Support RK3588S Orange Pi 5

This commit is contained in:
orangepi-xunlong
2022-12-02 19:51:41 +08:00
parent 564f03addc
commit 35069ec81c
128 changed files with 17176 additions and 258 deletions

View File

@@ -0,0 +1,29 @@
#!/bin/bash
if [[ -z $1 ]]; then
user=root
else
user=$1
fi
[[ -d /lib/systemd/system/getty@.service.d/ ]] && rm /lib/systemd/system/getty@.service.d/ -rf
[[ -f /lib/systemd/system/serial-getty@.service.d/override.conf ]] && rm /lib/systemd/system/serial-getty@.service.d/override.conf -f
[[ -d /etc/systemd/system/getty@.service.d/ ]] && rm /etc/systemd/system/getty@.service.d/ -rf
[[ -f /etc/systemd/system/serial-getty@.service.d/override.conf ]] && rm /etc/systemd/system/serial-getty@.service.d/override.conf -f
if [[ $1 == "-d" ]]; then
exit
fi
mkdir -p /etc/systemd/system/getty@.service.d/
mkdir -p /etc/systemd/system/serial-getty@.service.d/
cat <<-EOF > \
/etc/systemd/system/serial-getty@.service.d/override.conf
[Service]
ExecStartPre=/bin/sh -c 'exec /bin/sleep 10'
ExecStart=
ExecStart=-/sbin/agetty --noissue --autologin ${user} %I \$TERM
Type=idle
EOF
cp /etc/systemd/system/serial-getty@.service.d/override.conf \
/etc/systemd/system/getty@.service.d/override.conf

Binary file not shown.

View File

@@ -0,0 +1,3 @@
#!/bin/bash
cat /proc/cpuinfo | grep "Serial"

View File

@@ -0,0 +1,20 @@
#!/bin/bash
sudo apt-get update
sudo apt-get install -y build-essential zlib1g-dev \
libncurses5-dev libgdbm-dev libnss3-dev libssl-dev libsqlite3-dev \
libreadline-dev libffi-dev curl libbz2-dev
version=3.9.9
[[ -n $1 ]] && version=$1
# optimize build time with 100% CPU usage
CPUS=$(grep -c 'processor' /proc/cpuinfo)
CTHREADS="-j$((CPUS + CPUS/2))"
wget https://cdn.npmmirror.com/binaries/python/$version/Python-${version}.tgz
tar xvf Python-${version}.tgz
cd Python-${version}
./configure --enable-optimizations
make ${CTHREADS}
sudo make altinstall

View File

@@ -0,0 +1,11 @@
#!/bin/bash
if [[ -z $1 ]]; then
user=root
else
user=$1
fi
sudo sed -i '/autologin-user=/d' /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
sudo echo autologin-user=${user} >> /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
sudo sed -i 's/root/anything/' /etc/pam.d/lightdm-autologin

View File

@@ -0,0 +1,5 @@
#!/bin/bash
sudo sed -i \
"s/autologin-user=orangepi/#autologin-user=orangepi/" \
/etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf

View File

@@ -0,0 +1,77 @@
#!/bin/bash -x
export DISPLAY=${DISPLAY:-:0}
function prepare_env() {
# Try to figure out XAUTHORITY and DISPLAY
for pid in $(pgrep X 2>/dev/null || \
ls /proc|grep -ow "[0-9]*"|sort -rn); do
PROC_DIR=/proc/$pid
# Filter out non-X processes
readlink $PROC_DIR/exe|grep -qwE "X$|Xorg$" || continue
# Parse auth file and display from cmd args
export XAUTHORITY=$(cat $PROC_DIR/cmdline|tr '\0' '\n'| \
grep -w "\-auth" -A 1|tail -1)
export DISPLAY=$(cat $PROC_DIR/cmdline|tr '\0' '\n'| \
grep -w "^:.*" || echo ":0")
logger -t $0 "Found auth: $XAUTHORITY for dpy: $DISPLAY"
return
done
}
function xrandr_wrapper() {
xrandr --screen ${SCREEN:-0} $@
}
if ! xdpyinfo &>/dev/null; then
# Try to setup env
prepare_env
if ! xdpyinfo &>/dev/null; then
# Try to switch to an authorized user
for XUSER in root $(users);do
sudo -u $XUSER xdpyinfo &>/dev/null || continue
logger -t $0 "Switch to user: $XUSER"
sudo -u $XUSER $0; exit 0
done
logger -t $0 "Unable to contact Xserver!"
exit 0
fi
fi
TMP=$(mktemp)
SCREENS=$(xdpyinfo|grep screens|cut -d':' -f2)
for SCREEN in $(seq 0 ${SCREENS:-0}); do
# Get monitors and current mode info
xrandr_wrapper 2>&1|grep -oE "^.*connected|^.*\*"|tee $TMP
# Result:
# eDP-1 connected
# 1536x2048 59.99*
# DP-1 disconnected
# HDMI-1 connected
# 1920x1080 60.00*
#
# "*" means valid current mode.
# Make sure every connected monitors been enabled with a valid mode.
for MONITOR in $(grep -w connected $TMP|cut -d' ' -f1); do
# Find monitors without a valid current mode
if ! grep -w $MONITOR $TMP -A 1|grep "\*"; then
# Ether disabled or wrongly configured
xrandr_wrapper --output $MONITOR --auto
logger -t $0 "Output $MONITOR enabled."
fi
done
done
rm -rf $TMP
exit 0

