diff --git a/external/config/sources/families/sun50iw9.conf b/external/config/sources/families/sun50iw9.conf
index 34465fe..0b135b7 100644
--- a/external/config/sources/families/sun50iw9.conf
+++ b/external/config/sources/families/sun50iw9.conf
@@ -40,6 +40,12 @@ family_tweaks_s()
 
                 chroot $SDCARD /bin/bash -c "systemctl --no-reload enable hdmi-audio.service >/dev/null 2>&1"
         fi
+
+	if [[ ${BUILD_DESKTOP} == yes ]]; then
+
+		cp ${EXTER}/packages/blobs/sunxi/h616/pulseaudio/default.pa-${BOARD} ${SDCARD}/etc/pulse/default.pa
+		cp ${EXTER}/packages/blobs/sunxi/h616/pulseaudio/default.conf ${SDCARD}/usr/share/pulseaudio/alsa-mixer/profile-sets/
+	fi
 }
 
 family_tweaks_bsp()
@@ -53,5 +59,6 @@ family_tweaks_bsp()
 		install -m 755 $EXTER/packages/blobs/sunxi/h616/inithdmiaudio $destination/usr/bin/
 		cp $EXTER/packages/blobs/sunxi/h616/libtinyalsa.so $destination/usr/lib/
                 cp $EXTER/packages/bsp/sunxi/hdmi-audio.service $destination/lib/systemd/system/
+
         fi
 }
diff --git a/external/packages/blobs/sunxi/h616/pulseaudio/default.conf b/external/packages/blobs/sunxi/h616/pulseaudio/default.conf
new file mode 100644
index 0000000..adab1f5
--- /dev/null
+++ b/external/packages/blobs/sunxi/h616/pulseaudio/default.conf
@@ -0,0 +1,476 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+; Default profile definitions for the ALSA backend of PulseAudio. This
+; is used as fallback for all cards that have no special mapping
+; assigned (and should be good enough for the vast majority of
+; cards). If you want to assign a different profile set than this one
+; to a device, either set the udev property PULSE_PROFILE_SET for the
+; card, or use the "profile_set" module argument when loading
+; module-alsa-card.
+;
+; So what is this about? Simply, what we do here is map ALSA devices
+; to how they are exposed in PA. We say which ALSA device string to
+; use to open a device, which channel mapping to use then, and which
+; mixer path to use. This is encoded in a 'mapping'. Multiple of these
+; mappings can be bound together in a 'profile' which is then directly
+; exposed in the UI as a card profile. Each mapping assigned to a
+; profile will result in one sink/source to be created if the profile
+; is selected for the card.
+;
+; Additionally, the path set configuration files can describe the
+; decibel values assigned to the steps of the volume elements. This
+; can be used to work around situations when the alsa driver doesn't
+; provide any decibel information, or when the information is
+; incorrect.
+
+
+; [General]
+; auto-profiles = no | yes                  # Instead of defining all profiles manually, autogenerate
+;                                           # them by combining every input mapping with every output mapping.
+;
+; [Mapping id]
+; device-strings = ...                      # ALSA device string. %f will be replaced by the card identifier.
+; channel-map = ...                         # Channel mapping to use for this device
+; description = ...
+; paths-input = ...                         # A list of mixer paths to use. Every path in this list will be probed.
+;                                           # If multiple are found to be working they will be available as device ports
+; paths-output = ...
+; element-input = ...                       # Instead of configuring a full mixer path simply configure a single
+;                                           # mixer element for volume/mute handling
+; element-output = ...
+; priority = ...
+; direction = any | input | output          # Only useful for?
+;
+; exact-channels = yes | no                 # If no, and the exact number of channels is not supported,
+;                                           # allow device to be opened with another channel count
+; fallback = no | yes                       # This mapping will only be considered if all non-fallback mappings fail
+; [Profile id]
+; input-mappings = ...                      # Lists mappings for sources on this profile, those mapping must be
+;                                           # defined in this file too
+; output-mappings = ...                     # Lists mappings for sinks on this profile, those mappings must be
+;                                           # defined in this file too
+; description = ...
+; priority = ...                            # Numeric value to deduce priority for this profile
+; skip-probe = no | yes                     # Skip probing for availability? If this is yes then this profile
+;                                           # will be assumed as working without probing. Makes initialization
+;                                           # a bit faster but only works if the card is really known well.
