Bump to next branch

Host: Ubuntu 21.04
This commit is contained in:
orangepi-xunlong
2022-03-07 16:26:01 +08:00
parent 812e231da2
commit 206214916c
615 changed files with 61837 additions and 2426 deletions

View File

@@ -1,23 +0,0 @@
#!/usr/bin/env bash
# With offloading enabled, Samba becomes completely useless - transfers to a Windows PC freezes randomly
# Disabling offloading should solve this - all RK3399
IFACE=$1
EVENT=$2
if [[ "$EVENT" != "up" ]]; then
exit 1
fi
if linux-version compare $(uname -r | cut -d '.' -f1,2) gt 4.4; then
exit 1
fi
ETHTOOL=/sbin/ethtool
[ -f $ETHTOOL ] || exit 2
[ -d /sys/devices/platform/fe300000.ethernet/net/$IFACE ] || exit 3
$ETHTOOL -K $IFACE rx off tx off
exit 0

View File

@@ -1,2 +1,3 @@
Acquire::GzipIndexes "true";
Acquire::CompressionTypes::Order:: "gz";
APT::Compressor::gzip::Cost "10";

View File

@@ -19,4 +19,5 @@ APT::Periodic::AutocleanInterval "120";
// Define basic patterns
Unattended-Upgrade::Origins-Pattern {
"origin=${distro_id},codename=${distro_codename}";
"origin=OrangePi";
};

View File

@@ -1,2 +1,4 @@
#!/bin/sh
# Only run on systems where logrotate is a cron job
systemctl is-active --quiet logrotate.timer && exit 0
/usr/lib/orangepi/orangepi-ramlog write >/dev/null 2>&1

View File

@@ -1,6 +1,20 @@
# add space-separated list of MOTD script names (without number) to exclude them from MOTD
# Example:
# MOTD_DISABLE="header tips updates"
# ONE_WIRE="yes" show 1-wire temperature sensor if attached
# PRIMARY_DIRECTION="rx" show daily traffic stats, options: "rx", "tx", "both", "off", vnstat needs to be installed
MOTD_DISABLE=""
ONE_WIRE="" # yes = show 1-wire temperature sensor if attached
ONE_WIRE=""
HIDE_IP_PATTERN="^dummy0|^lo"
PRIMARY_INTERFACE="$(ls -1 /sys/class/net/ | grep -v lo | egrep "enp|eth" | head -1)"
PRIMARY_DIRECTION="rx"
STORAGE=/dev/sda1
# Temperature offset in Celcius degrees
CPU_TEMP_OFFSET=0
# Define where red color is used
CPU_TEMP_LIMIT=60
HDD_TEMP_LIMIT=60
AMB_TEMP_LIMIT=40

View File

@@ -1,7 +1,7 @@
# configuration values for the orangepi-ram-logging service
#
# enable the orangepi-ram-logging service?
ENABLED=true
ENABLED=false
#
# size of the tmpfs mount -- please keep in mind to adjust /etc/default/orangepi-zram-config too when increasing
SIZE=50M
@@ -10,3 +10,15 @@ SIZE=50M
# requires rsync installed, may provide better performance
# due to copying only new and changed files
USE_RSYNC=true
# If USE_RSYNC is true, additional options may be specified for the rsync
# commands used to synchronize logs to disk from RAM (XTRA_RSYNC_TO) or from
# disk to RAM (XTRA_RSYNC_FROM). These are bash arrays to make specifying
# multiple arguments easy even in the presence of whitespace.
XTRA_RSYNC_TO=(
## If you use log rotation programs that datestamp their logs (e.g., runit's
## svlogd or daemontools' multilog), deleting log files while synchronizing is
## likely a good idea.
# --delete
)
XTRA_RSYNC_FROM=()

View File

@@ -1,7 +1,10 @@
# configuration values for the orangepi-zram-config service
#
# enable the orangepi-zram-config service?
ENABLED=true
ENABLED=false
# Zram swap enabled by default, unless set to disabled
# SWAP=false
# percentage of zram used as swap compared to physically available DRAM.
# Huge overcommitment (300) is possible and sometimes desirable. See
@@ -28,6 +31,9 @@ ENABLED=true
# Which algorithm to choose for zram based /tmp
# TMP_ALGORITHM=zstd
# Size for zram based /tmp, total memory / 2 by default
# TMP_SIZE=500M
# If defined a separate partition will be used as zram backing device. Be CAREFUL
# which partition you assign and read starting from CONFIG_ZRAM_WRITEBACK in
# https://www.kernel.org/doc/Documentation/blockdev/zram.txt

View File

@@ -0,0 +1,11 @@
#!/bin/sh
# Copy splash file to initrd
#
mkdir -p "${DESTDIR}"/lib/firmware
splashfile=/lib/firmware/bootsplash.orangepi
if [ -f "${splashfile}" ]; then
cp "${splashfile}" "${DESTDIR}"/lib/firmware
fi
exit 0

View File

@@ -7,5 +7,4 @@ tempname="/boot/uInitrd-$1"
mkimage -A $INITRD_ARCH -O linux -T ramdisk -C gzip -n uInitrd -d $2 $tempname > /dev/null
ln -sf $(basename $tempname) /boot/uInitrd > /dev/null 2>&1 || mv $tempname /boot/uInitrd
exit 0

View File

@@ -0,0 +1 @@
options 8189fs rtw_power_mgnt=0 rtw_enusbss=0

View File

@@ -1,6 +1,6 @@
#!/bin/sh
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any

View File

@@ -1,6 +1,6 @@
#!/bin/sh
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -8,8 +8,17 @@
# only do this for interactive shells
if [ "$-" != "${-#*i}" ]; then
printf "\n"
OutstandingPackages="$(egrep -v "linux-base|linux-image" /var/run/reboot-required.pkgs 2>/dev/null)"
if [ -f "/var/run/.reboot_required" ]; then
printf "[\e[0;91m Kernel was updated, please reboot\x1B[0m ]\n\n"
printf "\n[\e[0;91m Kernel was updated, please reboot\x1B[0m ]\n\n"
elif [ "X${OutstandingPackages}" != "X" ]; then
# No kernel update involved, just regular packages like e.g. dbus require a reboot
Packages="$(egrep -v "linux-base|linux-image" /var/run/reboot-required.pkgs | sort | uniq | tr '\n' ',' | sed -e 's/,/, /g' -e 's/,\ $//')"
OlderThanOneDay=$(find /var/run/reboot-required -mtime +1)
if [ "X${OlderThanOneDay}" = "X" ]; then
printf "\n[\e[0;92m some packages require a reboot (${Packages})\x1B[0m ]\n\n"
else
printf "\n[\e[0;91m some packages require a reboot since more than 1 day (${Packages})\x1B[0m ]\n\n"
fi
fi
fi

View File

@@ -1,6 +1,6 @@
#!/bin/sh
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any

View File

@@ -20,10 +20,10 @@ update_process_names=0
account_guest_in_cpu_meter=0
color_scheme=0
delay=15
left_meters=AllCPUs Memory Swap CpuTemp
left_meter_modes=1 1 1 2
right_meters=OrangePiversion Hostname Tasks LoadAverage Uptime CpuFreq Eth0 Eth0stat
right_meter_modes=2 2 2 2 2 2 2 2
left_meters=AllCPUs Memory Swap CpuFreq CpuTemp
left_meter_modes=1 1 1 2 2
right_meters=OSversion Hostname Tasks LoadAverage Uptime
right_meter_modes=2 2 2 2 2
# SBC hardware and Kernel specific path.
# Editable manually.
BoardName=