View File

@@ -0,0 +1,3 @@
#!/bin/bash
sudo systemctl enable docker.service

View File

@@ -0,0 +1,4 @@
#!/bin/bash
wget -O install.sh \
http://download.bt.cn/install/install-ubuntu_6.0.sh && sudo bash install.sh

View File

@@ -0,0 +1,22 @@
#!/bin/bash
source /etc/orangepi-release
sudo apt-get remove -y docker docker-engine docker-ce docker.io
sudo apt-get update
sudo apt-get install -y apt-transport-https ca-certificates curl gnupg lsb-release
codename=$(lsb_release -cs)
distributor_id=$(lsb_release -is)
distributor_id=${distributor_id,}
curl -fsSL http://mirrors.aliyun.com/docker-ce/linux/${distributor_id}/gpg | sudo apt-key add -
echo "deb [arch=$(dpkg --print-architecture) \
signed-by=/usr/share/keyrings/docker-archive-keyring.gpg] \
https://mirrors.aliyun.com/docker-ce/linux/${distributor_id} \
${codename} stable" | sudo tee /etc/apt/sources.list.d/docker.list > /dev/null
apt-get update
apt-get install -y docker-ce docker-ce-cli containerd.io
sudo usermod -aG docker $USER

BIN
external/packages/bsp/rk3588/usr/local/bin/io vendored Executable file

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View File

@@ -0,0 +1,4 @@
#!/bin/bash
sudo rm /etc/ssh/ssh_host_*
sudo dpkg-reconfigure openssh-server

Binary file not shown.

Binary file not shown.

View File

@@ -0,0 +1,11 @@
#!/bin/bash
export DISPLAY=:0.0
#export GST_DEBUG=*:5
#export GST_DEBUG_FILE=/tmp/2.txt
echo "Start MIPI CSI Camera Preview!"
export XDG_RUNTIME_DIR=/run/user/1000
gst-launch-1.0 v4l2src device=/dev/video11 io-mode=4 ! queue ! video/x-raw,format=NV12,width=2112,height=1568,framerate=30/1 ! glimagesink

View File

@@ -0,0 +1,7 @@
#!/bin/sh
echo "Start RKNN_DEMO Camera Preview!"
echo performance | tee $(find /sys/ -name *governor)
sudo service lightdm stop
/usr/bin/npu_transfer_proxy&
rknn_demo

View File

@@ -0,0 +1,13 @@
#!/bin/sh
export DISPLAY=:0.0
#export GST_DEBUG=*:5
#export GST_DEBUG_FILE=/tmp/2.txt
# server:
# vlc v4l2:// :v4l2-dev=/dev/video0 :v4l2-width=640 \
# :v4l2-height=480 --sout="#transcode{vcodec=h264,vb=800,scale=1,\
# acodec=mp4a,ab=128,channels=2,samplerate=44100}:rtp{sdp=rtsp://:8554/}" -I dummy
gst-launch-1.0 rtspsrc location=rtsp://192.168.31.163:8554/ ! \
! rtph264depay ! h264parse ! mppvideodec ! rkximagesink sync=false

Binary file not shown.

Binary file not shown.

Binary file not shown.

Binary file not shown.

View File

@@ -0,0 +1,3 @@
#!/bin/bash
echo host > /sys/kernel/debug/usb/fc000000.usb/mode