NODEID = 00 E0 4C 36 00 01
;ENDID = 00 E0 4C 36 FF FF
VID = 10 EC
DID = 81 36
SVID = 10 EC
SMID = 01 23

;Do not change following parameters without Realtek approval
CONFIG0 = 00
CONFIG1 = 0F
CONFIGx = 1C
CONFIG3 = 60
CONFIG4 = 14
CONFIG5 = 82
;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
;CONFIG5 = 8A

PMC = C3 FF
ROMBAR = 00
;LEDCFG = High-Byte(19H) Low-Byte(18H)
LEDCFG = 98 CA
ROMCONF = 3F
;Bit 7-6    Boot Protocol
;           00 ==> PXE protocol
;           01 ==> RPL protocol
;Bit 5-4    Boot order (method)
;           00 ==> ROM disable
;           01 ==> Int 18h
;           10 ==> Int 19h
;           11 ==> PnP/BEV(BBS)
;Bit 3      Show Config Message
;           0 ==> Enable
;           1 ==> Disable
;Bit 2      Shift+F10 Menu Entry
;           0 ==> Enable
;           1 ==> Disable
;Bit 1-0    Show Config Time
;           00 ==> 3 Seconds
;           01 ==> 5 Seconds
;           10 ==> 1 Seconds
;           11 ==> 0 Second

;Serial Number in PCI Config Space
SN = 00 E0 4C 36 00 00 00 01

;PCI-E Parameter (Do not change without Realtek approval)
C_PCIE0 = 04 01
;0AH~0BH
C_PCIE1 = C0 8C 80 02 00 00 11 3C 07 00 10 20
;1AH~25H
C_PCIE2 = 76 00 63 01 01 FF    13 AA 03 02 20
;26H~2BH 2DH~31H
C_PCIE3 = 80 02 00 20 04 40 20 00 04 40 20   00 00 20
;34H~3EH 40H~42H
C_PCIE4 = 60 00 0A 00   00 00
;46H~49H  52~53H
C_EPHY = B9 6A 98     AC 6B 75 80
;43H~45H 54H~57H
D_EPHY = 8D 75 7B 01
;58H~5BH
E0_EPHY = 48
;5EH
VERSION = 1.031