View File

@@ -0,0 +1,42 @@
# This is used to change the default configuration of Realtek USB ethernet adapters
ACTION!="add", GOTO="usb_realtek_net_end"
SUBSYSTEM!="usb", GOTO="usb_realtek_net_end"
ENV{DEVTYPE}!="usb_device", GOTO="usb_realtek_net_end"
# Modify this to change the default value
ENV{REALTEK_NIC_MODE}="1"
# Realtek
ATTR{idVendor}=="0bda", ATTR{idProduct}=="8156", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="0bda", ATTR{idProduct}=="8155", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="0bda", ATTR{idProduct}=="8153", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="0bda", ATTR{idProduct}=="8152", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
# Samsung
ATTR{idVendor}=="04e8", ATTR{idProduct}=="a101", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
# Lenovo
ATTR{idVendor}=="17ef", ATTR{idProduct}=="304f", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="3052", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="3054", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="3057", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="3082", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="7205", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="720a", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="720b", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="720c", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="721e", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="a359", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
ATTR{idVendor}=="17ef", ATTR{idProduct}=="a387", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
# TP-LINK
ATTR{idVendor}=="2357", ATTR{idProduct}=="0601", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
# Nvidia
ATTR{idVendor}=="0955", ATTR{idProduct}=="09ff", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
# LINKSYS
ATTR{idVendor}=="13b1", ATTR{idProduct}=="0041", ATTR{bConfigurationValue}!="$env{REALTEK_NIC_MODE}", ATTR{bConfigurationValue}="$env{REALTEK_NIC_MODE}"
LABEL="usb_realtek_net_end"

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -23,4 +23,4 @@ done
KERNELID=$(uname -r)
TERM=linux toilet -f standard -F metal $(echo $BOARD_NAME | sed 's/Orange Pi/OPi/')
echo -e "Welcome to \e[0;91mOrange Pi \x1B[0m$(if [[ $ID == debian ]]; then echo ${PRETTY_NAME##*\(} | sed -e 's/^.*Linux //' | sed "s/\/.*//" | sed 's|)||'; else echo -n ${VERSION_CODENAME^};fi) with \e[0;91mLinux $KERNELID\x1B[0m\n"
echo -e "Welcome to \e[0;91mOrange Pi ${VERSION} ${DISTRIBUTION_CODENAME^}\x1B[0m with $([[ $BRANCH == edge ]] && echo -e "\e[0;91mbleeding\x1B[0m edge " )\e[0;91mLinux $KERNELID\x1B[0m\n"