+;
+; fallback = no | yes                       # This profile will only be considered if all non-fallback profiles fail
+; [DecibelFix element]                      # Decibel fixes can be used to work around missing or incorrect dB
+;                                           # information from alsa. A decibel fix is a table that maps volume steps
+;                                           # to decibel values for one volume element. The "element" part in the
+;                                           # section title is the name of the volume element.
+;                                           #
+;                                           # NOTE: This feature is meant just as a help for figuring out the correct
+;                                           # decibel values. PulseAudio is not the correct place to maintain the
+;                                           # decibel mappings!
+;                                           #
+;                                           # If you need this feature, then you should make sure that when you have
+;                                           # the correct values figured out, the alsa driver developers get informed
+;                                           # too, so that they can fix the driver.
+;
+; db-values = ...                           # The option value consists of pairs of step numbers and decibel values.
+;                                           # The pairs are separated with whitespace, and steps are separated from
+;                                           # the corresponding decibel values with a colon. The values must be in an
+;                                           # increasing order. Here's an example of a valid string:
+;                                           #
+;                                           #     "0:-40.50  1:-38.70  3:-33.00  11:0"
+;                                           #
+;                                           # The lowest step imposes a lower limit for hardware volume and the
+;                                           # highest step correspondingly imposes a higher limit. That means that
+;                                           # that the mixer will never be set outside those values - the rest of the
+;                                           # volume scale is done using software volume.
+;                                           #
+;                                           # As can be seen in the example, you don't need to specify a dB value for
+;                                           # each step. The dB values for skipped steps will be linearly interpolated
+;                                           # using the nearest steps that are given.
+
+[General]
+auto-profiles = no
+
+[Mapping analog-mono]
+device-strings = hw:%f
+channel-map = mono
+paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2 analog-output-mono
+paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headset-mic
+priority = 2
+
+[Mapping analog-stereo]
+device-strings = front:%f
+channel-map = left,right
+paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
+paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
+priority = 10
+
+# If everything else fails, try to use hw:0 as a stereo device.
+[Mapping stereo-fallback]
+device-strings = hw:%f
+fallback = yes
+channel-map = front-left,front-right
+paths-output = analog-output analog-output-lineout analog-output-speaker analog-output-headphones analog-output-headphones-2
+paths-input = analog-input-front-mic analog-input-rear-mic analog-input-internal-mic analog-input-dock-mic analog-input analog-input-mic analog-input-linein analog-input-aux analog-input-video analog-input-tvtuner analog-input-fm analog-input-mic-line analog-input-headphone-mic analog-input-headset-mic
+priority = 1
+
+[Mapping analog-surround-21]
+device-strings = surround21:%f
+channel-map = front-left,front-right,lfe
+paths-output = analog-output analog-output-lineout analog-output-speaker
+priority = 8
+direction = output
+
+[Mapping analog-surround-40]
+device-strings = surround40:%f
+channel-map = front-left,front-right,rear-left,rear-right
+paths-output = analog-output analog-output-lineout analog-output-speaker
+priority = 7
+direction = output
+
+[Mapping analog-surround-41]
+device-strings = surround41:%f
+channel-map = front-left,front-right,rear-left,rear-right,lfe
+paths-output = analog-output analog-output-lineout analog-output-speaker
+priority = 8
+direction = output
+
+[Mapping analog-surround-50]
+device-strings = surround50:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center
+paths-output = analog-output analog-output-lineout analog-output-speaker
+priority = 7
+direction = output
+
+[Mapping analog-surround-51]
+device-strings = surround51:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+paths-output = analog-output analog-output-lineout analog-output-speaker
