bandwidth; 2: 20Mhz lower, 3: 20Mhz upper, 4: 40Mhz, 5: 40Mhz dup" }, { "mode_reqd", CMD_MGMT, WLU_IOVI_DEFAULT_VALID, 0, "set/get required mode for STA association acceptance with AP" }, { "mpc", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Enable Minimum Power Consumption in driver" }, { "mpreq", CMD_UNCAT, 0, 0, "no desc" }, { "mssid", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Multi-SSID enabled; driver must be down to set" }, { "n_bw", CMD_UNCAT, 0, 0, "no desc" }, { "ndis_unblock_8021x", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Override 802.1x authentication" }, #if defined(WLNINTENDO) { "nitro", CMD_UNCAT, 0, 0, "no desc" }, { "nitro_clear_counters", CMD_UNCAT, 0, 0, "no desc" }, { "nitro_counters", CMD_UNCAT, 0, 0, "no desc" }, #endif /* WLNINTENDO */ { "nmode", CMD_UNCAT, 0, 0, "Enable pre-n features; driver must be down to set" }, { "nmode_protection", CMD_UNCAT, 0, 0, "n_protection; 0: off, 1: mixed-mode, 2: CTS-to-self" }, { "nmode_protection_override", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, -1, "State of n_protection; -1: auto, 0: off, 1: on, 2: MM Hdr 3: CTS" }, { "nobcnssid", CMD_UNCAT, 0, 0, "no desc" }, { "nobcprbresp", CMD_UNCAT, 0, 0, "no desc" }, { "nonerp_present", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_5g_pwrgain", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_aci_scan", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_aci_w2based_detection", CMD_UNCAT, 0, 0, "no desc" }, { "phy_antsel", CMD_UNCAT, 0, 0, "no desc" }, { "phy_antsel_override", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_est_power", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_fixed_noise", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_forcecal", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_forcemphasecal", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_gain_boost", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_gpiosel", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_mphasecal", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_mphasecalstate", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_nextcal", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_percal", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_rfseq", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_rssisel", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_rxant_config", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_rxcalparams", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_rxiqcal", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_scraminit", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_test_tssi", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_test_tssi_offs", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_tx_tone", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_txant_config", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_txiqlocal", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_txpwrctrl", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_txpwrindex", CMD_UNCAT, 0, 0, "no desc" }, { "nphy_txrx_chain", CMD_UNCAT, 0, 0, "no desc" }, { "nrate", CMD_PHY + CMD_RATE, 0, 0, "band-specific rate override; 0: SISO, 1: CDD, 2: STBC, 3: SDM" }, { "nreqd", CMD_UNCAT, 0, 0, "no desc" }, { "nvram_dump", CMD_ADMIN, 0, 0, "Retrieve nvram contents in multi-string, double-null-byte-terminated format" }, { "nvram_get", CMD_ADMIN, 0, 0, "Get an nvram variable by name" }, { "ofdm_present", CMD_UNCAT, 0, 0, "no desc" }, { "ofdm_txbw", CMD_PHY + CMD_CHAN + CMD_UNCAT, WLU_IOVI_DEFAULT_VALID | WLU_IOVI_BCM_INTERNAL, 2, "OFDM frame tx bandwidth; 2: 20Mhz(lower), 3: 20Mhz upper, 4: N/A, 5: 40Mhz dup" }, { "otpdump", CMD_UNCAT, 0, 0, "no desc" }, { "passive", CMD_PHY + CMD_MGMT + CMD_AP + CMD_STA, 0, 0, "no desc" }, { "pcicfgreg", CMD_UNCAT, 0, 0, "no desc" }, { "pcieclkreq", CMD_UNCAT, 0, 0, "no desc" }, { "pciegpioout", CMD_UNCAT, 0, 0, "no desc" }, { "pciegpioouten", CMD_UNCAT, 0, 