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -11,13 +11,19 @@
# generate system information
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
THIS_SCRIPT="sysinfo"
MOTD_DISABLE=""
STORAGE=/dev/sda1
SHOW_IP_PATTERN="^bond.*|^[ewr].*|^br.*|^lt.*|^umts.*|^lan.*"
CPU_TEMP_LIMIT=45
# don't change default values - they are lost on upgrades. Use /etc/default/orangepi-motd for your values
MOTD_DISABLE=""
PRIMARY_INTERFACE="eth0"
PRIMARY_DIRECTION="rx"
STORAGE=/dev/sda1
HIDE_IP_PATTERN="^dummy0|^lo"
CPU_TEMP_LIMIT=60
# Temperature offset in Celcius degrees
CPU_TEMP_OFFSET=0
HDD_TEMP_LIMIT=60
AMB_TEMP_LIMIT=40
[[ -f /etc/default/orangepi-motd ]] && . /etc/default/orangepi-motd
@@ -33,10 +39,10 @@ function display() {
# battery red color is opposite, lower number
if [[ "$1" == "Battery" ]]; then local great="<"; else local great=">"; fi
if [[ -n "$2" && "$2" > "0" && (( "${2%.*}" -ge "$4" )) ]]; then
printf "%-14s%s" "$1:"
printf "%-14s" "$1:"
if awk "BEGIN{exit ! ($2 $great $3)}"; then echo -ne "\e[0;91m $2"; else echo -ne "\e[0;92m $2"; fi
printf "%-1s%s\x1B[0m" "$5"
printf "%-11s%s\t" "$6"
printf "%-1s\x1B[0m" "$5"
printf "%-11s\t" "$6"
return 1
fi
} # display
@@ -54,6 +60,8 @@ function getboardtemp() {
# fallback to PMIC temperature
board_temp=$(awk '{printf("%d",$1/1000)}' </etc/orangepimonitor/datasources/pmictemp)
fi
# Some boards, such as the Orange Pi Zero LTS, report shifted CPU temperatures
board_temp=$((board_temp + CPU_TEMP_OFFSET))
} # getboardtemp
function batteryinfo() {
@@ -79,8 +87,8 @@ function batteryinfo() {
read status_battery_connected < $legacy_dir/axp20x-battery/present
if [[ "$status_battery_connected" == "1" ]]; then
status_battery_text=" "$(awk '{print tolower($0)}' < $legacy_dir/axp20x-battery/status)
read status_ac_connect < $legacy_dir/axp813-ac/present
read battery_percent< $legacy_dir/axp20x-battery/capacity
read status_ac_connect < $legacy_dir/axp813-ac/present
read battery_percent< $legacy_dir/axp20x-battery/capacity
fi
elif [[ -e "$legacy_dir/battery" ]]; then
if [[ (("$(cat $legacy_dir/battery/voltage_now)" -gt "5" )) ]]; then
@@ -98,10 +106,9 @@ function ambienttemp() {
amb_temp=$(awk '{printf("%d",$1/1000)}' <<<${raw_temp})
echo $amb_temp
elif [[ -d $W1_DIR && $ONE_WIRE == yes ]]; then
device=$(ls -1 $W1_DIR | grep -Eo '^[0-9]{1,4}' | head -1)
device=$(ls -1 $W1_DIR | grep -E '^[0-9]{1,4}' | head -1)
if [[ -n $device ]]; then
if [[ -d ${W1_DIR}${device}/hwmon/hwmon0 ]]; then hwmon=0; else hwmon=1; fi
read raw_temp < ${W1_DIR}${device}/hwmon/hwmon${hwmon}/temp1_input 2>/dev/null
read raw_temp < ${W1_DIR}${device}/hwmon/$(ls -1 ${W1_DIR}${device}/hwmon)/temp1_input 2>/dev/null
amb_temp=$(awk '{printf("%d",$1/1000)}' <<<${raw_temp})
echo $amb_temp
fi
@@ -123,20 +130,15 @@ function ambienttemp() {
fi
} # ambienttemp
#function get_ip_addresses() {
# # return up to 2 IPv4 address(es) comma separated
# hostname -I | tr " " "\n" | \
# grep -E "^((25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)\.){3}(25[0-5]|2[0-4][0-9]|[01]?[0-9][0-9]?)$" | \
# tail -n2 | sed ':a;N;$!ba;s/\n/,/g'
#} # get_ip_addresses
function get_ip_addresses() {
local ips=()
for f in /sys/class/net/*; do
local intf=$(basename $f)
# match only interface names starting with e (Ethernet), br (bridge), w (wireless), r (some Ralink drivers use ra<number> format)
if [[ $intf =~ $SHOW_IP_PATTERN ]]; then
local tmp=$(ip -4 addr show dev $intf | awk '/inet/ {print $2}' | cut -d'/' -f1)
# match only interface names "dummy0" and "lo"
if [[ $intf =~ $HIDE_IP_PATTERN ]]; then
continue
else
local tmp=$(ip -4 addr show dev $intf | grep -v "$intf:avahi" | awk '/inet/ {print $2}' | cut -d'/' -f1)
# add both name and IP - can be informative but becomes ugly with long persistent/predictable device names
#[[ -n $tmp ]] && ips+=("$intf: $tmp")
# add IP only
@@ -155,9 +157,15 @@ function storage_info() {
if [[ -n "${StorageInfo}" && ${RootInfo} != *$STORAGE* ]]; then
storage_usage=$(awk '/\// {print $(NF-1)}' <<<${StorageInfo} | sed 's/%//g')
storage_total=$(awk '/\// {print $(NF-4)}' <<<${StorageInfo})
if [[ -n "$(command -v smartctl)" ]]; then
DISK="${STORAGE::-1}"
storage_temp+=$(smartctl -l scttempsts $DISK 2> /dev/null | grep -i 'Current Temperature:' | awk '{print $(NF-1)}')
fi
fi
} # storage_info
# query various systems and send some stuff to the background for overall faster execution.
# Works only with ambienttemp and batteryinfo since A20 is slow enough :)
amb_temp=$(ambienttemp &)
@@ -165,7 +173,7 @@ ip_address=$(get_ip_addresses &)
batteryinfo
storage_info
getboardtemp
critical_load=$(( 1 + $(grep -c processor /proc/cpuinfo) / 2 ))
critical_load=80
# get uptime, logged in users and load in one take
UPTIME=$(LC_ALL=C uptime)
@@ -175,33 +183,102 @@ users=${UPT2//*','}
users=${users//' '}
time=${UPT2%','*}
time=${time//','}
time=$(echo $time | xargs)
load=${UPTIME#*'load average: '}
load=${load//','}
load=$(echo $load | cut -d" " -f1)
[[ $load == 0.0* ]] && load=0.10
cpucount=$(grep -c processor /proc/cpuinfo)
load=$(awk '{printf("%.0f",($1/$2) * 100)}' <<< "$load $cpucount")
# memory and swap
mem_info=$(LC_ALL=C free -w 2>/dev/null | grep "^Mem" || LC_ALL=C free | grep "^Mem")
memory_usage=$(awk '{printf("%.0f",(($2-($4+$6+$7))/$2) * 100)}' <<<${mem_info})
memory_total=$(awk '{printf("%d",$2/1024)}' <<<${mem_info})
mem_info=$(echo $mem_info | awk '{print $2}')
memory_total=$(( mem_info / 1024 ))
swap_info=$(LC_ALL=C free -m | grep "^Swap")
swap_usage=$( (awk '/Swap/ { printf("%3.0f", $3/$2*100) }' <<<${swap_info} 2>/dev/null || echo 0) | tr -c -d '[:digit:]')
swap_total=$(awk '{print $(2)}' <<<${swap_info})
# display info
display "System load" "${load%% *}" "${critical_load}" "0" "" "${load#* }"
printf "Up time: \x1B[92m%s\x1B[0m\t\t" "$time"
display "System load" "${load%% *}" "${critical_load}" "0" "%" ""
printf "Up time: \x1B[92m%s\x1B[0m\t" "$time"
display "Local users" "${users##* }" "3" "2" ""
echo "" # fixed newline
display "Memory usage" "$memory_usage" "70" "0" " %" " of ${memory_total}MB"
display "Zram usage" "$swap_usage" "75" "0" " %" " of $swap_total""Mb"
printf "IP: "
if [[ ${memory_total} -gt 1000 ]]; then
memory_total=$(awk '{printf("%.2f",$1/1024)}' <<<${memory_total})"G"
else
memory_total+="M"
fi
if [[ ${swap_total} -gt 500 ]]; then
swap_total=$(awk '{printf("%.2f",$1/1024)}' <<<${swap_total})"G"
else
swap_total+="M"
fi
display "Memory usage" "$memory_usage" "70" "0" "%" " of ${memory_total}"
display "Zram usage" "$swap_usage" "75" "0" "%" " of ${swap_total}"
printf "IP: "
printf "\x1B[92m%s\x1B[0m" "$ip_address"
echo "" # fixed newline
a=0;b=0;c=0
display "CPU temp" "$board_temp" $CPU_TEMP_LIMIT "0" "°C" "" ; a=$?
display "Ambient temp" "$amb_temp" $AMB_TEMP_LIMIT "0" "°C" "" ; b=$?
(( ($a+$b) >0 )) && echo "" # new line only if some value is displayed
display "CPU temp" "$board_temp" $CPU_TEMP_LIMIT "0" "°C" ""
display "Ambient temp" "$amb_temp" $AMB_TEMP_LIMIT "0" "°C" ""
display "Usage of /" "$root_usage" "90" "1" "%" " of $root_total"
display "storage/" "$storage_usage" "90" "1" "%" " of $storage_total"
display "Battery" "$battery_percent" "20" "1" "%" "$status_battery_text"
echo ""
echo "" # fixed newline
a=0
display "storage/" "$storage_usage" "90" "1" "%" " of $storage_total" ; a=$((a+$?))
display "storage temp" "$storage_temp" $HDD_TEMP_LIMIT "0" "°C" "" ; a=$((a+$?))
display "Battery" "$battery_percent" "20" "1" "%" "$status_battery_text" ; a=$((a+$?))
(( $a > 0 )) && echo "" # new line only if some value is displayed
# Check whether PRIMARY_INTERFACE exist in /var/lib/vnstat/
PRIMARY_INTERFACE=$(comm -12 <(ls -1 /var/lib/vnstat/ 2> /dev/null) <(echo "$PRIMARY_INTERFACE" | sed 's/+/\n/g') | sed -n -e 'H;${x;s/\n/+/g;s/^+//;p;}')
line=0
if [[ $(command -v vnstat) && -n $PRIMARY_INTERFACE ]]; then
traffic=$(vnstat -i $PRIMARY_INTERFACE --oneline | cut -d";" -f4,5)
traffic_rx=$(echo $traffic | cut -d";" -f1,1 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/')
traffic_tx=$(echo $traffic | cut -d";" -f2,2 | sed -r 's/([0-9]+\.[0-9]{1})[0-9]*/\1/')
[[ "$traffic" == *"Not enough"* ]] && { traffic_tx="n/a "; traffic_rx="n/a "; }
case $PRIMARY_DIRECTION in
tx)
printf "TX today: \x1B[92m%s\x1B[0m \t" "$traffic_tx"
line=$((line+1))
;;
rx)
printf "RX today: \x1B[92m%s\x1B[0m \t" "$traffic_rx"
line=$((line+1))
;;
both)
printf "TX today: \x1B[92m%s\x1B[0m \t" "$traffic_tx"
printf "RX today: \x1B[92m%s\x1B[0m \t" "$traffic_rx"
line=$((line+1))
;;
*) #off or whatever
;;
esac
fi
if [[ $(command -v zpool) ]]; then
zpoolstatus="$(zpool status </dev/stdin 2>&1 )"
if [[ -n $(echo $zpoolstatus | grep 'not loaded') ]]; then
:
elif [[ -n $(echo $zpoolstatus | grep 'degraded\|OFFLINE') ]]; then
printf "ZFS pool: "
echo -ne "\e[0;91mDegraded\x1B[0m"
line=$((line+1))
elif [[ -n $(echo $zpoolstatus | grep 'no pools available') ]]; then
printf "ZFS pool: "
echo -ne "n/a"
line=$((line+1))
else
printf "ZFS pool: "
echo -ne "\e[0;92mOnline\x1B[0m"
line=$((line+1))
fi
fi
[[ $line -ne 0 ]] && echo ""
echo ""