+priority = 8
+direction = output
+
+[Mapping analog-surround-71]
+device-strings = surround71:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+description = Analog Surround 7.1
+paths-output = analog-output analog-output-lineout analog-output-speaker
+priority = 7
+direction = output
+
+[Mapping iec958-stereo]
+device-strings = iec958:%f
+channel-map = left,right
+paths-input = iec958-stereo-input
+paths-output = iec958-stereo-output
+priority = 5
+
+[Mapping iec958-ac3-surround-40]
+device-strings = a52:%f
+channel-map = front-left,front-right,rear-left,rear-right
+paths-output = iec958-stereo-output
+priority = 2
+direction = output
+
+[Mapping iec958-ac3-surround-51]
+device-strings = a52:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+paths-output = iec958-stereo-output
+priority = 3
+direction = output
+
+[Mapping iec958-dts-surround-51]
+device-strings = dca:%f
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+paths-output = iec958-stereo-output
+priority = 3
+direction = output
+
+[Mapping hdmi-stereo]
+description = Digital Stereo (HDMI)
+device-strings = hdmi:%f
+paths-output = hdmi-output-0
+channel-map = left,right
+priority = 4
+direction = output
+
+[Mapping hdmi-surround]
+description = Digital Surround 5.1 (HDMI)
+device-strings = hdmi:%f
+paths-output = hdmi-output-0
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 3
+direction = output
+
+[Mapping hdmi-surround71]
+description = Digital Surround 7.1 (HDMI)
+device-strings = hdmi:%f
+paths-output = hdmi-output-0
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 3
+direction = output
+
+[Mapping hdmi-dts-surround]
+description = Digital Surround 5.1 (HDMI/DTS)
+device-strings = dcahdmi:%f
+paths-output = hdmi-output-0
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-stereo-extra1]
+description = Digital Stereo (HDMI 2)
+device-strings = hdmi:%f,1
+paths-output = hdmi-output-1
+channel-map = left,right
+priority = 2
+direction = output
+
+[Mapping hdmi-surround-extra1]
+description = Digital Surround 5.1 (HDMI 2)
+device-strings = hdmi:%f,1
+paths-output = hdmi-output-1
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-surround71-extra1]
+description = Digital Surround 7.1 (HDMI 2)
+device-strings = hdmi:%f,1
+paths-output = hdmi-output-1
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 1
+direction = output
+
+[Mapping hdmi-dts-surround-extra1]
+description = Digital Surround 5.1 (HDMI 2/DTS)
+device-strings = dcahdmi:%f,1
+paths-output = hdmi-output-1
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-stereo-extra2]
+description = Digital Stereo (HDMI 3)
+device-strings = hdmi:%f,2
+paths-output = hdmi-output-2
+channel-map = left,right
+priority = 2
+direction = output
+
+[Mapping hdmi-surround-extra2]
+description = Digital Surround 5.1 (HDMI 3)
+device-strings = hdmi:%f,2
+paths-output = hdmi-output-2
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-surround71-extra2]
+description = Digital Surround 7.1 (HDMI 3)
+device-strings = hdmi:%f,2
+paths-output = hdmi-output-2
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 1
+direction = output
+
+[Mapping hdmi-dts-surround-extra2]
+description = Digital Surround 5.1 (HDMI 3/DTS)
+device-strings = dcahdmi:%f,2
+paths-output = hdmi-output-2
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-stereo-extra3]
+description = Digital Stereo (HDMI 4)
+device-strings = hdmi:%f,3
+paths-output = hdmi-output-3
+channel-map = left,right
+priority = 2
+direction = output
+
+[Mapping hdmi-surround-extra3]
+description = Digital Surround 5.1 (HDMI 4)
+device-strings = hdmi:%f,3
+paths-output = hdmi-output-3
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-surround71-extra3]
+description = Digital Surround 7.1 (HDMI 4)
+device-strings = hdmi:%f,3
+paths-output = hdmi-output-3
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 1
+direction = output
+
+[Mapping hdmi-dts-surround-extra3]
+description = Digital Surround 5.1 (HDMI 4/DTS)
+device-strings = dcahdmi:%f,3
+paths-output = hdmi-output-3
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-stereo-extra4]
+description = Digital Stereo (HDMI 5)
+device-strings = hdmi:%f,4
+paths-output = hdmi-output-4
+channel-map = left,right
+priority = 2
+direction = output
+
+[Mapping hdmi-surround-extra4]
+description = Digital Surround 5.1 (HDMI 5)
+device-strings = hdmi:%f,4
+paths-output = hdmi-output-4
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-surround71-extra4]
+description = Digital Surround 7.1 (HDMI 5)
+device-strings = hdmi:%f,4
+paths-output = hdmi-output-4
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 1
+direction = output
+
+[Mapping hdmi-dts-surround-extra4]
+description = Digital Surround 5.1 (HDMI 5/DTS)
+device-strings = dcahdmi:%f,4
+paths-output = hdmi-output-4
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-stereo-extra5]