0, "no desc" }, { "pciel1plldown", CMD_UNCAT, 0, 0, "no desc" }, { "pcielcreg", CMD_UNCAT, 0, 0, "no desc" }, { "pciereg", CMD_UNCAT, 0, 0, "no desc" }, { "per_chan_info", CMD_UNCAT, WLU_IOVI_READ_ONLY, 0, "Various channel attributes returned as bitfields" }, { "perm_etheraddr", CMD_UNCAT, WLU_IOVI_READ_ONLY, 0, "Permanent MAC address" }, { "phy_rssi_ant", CMD_UNCAT, 0, 0, "no desc" }, { "phy_watchdog", CMD_UNCAT, 0, 0, "no desc" }, { "phynoise_polling", CMD_UNCAT, 0, 0, "no desc" }, { "pm2_rcv_dur", CMD_POWER, WLU_IOVI_DEFAULT_VALID, 0, "power mgmt mode 2 receive duty cycle as a percentage " "(15-85%) of the beacon interval" }, { "pm2_sleep_ret", CMD_POWER, WLU_IOVI_DEFAULT_VALID, -1, "power mgmt mode 2 inactive ms before re-entering power save mode" }, { "pmkid_info", CMD_SEC, 0, 0, "pmkid cache table" }, { "qtxpower", CMD_UNCAT, 0, 0, "no desc" }, { "radarargs", CMD_PHY, 0, 0, "Radar detection parameters" }, { "radarargs40", CMD_UNCAT, 0, 0, "no desc" }, { "radar_status", CMD_PHY, WLU_IOVI_READ_ONLY, 0, "Report the status of radar detection" }, { "clear_radar_status", CMD_PHY, 0, 0, "Clear the status of radar detection" }, { "rand", CMD_ADMIN + CMD_DEV, WLU_IOVI_READ_ONLY, 0, "Generate a random number from MAC" }, { "ratesel_maxshortampdus", CMD_UNCAT, 0, 0, "no desc" }, { "ratesel_sim", CMD_UNCAT, 0, 0, "no desc" }, { "ratesel_table_index", CMD_UNCAT, 0, 0, "no desc" }, { "ratesel_table_value", CMD_UNCAT, 0, 0, "no desc" }, { "reset_d11cnts", CMD_MON + CMD_ADMIN, 0, 0, "Resets the IEEE 802.11 MIB counters" }, { "rfdisabledly", CMD_UNCAT, 0, 0, "no desc" }, { "rifs", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "EWC spec to reduce tx interframe gap; it implies no-ack" }, { "rm_rep", CMD_PHY + CMD_MON, 0, 0, "no desc" }, { "rm_req", CMD_PHY + CMD_MON, 0, 0, "no desc" }, { "rtsthresh", CMD_UNCAT, 0, 0, "no desc" }, { "scan_assoc_time", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 20, "Dwell time in ms when channel scanning" }, { "scan_home_time", CMD_PHY + CMD_CHAN, WLU_IOVI_DEFAULT_VALID, 20, "Dwell time on home BSS channel" }, { "scan_nprobes", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 2, "Number of probe requests sent during the dwell time on an actively scanned channel" }, { "scan_passive_time", CMD_PHY + CMD_CHAN, WLU_IOVI_DEFAULT_VALID, 250, "Dwell time in ms for each channel passively scanned" }, { "scan_unassoc_time", CMD_PHY + CMD_CHAN, WLU_IOVI_DEFAULT_VALID, 20, "Dwell time in ms for each channel actively scanned when not participating in a BSS" }, { "scanresults_minrssi", CMD_UNCAT, 0, 0, "no desc" }, { "scb_activity_time", CMD_UNCAT, 0, 0, "no desc" }, { "sd_cis", CMD_UNCAT, 0, 0, "no desc" }, { "sd_drivestrength", CMD_DEV, 0, 0, "SDIO drive strength in mA(2mA-12mA), in 2mA increment" }, { "serdespllreg", CMD_UNCAT, 0, 0, "no desc" }, { "serdesrxreg", CMD_UNCAT, 0, 0, "no desc" }, { "serdestxreg", CMD_UNCAT, 0, 0, "no desc" }, { "slow_timer", CMD_UNCAT, 0, 0, "no desc" }, { "ssid", CMD_DEV, 0, 0, "BSS configuration's SSID; can only be changed when the indexed BSS is disabled" }, { "ssidmask", CMD_UNCAT, 0, 0, "no desc" }, { "sta_info", CMD_MON + CMD_STA, WLU_IOVI_READ_ONLY, 0, "Gives station info based on MAC" }, { "sta_retry_time", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Time in seconds before retry after failed assoc attempt" }, { "staname", CMD_MGMT + CMD_MON + CMD_STA, 0, 0, "The station name; max 16 bytes" }, { "sup_auth_status", CMD_UNCAT, 0, 0, "no desc" }, { "sup_auth_status_ext", CMD_UNCAT, 0, 0, "Extended in-driver supplicant authentication status" }, { "sup_wpa", CMD_UNCAT, 0, 0, "no desc" }, { "test_s60", CMD_UNCAT, 0, 0, "no desc" }, { "txburst_limit", CMD_UNCAT, 0, 0, "get current Tx Burst Limit setting; 0: off, 1: on" }, { "txburst_limit_override", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, -1, "State of txburst_limit_override; -1: auto, 0: off, 1: on" }, { "crash", CMD_UNCAT, WLU_IOVI_WRITE_ONLY, 0, "Force crash; 0: oops, 1: ASSERT" }, { "txc", CMD_UNCAT, 0, 0, "no desc" }, { "txc_policy", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 1, "no desc" }, { "txc_sticky", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "no desc" }, { "txfifo_sz", CMD_UNCAT, 0, 0, "no desc" }, { "txinstpwr", CMD_PHY + CMD_POWER, WLU_IOVI_READ_ONLY, 0, "Power output based on current TSSI" }, { "txmaxpkts", CMD_UNCAT, 0, 0, "no desc" }, { "vblanktsf", CMD_UNCAT, 0, 0, "no desc" }, { "ver", CMD_UNCAT, 0, 0, "no desc" }, { "vlan_mode", CMD_UNCAT, 0, 0, "Should driver strip priority tags (VLAN ID zero)" }, { "vndr_ie", CMD_UNCAT, 0, 0, "Access vendor proprietary IEs to 802.11 Management Packets transmitted from the AP" }, { "wds_wpa_role", CMD_MGMT + CMD_SEC, 0, 0, "no desc" }, { "wdstimeout", CMD_UNCAT, 0, 0, "no desc" }, { "wet", CMD_MGMT + CMD_SEC, WLU_IOVI_DEFAULT_VALID, 0, "Wireless ethernet support; wl must be in STA mode" }, { "wet_host_ipv4", CMD_UNCAT, 0, 0, "Enable WET client DHCP relay agent" }, { "wet_host_mac", CMD_UNCAT, 0, 0, "Enable WET host DHCP relay agent" }, { "wlan_assoc_reason", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "CCXv4 assocation reason codes" }, { "wlfeatureflag", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Flags defined in wlioctl.h" }, { "wme", CMD_WME, WLU_IOVI_DEFAULT_VALID, 0, "Media extension modes; -1: auto, 1: enabled, 0: disabled" }, { "wme_ac_ap", CMD_UNCAT, 0, 0, "Access class parameters for AP" }, { "wme_ac_sta", CMD_UNCAT, 0, 0, "Access class parameters for STA" }, { "wme_apsd", CMD_PHY + CMD_POWER + CMD_WME + CMD_AP, WLU_IOVI_DEFAULT_VALID, 1, "no desc" }, { "wme_bss_disable", CMD_WME, WLU_IOVI_DEFAULT_VALID, 0, "Disable WMM/WME advertising for a specific BSS (if wme is enabled in the system)" }, { "wme_clear_counters", CMD_WME + CMD_MON + CMD_ADMIN, WLU_IOVI_BCM_INTERNAL, 0, "Clear WMM counters" }, { "wme_counters", CMD_WME + CMD_MON + CMD_ADMIN, WLU_IOVI_READ_ONLY | WLU_IOVI_BCM_INTERNAL, 0, "Get WME counters maintained by the driver" }, { "wme_dp", CMD_WME, WLU_IOVI_DEFAULT_VALID, 0, "Bitmap discard policy per AC; 0: newest 1: oldest; [3:0]: VO VI BK BE" }, { "wme_noack", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Enable no-ack WME mode" }, { "wme_prec_queuing", CMD_UNCAT, 0, 0, "no desc" }, { "wme_qosinfo", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Power save delivery info, per access class" }, { "wme_sta_list", CMD_UNCAT, 0, 0, "Get the WME STA list; AP only" }, { "wme_tx_params", CMD_WME, 0, 0, "Set/get per-AC TX retry and max rate parameters" }, { "wpa_auth", CMD_MGMT + CMD_SEC, WLU_IOVI_DEFAULT_VALID, 0, "WPA authentication mode" }, { "wme_maxbw_params", CMD_WME, WLU_IOVI_BCM_INTERNAL, 0, "Set/get per-AC max bandwidth" }, { "wpa_cap", CMD_MGMT + CMD_SEC, WLU_IOVI_DEFAULT_VALID, 0, "RSN capability advertisement; see 802.11 RSN info fields" }, { "wpa_msgs", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Enable WPA event notification to external supp/auth" }, { "wpaie", CMD_UNCAT, 0, 0, "Info element for WPA associated with E_ASSOC_IND event; Set is STA only" }, { "wsec", CMD_MGMT + CMD_SEC, WLU_IOVI_DEFAULT_VALID, 0, "Encryption types for BSS config" }, { "wsec_authorization", CMD_UNCAT, 0, 0, "Convey auth status between upper layers" }, { "wsec_key", CMD_UNCAT, WLU_IOVI_WRITE_ONLY, 0, "Add or delete a wsec key" }, { "wsec_restrict", CMD_MGMT + CMD_SEC, WLU_IOVI_DEFAULT_VALID, 0, "Drop unencrypted packets when WSEC is enabled in bsscfg" }, { "40_intolerant", CMD_UNCAT, 0, 0, "Device is 40Mhz Intolerant in the 2.4G Band" }, { "40_intolerant_detected", CMD_UNCAT, WLU_IOVI_READ_ONLY, 0, "Indicates if another 40Mhz Intolerant device has been detected" }, { "btc_params", CMD_UNCAT, 0, 0, "Bluetooth coexistance parameters" }, { "btc_flags", CMD_UNCAT, 0, 0, "Bluetooth coexistance flags" }, { "brcm_ie", CMD_UNCAT, WLU_IOVI_DEFAULT_VALID, 0, "Enables brcm ie in the auth requests sent by the sta" } }; int wlu_iov_info_count = ARRAYSIZE(wlu_iov_info); #endif /* BCMINTERNAL */