View File

@@ -0,0 +1,26 @@
#!/bin/bash
#
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
# warranty of any kind, whether express or implied.
# DO NOT EDIT THIS FILE but add config options to /etc/default/orangepi-motd
# any changes will be lost on board support package update
THIS_SCRIPT="tips"
MOTD_DISABLE=""
[[ -f /etc/default/orangepi-motd ]] && . /etc/default/orangepi-motd
for f in $MOTD_DISABLE; do
[[ $f == $THIS_SCRIPT ]] && exit 0
done
quotes="/etc/update-motd.d/quotes.txt"
if [[ -f $quotes ]]; then
random_line=$(shuf -i 1-$(wc -l < $quotes) -n 1)
quote=$(sed -n -e "$random_line"p $quotes)
[[ -n $quote ]] && echo -e "\e[93mTip of the day:\e[39m $quote\n"
fi

View File

@@ -0,0 +1,29 @@
#!/bin/bash
#
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
# warranty of any kind, whether express or implied.
# DO NOT EDIT THIS FILE but add config options to /etc/default/orangepi-motd
# any changes will be lost on board support package update
THIS_SCRIPT="updates"
MOTD_DISABLE=""
[[ -f /etc/default/orangepi-motd ]] && . /etc/default/orangepi-motd
for f in $MOTD_DISABLE; do
[[ $f == $THIS_SCRIPT ]] && exit 0
done
NUM_UPDATES=0
[[ -f /var/cache/apt/archives/updates.number ]] && . /var/cache/apt/archives/updates.number
if [[ $NUM_UPDATES -gt 0 ]]; then
echo -e "[\e[31m $NUM_SECURITY_UPDATES security updates available, $NUM_UPDATES updates total\e[0m: \e[1mapt upgrade\e[0m ]"
echo -e "Last check: \e[92m$DATE\e[0m"
echo
fi

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any

View File

@@ -0,0 +1,8 @@
[Unit]
Description=Disable automated desktop login
[Service]
Type=simple
ExecStart=rm -f /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
TimeoutStopSec= 10
ExecStop=systemctl disable orangepi-disable-autologin.timer

View File

@@ -0,0 +1,8 @@
[Unit]
Description=Disable automated desktop login
[Timer]
OnActiveSec=2min
[Install]
WantedBy=timers.target

View File

@@ -9,7 +9,7 @@ ConditionPathExists=/boot/orangepi_first_run.txt
ConditionPathExists=/root/.not_logged_in_yet
[Service]
Type=oneshot
Type=idle
RemainAfterExit=yes
ExecStart=/usr/lib/orangepi/orangepi-firstrun-config
TimeoutStartSec=2min

View File

@@ -1071,26 +1071,26 @@ NetworkMonitorMode() {
# Allow orangepimonitor to return back to orangepi-config
trap "echo ; exit 0" 0 1 2 3 15
timerStart
kickAllStatsDown
# Count interfaces - multiple routes causing interfaces to show up more than once, filtering...
ifacecount=$(route -n | egrep UG | egrep -o "[a-zA-Z0-9]*$" | sort | uniq)
ifacecount=$(route -n | egrep UG | egrep -o '[^ ]*$' | sort | uniq)
# If there are two ore more interfaces detected open a dynamic dialog box to select which to monitor
if [ "$(echo -e $ifacecount | tr ' ' '\n' | wc -l)" -gt 1 ]; then
ifacemenu=$(route -n | egrep UG | egrep -o "[a-zA-Z0-9]*$" | sort | uniq | awk '{a[$1]=$1}END{for(i in a)printf i" "a[i]" "}')
ifacemenu=$(route -n | egrep UG | egrep -o '[^ ]*$' | sort | uniq | awk '{a[$1]=$1}END{for(i in a)printf i" "a[i]" "}')
ifacefunc() {
dialog --backtitle "Interface selector" \
--title "Multiple network interfaces detected" \
--menu "Choose which interface to monitor:" \
15 50 $(route -n | egrep UG | egrep -o "[a-zA-Z0-9]*$" | sort | uniq | wc -l) \
15 50 $(route -n | egrep UG | egrep -o '[^ ]*$' | sort | uniq | wc -l) \
$(echo $ifacemenu) 2>&1 >$(tty)
}
iface=$(ifacefunc)
else
# Use default behavior if one interface is found only
iface=$(route -n | egrep UG | egrep -o "[a-zA-Z0-9]*$")
iface=$(route -n | egrep UG | egrep -o '[^ ]*$')
fi
timerStart
kickAllStatsDown
printf "\nruntime network statistics: $(uname -n)\n"
printf "network interface: $(echo $iface)\n"

View File

@@ -28,7 +28,10 @@ else
fi
# give up if packages are broken
[[ ! $(dpkg -l | grep ^..r) ]] && exit 0
[[ $(dpkg -l | grep ^..r) ]] && exit 0
# give up if there is a dependency problem
[[ "$((apt-get upgrade -s -qq) 2>&1)" == *"Unmet dependencies"* ]] && exit 0
myfile="/var/cache/apt/archives/updates.number"