+description = Digital Stereo (HDMI 6)
+device-strings = hdmi:%f,5
+paths-output = hdmi-output-5
+channel-map = left,right
+priority = 2
+direction = output
+
+[Mapping hdmi-surround-extra5]
+description = Digital Surround 5.1 (HDMI 6)
+device-strings = hdmi:%f,5
+paths-output = hdmi-output-5
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-surround71-extra5]
+description = Digital Surround 7.1 (HDMI 6)
+device-strings = hdmi:%f,5
+paths-output = hdmi-output-5
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 1
+direction = output
+
+[Mapping hdmi-dts-surround-extra5]
+description = Digital Surround 5.1 (HDMI 6/DTS)
+device-strings = dcahdmi:%f,5
+paths-output = hdmi-output-5
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-stereo-extra6]
+description = Digital Stereo (HDMI 7)
+device-strings = hdmi:%f,6
+paths-output = hdmi-output-6
+channel-map = left,right
+priority = 2
+direction = output
+
+[Mapping hdmi-surround-extra6]
+description = Digital Surround 5.1 (HDMI 7)
+device-strings = hdmi:%f,6
+paths-output = hdmi-output-6
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-surround71-extra6]
+description = Digital Surround 7.1 (HDMI 7)
+device-strings = hdmi:%f,6
+paths-output = hdmi-output-6
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 1
+direction = output
+
+[Mapping hdmi-dts-surround-extra6]
+description = Digital Surround 5.1 (HDMI 7/DTS)
+device-strings = dcahdmi:%f,6
+paths-output = hdmi-output-6
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-stereo-extra7]
+description = Digital Stereo (HDMI 8)
+device-strings = hdmi:%f,7
+paths-output = hdmi-output-7
+channel-map = left,right
+priority = 2
+direction = output
+
+[Mapping hdmi-surround-extra7]
+description = Digital Surround 5.1 (HDMI 8)
+device-strings = hdmi:%f,7
+paths-output = hdmi-output-7
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping hdmi-surround71-extra7]
+description = Digital Surround 7.1 (HDMI 8)
+device-strings = hdmi:%f,7
+paths-output = hdmi-output-7
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe,side-left,side-right
+priority = 1
+direction = output
+
+[Mapping hdmi-dts-surround-extra7]
+description = Digital Surround 5.1 (HDMI 8/DTS)
+device-strings = dcahdmi:%f,7
+paths-output = hdmi-output-7
+channel-map = front-left,front-right,rear-left,rear-right,front-center,lfe
+priority = 1
+direction = output
+
+[Mapping multichannel-output]
+device-strings = hw:%f
+channel-map = left,right,rear-left,rear-right
+exact-channels = false
+fallback = yes
+priority = 1
+direction = output
+paths-output = multichannel-output
+
+[Mapping multichannel-input]
+device-strings = hw:%f
+channel-map = left,right,rear-left,rear-right
+exact-channels = false
+fallback = yes
+priority = 1
+direction = input
+paths-input = multichannel-input
+
+; An example for defining multiple-sink profiles
+#[Profile output:analog-stereo+output:iec958-stereo+input:analog-stereo]
+#description = Foobar
+#output-mappings = analog-stereo iec958-stereo
+#input-mappings = analog-stereo
diff --git a/external/packages/blobs/sunxi/h616/pulseaudio/default.pa-orangepizero2 b/external/packages/blobs/sunxi/h616/pulseaudio/default.pa-orangepizero2
new file mode 100644
index 0000000..eccdc51
--- /dev/null
+++ b/external/packages/blobs/sunxi/h616/pulseaudio/default.pa-orangepizero2
@@ -0,0 +1,154 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+### Should be after module-*-restore but before module-*-detect
+load-module module-switch-on-port-available
+
+### Use hot-plugged devices like Bluetooth or USB automatically (LP: #1702794)
+.ifexists module-switch-on-connect.so
+load-module module-switch-on-connect
+.endif
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+load-module module-alsa-sink device=hw:0,0 sink_name=AudioCodec-Playback sink_properties="device.description='AudioCodec'"
+load-module module-alsa-sink device=hw:1,0 sink_name=HDMI-Playback sink_properties="device.description='HDMI'"
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect tsched=0
+.else
+### Use the static hardware detection module (for systems that lack udev support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-policy.so
+load-module module-bluetooth-policy
+.endif
+
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+#load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GConf settings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gconf.so
+.nofail
+load-module module-gconf
+.fail
+.endif
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Block audio recording for snap confined packages unless they have
+### the "pulseaudio" or "audio-record" interfaces plugged.
+.ifexists module-snap-policy.so
+load-module module-snap-policy
+.endif
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Make some devices default
+#set-default-sink output
+#set-default-source input