Support RK3588 Orange Pi 5 Plus

external/cache/sources/linuxpg/8125BGEF.cfg

@@ -2,20 +2,20 @@ NODEID = 00 E0 4C 68 00 0F
 ;ENDID = 00 E0 4C 68 FF FF
 ;VID = 10 EC
 ;DID = 81 25
-SVID = 10 EC
-SMID = 01 23
+;SVID = 10 EC
+;SMID = 01 23
 
 ;Do not change following parameters without Realtek approval
 ;CONFIG0 = 00
 ;CONFIG1 = CF
-CONFIGx = 3C
+;CONFIGx = 3C
 ;For add-on device, please set CONFIG3 to 60H
 ;CONFIG3 = 60
 ;CONFIG4 = 14
 ;CONFIG5 = 02
 ;If PXE is enabled, set spi_en (IO reg offset 0x56 bit 3 set to 1) to 1
 ;CONFIG5 = 0A
-CONFIG7 = 07
+;CONFIG7 = 07
 ;PMC = C3 FF
 ;ROMBAR = 00
 ;LEDXCFG = High-Byte Low-Byte
@@ -32,7 +32,7 @@ LED2CFG = 1A 2B
 ;Set BIT 0 to 1 : V2 led table.
 ;BIT 1 to BIT 7 : Reserved
 ;LEDFEATUREFUNC = 60
-ROMCONF = 3F
+;ROMCONF = 3F
 ;Bit 7-6    Boot Protocol
 ;           00 ==> PXE protocol
 ;           01 ==> RPL protocol
@@ -54,7 +54,7 @@ ROMCONF = 3F
 ;           11 ==> 0 Second
 
 ;Serial Number in PCI Config Space
-SN = 00 E0 4C 68 00 00 00 01
+;SN = 00 E0 4C 68 00 00 00 01
 
 ;LANCFG
 ;BIT 0:LAN Disable     BIT 1:PHY Disable    BIT 2:Link OK