View File

@@ -0,0 +1,164 @@
#!/bin/sh
mixer() {
parm=${4:-on}
amixer -c "$1" sset "$2" "$3" $parm >/dev/null 2>&1
amixer -c "$1" sset "$2" $parm >/dev/null 2>&1
}
if [ -f $HOME/.config/sound.conf ]; then
alsactl restore -f $HOME/.config/sound.conf
else
# get card num
#card=`echo $1 | sed 's/[^0-9]*//g'`
card1=`aplay -l | grep "device 0" | awk '{print $3}'`
#echo $card
for card in $card1
do
#echo $card
# set common mixer params
mixer $card Master 0db
mixer $card Front 100%
mixer $card PCM 0db
mixer $card Synth 100%
# mute CD, since using digital audio instead
mixer $card CD 0% mute
# Only unmute Line and Aux if they are possibly used.
# mixer $card Line 100%
# mixer $card Aux 100%
# mute mic
mixer $card Mic 0% mute
# ESS 1969 chipset has 2 PCM channels
mixer $card PCM,1 100%
# Trident/YMFPCI/emu10k1
mixer $card Wave 100%
mixer $card Music 100%
mixer $card AC97 100%
mixer $card Surround 90%
mixer $card 'Surround Digital' 90%
mixer $card 'Wave Surround' 90%
mixer $card 'Duplicate Front' 90%
mixer $card 'Sigmatel 4-Speaker Stereo' 90%
# CS4237B chipset:
mixer $card 'Master Digital' 100%
# DRC
mixer $card 'Dynamic Range Compression' 90%
# Envy24 chips with analog outs
mixer $card DAC 100%
mixer $card DAC,0 100%
mixer $card DAC,1 100%
# some notebooks use headphone instead of master
mixer $card Headphone 100%
mixer $card Speaker 100%
mixer $card 'Internal Speaker' 0% mute
mixer $card Playback 100%
mixer $card Headphone 100%
mixer $card Speaker 100%
mixer $card Center 100%
mixer $card LFE 100%
mixer $card Center/LFE 100%
# Intel P4P800-MX (Ubuntu bug #5813)
mixer $card 'Master Playback Switch' on
# set digital output mixer params
mixer $card 'IEC958' 100% on
mixer $card 'IEC958 Output' 100%
mixer $card 'IEC958 Coaxial' 100%
mixer $card 'IEC958 LiveDrive' 100%
mixer $card 'IEC958 Optical Raw' 100%
mixer $card 'SPDIF Out' 100%
mixer $card 'SPDIF Front' 100%
mixer $card 'SPDIF Rear' 100%
mixer $card 'SPDIF Center/LFE' 100%
mixer $card 'Master Digital' 100%
mixer $card 'Analog Front' 100%
mixer $card 'Analog Rear' 100%
mixer $card 'Analog Center/LFE' 100%
# ASRock ION 330 (and perhaps others) has 2 IEC958 channels
mixer $card IEC958,0 on
mixer $card IEC958,1 on
# some ION2 has much more IEC958 channels ...
mixer $card IEC958,2 on
mixer $card IEC958,3 on
# ASRock ION 330 has Master Front set to 0
mixer $card 'Master Front' 100%
# Shuttle XS35GT needs this too
mixer $card 'Master',0 100% on
# and this for various Fusion devices like Zotac ZBOX
mixer $card 'Front',0 100% on
# NVidia CK804 sound devices
mixer $card 'IEC958 Playback AC97-SPSA' 100%
# Allwinner H3 Analog
mixer $card 'Line Out' 0db on
# Allwinner A20 Analog
mixer $card 'Power Amplifier' 0db
mixer $card 'Power Amplifier DAC' on
mixer $card 'Power Amplifier Mute' on
# Allwinner A64 Analog
mixer $card Headphone 0db on
mixer $card 'AIF1 Slot 0 Digital DAC' on
# Amlogic G12 HDMI to PCM0
mixer $card 'FRDDR_A SINK 1 SEL' 'OUT 1'
mixer $card 'FRDDR_A SRC 1 EN' on
mixer $card 'TDMOUT_B SRC SEL' 'IN 0'
mixer $card 'TOHDMITX I2S SRC' 'I2S B'
mixer $card 'TOHDMITX' on
# Amlogic G12 S/PDIF to PCM1
mixer $card 'FRDDR_B SINK 1 SEL' 'OUT 3'
mixer $card 'FRDDR_B SRC 1 EN' on
mixer $card 'SPDIFOUT SRC SEL' 'IN 1'
mixer $card 'SPDIFOUT Playback' on
# Amlogic GX HDMI and S/PDIF
mixer $card 'AIU HDMI CTRL SRC' 'I2S'
mixer $card 'AIU SPDIF SRC SEL' 'SPDIF'
# RockPI 4B Analog
mixer $card 'Right Headphone Mixer Right DAC' on
mixer $card 'Left Headphone Mixer Left DAC' on
# NanoPC T4 Analog
mixer $card 'HPO L' on
mixer $card 'HPO R' on
mixer $card 'HPOVOL L' on
mixer $card 'HPOVOL R' on
mixer $card 'HPO MIX HPVOL' on
mixer $card 'OUT MIXL DAC L1' on
mixer $card 'OUT MIXR DAC R1' on
mixer $card 'Stereo DAC MIXL DAC L1' on
mixer $card 'Stereo DAC MIXR DAC R1' on
done
fi

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -34,19 +34,27 @@ MACADDR=$(printf ${prefixes[$random]}':%02X:%02X:%02X:%02X:%02X\n' $[RANDOM%256]
# set fixed IP address from first randomly assigned one. If nothing is deteceted, generate one.
set_fixed_mac ()
{
if [ -n "$(command -v nmcli)" ]; then
CONNECTION="$(nmcli -f UUID,ACTIVE,DEVICE,TYPE connection show --active | tail -n1)"
UUID=$(awk -F" " '/ethernet/ {print $1}' <<< "${CONNECTION}")
DEVNAME=$(awk -F" " '/ethernet/ {print $3}' <<< "${CONNECTION}")
else
DEVNAME=eth0
fi
CONNECTION="$(nmcli -f UUID,ACTIVE,DEVICE,TYPE connection show --active | tail -n1)"
UUID=$(awk -F" " '/ethernet/ {print $1}' <<< "${CONNECTION}")
DEVNAME=$(awk -F" " '/ethernet/ {print $3}' <<< "${CONNECTION}")
MACADDR=$(/sbin/ip link | grep -A1 ${DEVNAME} | awk -F" " '/ether / {print $2}')
MACADDR=$(/sbin/ip link | grep -A1 ${DEVNAME} | awk -F" " '/ether / {print $2}')
[[ -z $MACADDR ]] && get_random_mac
[[ -z $MACADDR ]] && get_random_mac
if [[ -n $UUID ]]; then
nmcli connection modify $UUID ethernet.cloned-mac-address $MACADDR
nmcli connection modify $UUID -ethernet.mac-address ""
nmcli connection down $UUID >/dev/null 2>&1
nmcli connection up $UUID >/dev/null 2>&1
if [[ -n "$(command -v nmcli)" && -n $UUID ]]; then
nmcli connection modify $UUID ethernet.cloned-mac-address $MACADDR
nmcli connection modify $UUID -ethernet.mac-address ""
nmcli connection down $UUID >/dev/null 2>&1
nmcli connection up $UUID >/dev/null 2>&1
elif [[ -f /etc/systemd/network/$DEVNAME.network ]]; then
if ! grep '^ *MACAddress=' /etc/systemd/network/$DEVNAME.network > /dev/null; then
sed -i "s/#MACAddress=/MACAddress=$MACADDR/g" /etc/systemd/network/$DEVNAME.network
fi
fi
return 0
fi
} # set fixed mac to the 1st active network adapter

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -8,100 +8,200 @@
. /etc/orangepi-release
check_abort()
{
echo -e "\nDisabling user account creation procedure\n"
rm -f /root/.not_logged_in_yet
if [[ ${USER_SHELL} == zsh ]]; then
printf "\nYou selected \e[0;91mZSH\x1B[0m as your default shell. If you want to use it right away, please logout and login! \n\n"
fi
trap - INT
exit 0
}
function read_password()
read_password()
{
unset password
prompt="$1 password: "
while IFS= read -p "$prompt" -r -s -n 1 char
do
if [[ $char == $'\0' ]]
then
break
fi
prompt='*'
password+="$char"
done
unset password
unset charcount
prompt="$1 password: "
stty -echo
charcount=0
while IFS= read -p "$prompt" -r -s -n 1 char
do
if [[ $char == $'\0' ]]
then
break
fi
# Handle backspace
if [[ $char == $'\177' ]]
then
if [ $charcount -gt 0 ]
then
charcount=$((charcount-1))
prompt=$'\b \b'
password="${password%?}"
else
prompt=''
fi
else
charcount=$((charcount+1))
prompt='*'
password+="$char"
fi
done
stty echo
}
set_shell()
{
optionsAudits=($(cat /etc/shells | grep "zsh\|/bash" | sed 's/\/bin\///g' | sed 's/\/usr//g' | uniq))
USER_SHELL="bash"
if [[ "${#optionsAudits[@]}" -gt 1 ]]; then
while :
do
i=1
echo -e "\nChoose default system command shell:\n"
for o in "${optionsAudits[@]}"; do
echo "$i) $o"
let i++
done
read -n1 -s reply
case $reply in
"1"|"${optionsAudits[0]}") USER_SHELL="${optionsAudits[0]}"; break;;
"2"|"${optionsAudits[1]}") USER_SHELL="${optionsAudits[1]}"; break;;
*) USER_SHELL="${optionsAudits[0]}"; break;;
esac
done
fi
SHELL_PATH=$(grep /$USER_SHELL$ /etc/shells | tail -1)
chsh -s $(grep -iF "/$USER_SHELL" /etc/shells | tail -1)
echo -e "\nShell: \x1B[92m${USER_SHELL^^}\x1B[0m"
# change shell for future users
sed -i "s|^SHELL=.*|SHELL=${SHELL_PATH}|" /etc/default/useradd
sed -i "s|^DSHELL=.*|DSHELL=${SHELL_PATH}|" /etc/adduser.conf
}
set_timezone_and_locales()
{
# Grab this machine's public IP address
PUBLIC_IP=`curl --max-time 5 -s https://ipinfo.io/ip`
if [ $? -eq 0 ]; then
# Call the geolocation API and capture the output
RES=$(
curl --max-time 5 -s http://ipwhois.app/json/${PUBLIC_IP} | \
jq '.timezone, .country, .country_code' | \
while read -r TIMEZONE; do
read -r COUNTRY
echo "${TIMEZONE},${COUNTRY},${COUNTRYCODE}" | tr --delete \"
done
)
# Check if we have wireless adaptor
WIFI_DEVICE=$(LC_ALL=C nmcli dev status | grep " wifi " 2>/dev/null)
TZDATA=$(echo ${RES} | cut -d"," -f1)
STATE=$(echo ${RES} | cut -d"," -f2)
LOCALES=$(grep territory /usr/share/i18n/locales/* | grep "$STATE" | cut -d ":" -f 1 | cut -d "/" -f 6 | xargs -I{} grep {} /usr/share/i18n/SUPPORTED | grep "\.UTF-8" | cut -d " " -f 1)
CCODE=$(echo ${RES} | cut -d"," -f3 | awk '{print tolower($0)}' | xargs)
options=(`echo ${LOCALES}`);
if [ -z "$PUBLIC_IP" ]; then
# ask for connecting to wireless if wifi device is found
if [[ -n "$WIFI_DEVICE" ]]; then
echo -e "Internet connection was \x1B[91mnot detected\x1B[0m."
echo ""
read -n1 -s -r -p "Connect via wireless? [Y/n] " response
echo ""
if [[ "${response}" =~ ^(Y|y|"")$ ]]; then
nmtui-connect
fi
echo ""
fi
fi
# Grab IP once again if not found
[[ -z "$PUBLIC_IP" && -n "$WIFI_DEVICE" ]] && PUBLIC_IP=`curl --max-time 5 -s https://ipinfo.io/ip`
# Call the geolocation API and capture the output
RES=$(
curl --max-time 5 -s http://ipwhois.app/json/${PUBLIC_IP} | \
jq '.timezone, .country, .country_code' | \
while read -r TIMEZONE; do
read -r COUNTRY
echo "${TIMEZONE},${COUNTRY},${COUNTRYCODE}" | tr --delete \"
done
)
TZDATA=$(echo ${RES} | cut -d"," -f1)
STATE=$(echo ${RES} | cut -d"," -f2)
CCODE=$(echo ${RES} | cut -d"," -f3 | xargs)
echo -e "Detected timezone: \x1B[92m$TZDATA\x1B[0m"
echo ""
unset response
while [[ ! "${response}" =~ ^(Y|y|N|n)$ ]]; do
read -n1 -s -r -p "Set user language based on your location? [Y/n] " response
echo ""
done
# change it only if we have a match and if we agree
if [[ "${response}" =~ ^(N|n)$ ]]; then
unset CCODE TZDATA
fi
LOCALES=$(grep territory /usr/share/i18n/locales/* | grep _"$CCODE" | cut -d ":" -f 1 | cut -d "/" -f 6 | \
xargs -I{} grep {} /usr/share/i18n/SUPPORTED | grep "\.UTF-8" | cut -d " " -f 1)
# UTF8 is not present everywhere so check again in case it returns empty value
[[ -z "$LOCALES" ]] && LOCALES=$(grep territory /usr/share/i18n/locales/* | grep _"$CCODE" | cut -d ":" -f 1 | cut -d "/" -f 6 | \
xargs -I{} grep {} /usr/share/i18n/SUPPORTED | cut -d " " -f 1)
options=(`echo ${LOCALES}`);
# when having more locales, prompt for choosing one
if [[ "${#options[@]}" -gt 1 ]]; then
options+=("Skip generating locales")
echo -e "\nAt your location, more locales are possible:\n"
PS3='Please enter your choice:'
select opt in "${options[@]}"
do
if [[ " ${options[@]} " =~ " ${opt} " ]]; then
LOCALES=${opt}
break
fi
done
fi
if [[ "${LOCALES}" != *Skip* ]]; then
# if TZDATA was not detected, we need to select one
if [[ -z ${TZDATA} ]]; then
TZDATA=$(tzselect | tail -1)
fi
# reconfigure tzdata
timedatectl set-timezone "${TZDATA}"
dpkg-reconfigure --frontend=noninteractive tzdata > /dev/null 2>&1
echo -e "Detected timezone: \x1B[92m$(LC_ALL=C timedatectl | grep "Time zone" | cut -d":" -f2 | xargs)\x1B[0m"
echo -e "Do you want to set locales and console keyboard automatically from your location [Y/n]"
read -sn1 SetLocales
if [ "$SetLocales" != "n" ] && [ "$SetLocales" != "N" ]; then
# generate locales
echo ""
sed -i 's/# '"${LOCALES}"'/'"${LOCALES}"'/' /etc/locale.gen
echo -e "Generating locales: \x1B[92m${LOCALES}\x1B[0m"
locale-gen "${LOCALES}" > /dev/null 2>&1
# when having more locales, prompt for choosing one
if [[ "${#options[@]}" -gt 1 ]]; then
echo -e "\nAt your location, more locales are possible:\n"
PS3='Please enter your choice:'
select opt in "${options[@]}"
do
if [[ " ${options[@]} " =~ " ${opt} " ]]; then
LOCALES=${opt}
break
fi
done
fi
# generate locales
sed -i 's/# '"${LOCALES}"'/'"${LOCALES}"'/' /etc/locale.gen
echo -e "Generating locales: \x1B[92m${LOCALES}\x1B[0m"
locale-gen $LOCALES > /dev/null 2>&1
update-locale LANG=$LOCALES LANGUAGE=$LOCALES LC=$LOCALES LC_MESSAGES=$LOCALES
# setting up keyboard
echo -e "Console keyboard layout: \x1B[92m$CCODE\x1B[0m"
sed -i "s/XKBLAYOUT=.*/XKBLAYOUT=\"$CCODE\"/" /etc/default/keyboard
setupcon -k --force
else
echo -e "You can use \x1B[92morangepi-config\x1B[0m to set locales and console keyboard."
fi
# setting detected locales only for user
echo "export LC_ALL=$LOCALES" >> /home/"$RealUserName"/.bashrc
echo "export LANG=$LOCALES" >> /home/"$RealUserName"/.bashrc
echo "export LANGUAGE=$LOCALES" >> /home/"$RealUserName"/.bashrc
echo "export LC_ALL=$LOCALES" >> /home/"$RealUserName"/.xsessionrc
echo "export LANG=$LOCALES" >> /home/"$RealUserName"/.xsessionrc
echo "export LANGUAGE=$LOCALES" >> /home/"$RealUserName"/.xsessionrc
fi
}
add_profile_sync_settings()
{
/usr/bin/psd >/dev/null 2>&1
@@ -126,72 +226,105 @@ add_profile_sync_settings()
add_user()
{
read -t 0 temp
REPEATS=3
while [ -f "/root/.not_logged_in_yet" ]; do
echo -e "\nPlease provide a username (eg. your forename): \c"
echo -e "\nPlease provide a username (eg. your first name): \c"
read -e username
if ! grep '^[a-zA-Z]*$' <<< $username > /dev/null ; then
echo -e "\n\x1B[91mError\x1B[0m: illegal characters in username"
return
fi
RealUserName="$(echo "$username" | tr '[:upper:]' '[:lower:]' | tr -d -c '[:alnum:]')"
[ -z "$RealUserName" ] && return
if ! id "$RealUserName" >/dev/null 2>&1; then break; else echo -e "Username \e[0;31m$RealUserName\x1B[0m already exists on the system."; fi
done
while [ -f "/root/.not_logged_in_yet" ]; do
read_password "Create"
first_input=$password
read_password "Create user ($username)"
first_input="$password"
echo ""
read_password "Repeat"
second_input=$password
read_password "Repeat user ($username)"
second_input="$password"
echo ""
if [[ $first_input == $second_input ]]; then
result="$(cracklib-check <<<"$password")"
okay="$(awk -F': ' '{ print $2}' <<<"$result")"
if [[ "$okay" == "OK" ]]; then
echo -e "\nPlease provide your real name (eg. John Doe): \c"
read -e RealName
adduser --quiet --disabled-password --shell /bin/bash --home /home/"$RealUserName" --gecos "$RealName" "$RealUserName"
(echo $first_input;echo $second_input;) | passwd "$RealUserName" >/dev/null 2>&1
if [[ "$first_input" == "$second_input" ]]; then
result="$(cracklib-check <<<"$password")"
okay="$(awk -F': ' '{ print $2}' <<<"$result")"
if [[ "$okay" == "OK" ]]; then
echo -e ""
read -e -p "Please provide your real name: " -i "${RealUserName^}" RealName
adduser --quiet --disabled-password --home /home/"$RealUserName" --gecos "$RealName" "$RealUserName"
(echo "$first_input";echo "$second_input";) | passwd "$RealUserName" >/dev/null 2>&1
for additionalgroup in sudo netdev audio video disk tty users games dialout plugdev input bluetooth systemd-journal ssh; do
usermod -aG ${additionalgroup} ${RealUserName} 2>/dev/null
usermod -aG "${additionalgroup}" "${RealUserName}" 2>/dev/null
done
# fix for gksu in Xenial
touch /home/$RealUserName/.Xauthority
chown $RealUserName:$RealUserName /home/$RealUserName/.Xauthority
touch /home/"$RealUserName"/.Xauthority
chown "$RealUserName":"$RealUserName" /home/"$RealUserName"/.Xauthority
RealName="$(awk -F":" "/^${RealUserName}:/ {print \$5}" </etc/passwd | cut -d',' -f1)"
[ -z "$RealName" ] && RealName=$RealUserName
[ -z "$RealName" ] && RealName="$RealUserName"
echo -e "\nDear \e[0;92m${RealName}\x1B[0m, your account \e[0;92m${RealUserName}\x1B[0m has been created and is sudo enabled."
echo -e "Please use this account for your daily work from now on.\n"
rm -f /root/.not_logged_in_yet
chmod +x /etc/update-motd.d/*
# set up profile sync daemon on desktop systems
which psd >/dev/null 2>&1
command -v psd >/dev/null 2>&1
if [ $? -eq 0 ]; then
echo -e "${RealUserName} ALL=(ALL) NOPASSWD: /usr/bin/psd-overlay-helper" >> /etc/sudoers
touch /home/${RealUserName}/.activate_psd
chown $RealUserName:$RealUserName /home/${RealUserName}/.activate_psd
touch /home/"${RealUserName}"/.activate_psd
chown "$RealUserName":"$RealUserName" /home/"${RealUserName}"/.activate_psd
fi
break
break
else
echo -e "Rejected - \e[0;31m$okay.\x1B[0m Try again."
fi
elif [[ -n $password ]]; then
echo -e "Rejected - \e[0;31mpasswords do not match.\x1B[0m Try again."
fi
done
echo -e "Rejected - \e[0;31m$okay.\x1B[0m Try again [${REPEATS}]."
REPEATS=$((REPEATS - 1))
fi
elif [[ -n $password ]]; then
echo -e "Rejected - \e[0;31mpasswords do not match.\x1B[0m Try again [${REPEATS}]."
REPEATS=$((REPEATS - 1))
fi
[[ "$REPEATS" -eq 0 ]] && exit
done
}
if [[ -f /root/.not_logged_in_yet && -n $(tty) ]]; then
# disable autologin
#rm -f /etc/systemd/system/getty@.service.d/override.conf
#rm -f /etc/systemd/system/serial-getty@.service.d/override.conf
#systemctl daemon-reload
# detect lightdm
# detect display manager
#desktop_lightdm=$(dpkg-query -W -f='${db:Status-Abbrev}\n' lightdm 2>/dev/null)
#desktop_gdm3=$(dpkg-query -W -f='${db:Status-Abbrev}\n' gdm3 2>/dev/null)
#echo -e "\nWaiting for system to finish booting ...\n"
#systemctl is-system-running --wait >/dev/null
#if [ "$IMAGE_TYPE" != "nightly" ]; then
# if [ "$BRANCH" == "dev" ]; then
# echo -e "\nYou are using an Orange Pi preview build !!!"
# echo -e "\nThis image is provided \e[0;31mAS IS\x1B[0m with \e[0;31mNO WARRANTY\x1B[0m and \e[0;31mNO END USER SUPPORT!\x1B[0m.\n"
# elif [ "$DISTRIBUTION_STATUS" != "supported" ]; then
# echo -e "\nYou are using an Orange Pi with unsupported ($DISTRIBUTION_CODENAME) userspace !!!"
# echo -e "\nThis image is provided \e[0;31mAS IS\x1B[0m with \e[0;31mNO WARRANTY\x1B[0m and \e[0;31mNO END USER SUPPORT!\x1B[0m.\n"
# fi
#else
# echo -e "\nYou are using an Orange Pi nightly build meant only for developers to provide"
# echo -e "constructive feedback to improve build system, OS settings or user experience."
# echo -e "If this does not apply to you, \e[0;31mSTOP NOW!\x1B[0m. Especially don't use this image for"
# echo -e "daily work since things might not work as expected or at all and may break"
# echo -e "anytime with next update. \e[0;31mYOU HAVE BEEN WARNED!\x1B[0m"
# echo -e "\nThis image is provided \e[0;31mAS IS\x1B[0m with \e[0;31mNO WARRANTY\x1B[0m and \e[0;31mNO END USER SUPPORT!\x1B[0m.\n"
#fi
echo -e "New to Orange Pi? Support: \e[1m\e[39mhttp://www.orangepi.org\x1B[0m\n"
@@ -214,7 +347,6 @@ if [[ -f /root/.not_logged_in_yet && -n $(tty) ]]; then
# okay="$(awk -F': ' '{ print $2}' <<<"$result")"
# if [[ "$okay" == "OK" ]]; then
# (echo $first_input;echo $second_input;) | passwd root >/dev/null 2>&1
# set_timezone_and_locales
# break
# else
# echo -e "Rejected - \e[0;31m$okay.\x1B[0m Try again."
@@ -225,50 +357,124 @@ if [[ -f /root/.not_logged_in_yet && -n $(tty) ]]; then
#done
#trap - INT TERM EXIT
# ask user to select shell
#trap '' 2
#set_shell
#trap - INT TERM EXIT
#trap check_abort INT
#while [ -f "/root/.not_logged_in_yet" ]; do
# echo -e "\nCreating a new user account. Press <Ctrl-C> to abort"
# [ -n "$desktop_lightdm" ] && echo "Desktop environment will not be enabled if you abort the new user creation"
# [ -n "$desktop_lightdm" ] && echo -e "\n\e[0;31mDesktop environment will not be enabled if you abort the new user creation\x1B[0m"
# add_user
#done
#trap - INT TERM EXIT
rm -f /root/.not_logged_in_yet
## ask user to select automated locales or not
#trap '' 2
#set_timezone_and_locales
#trap - INT TERM EXIT
#if [[ ${USER_SHELL} == zsh ]]; then
# printf "\nYou selected \e[0;91mZSH\x1B[0m as your default shell. If you want to use it right away, please logout and login! \n\n"
#fi
# check whether desktop environment has to be considered
#if [ -n "$desktop_lightdm" ]; then
#if [ -n "$desktop_lightdm" ] && [ -n "$RealName" ] ; then
# # 1st run goes without login
# mkdir -p /etc/lightdm/lightdm.conf.d
# cat <<-EOF > /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
# [Seat:*]
# autologin-user=$RealUserName
# autologin-user-timeout=0
# user-session=xfce
# EOF
#
# ln -sf /lib/systemd/system/lightdm.service /etc/systemd/system/display-manager.service
# if [[ -f /var/run/resize2fs-reboot ]]; then
# # Let the user reboot now otherwise start desktop environment
# printf "\n\n\e[0;91mWarning: a reboot is needed to finish resizing the filesystem \x1B[0m \n"
# printf "\e[0;91mPlease reboot the system now \x1B[0m \n\n"
# elif [ -z "$ConfigureDisplay" ] || [ "$ConfigureDisplay" = "n" ] || [ "$ConfigureDisplay" = "N" ]; then
# echo -e "\n\e[1m\e[39mNow starting desktop environment...\x1B[0m\n"
# sleep 1
# service lightdm start 2>/dev/null
# if [ -f /root/.desktop_autologin ]; then
# rm /root/.desktop_autologin
# else
# (sleep 20; rm /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf) &
# # 1st run goes without login
# mkdir -p /etc/lightdm/lightdm.conf.d
# cat <<-EOF > /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
# [Seat:*]
# autologin-user=$RealUserName
# autologin-user-timeout=0
# user-session=xfce
# EOF
# # select gnome session (has to be first or it breaks budgie/cinnamon desktop autologin and user-session)
# [[ -x $(which gnome-session) ]] && sed -i "s/user-session.*/user-session=ubuntu/" /etc/lightdm/lightdm.conf.d/11-orangepi.conf
# [[ -x $(which gnome-session) ]] && sed -i "s/user-session.*/user-session=ubuntu/" /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
# # select budgie session
# [[ -x $(which budgie-desktop) ]] && sed -i "s/user-session.*/user-session=budgie-desktop/" /etc/lightdm/lightdm.conf.d/11-orangepi.conf
# [[ -x $(which budgie-desktop) ]] && sed -i "s/user-session.*/user-session=budgie-desktop/" /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
# # select deepin session
# [[ -x $(which deepin-wm) ]] && sed -i "s/user-session.*/user-session=deepin/" /etc/lightdm/lightdm.conf.d/11-orangepi.conf
# [[ -x $(which deepin-wm) ]] && sed -i "s/user-session.*/user-session=deepin/" /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
# # select cinnamon session
# [[ -x $(which cinnamon) ]] && sed -i "s/user-session.*/user-session=cinnamon/" /etc/lightdm/lightdm.conf.d/11-orangepi.conf
# [[ -x $(which cinnamon) ]] && sed -i "s/user-session.*/user-session=cinnamon/" /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
# # select mate session
# [[ -x $(which mate-wm) ]] && sed -i "s/user-session.*/user-session=mate/" /etc/lightdm/lightdm.conf.d/11-orangepi.conf
# [[ -x $(which mate-wm) ]] && sed -i "s/user-session.*/user-session=mate/" /etc/lightdm/lightdm.conf.d/22-orangepi-autologin.conf
# ln -sf /lib/systemd/system/lightdm.service /etc/systemd/system/display-manager.service
# if [[ -f /var/run/resize2fs-reboot ]]; then
# # Let the user reboot now otherwise start desktop environment
# printf "\n\n\e[0;91mWarning: a reboot is needed to finish resizing the filesystem \x1B[0m \n"
# printf "\e[0;91mPlease reboot the system now \x1B[0m \n\n"
# elif [ -z "$ConfigureDisplay" ] || [ "$ConfigureDisplay" = "n" ] || [ "$ConfigureDisplay" = "N" ]; then
# echo -e "\n\e[1m\e[39mNow starting desktop environment...\x1B[0m\n"
# sleep 1
# service lightdm start 2>/dev/null
# if [ -f /root/.desktop_autologin ]; then
# rm /root/.desktop_autologin
# else
# systemctl -q enable orangepi-disable-autologin.timer
# systemctl start orangepi-disable-autologin.timer
# fi
# # logout if logged at console
# [[ -n $(who -la | grep root | grep tty1) ]] && exit 1
# fi
# # logout if logged at console
# #[[ -n $(who -la | grep root | grep tty1) ]] && exit 1
# fi
#elif [ -n "$desktop_gdm3" ] && [ -n "$RealName" ] ; then
# # 1st run goes without login
# mkdir -p /etc/gdm3
# cat <<-EOF > /etc/gdm3/custom.conf
# [daemon]
# AutomaticLoginEnable = true
# AutomaticLogin = $RealUserName
# EOF
# ln -sf /lib/systemd/system/gdm3.service /etc/systemd/system/display-manager.service
# if [[ -f /var/run/resize2fs-reboot ]]; then
# # Let the user reboot now otherwise start desktop environment
# printf "\n\n\e[0;91mWarning: a reboot is needed to finish resizing the filesystem \x1B[0m \n"
# printf "\e[0;91mPlease reboot the system now \x1B[0m \n\n"
# elif [ -z "$ConfigureDisplay" ] || [ "$ConfigureDisplay" = "n" ] || [ "$ConfigureDisplay" = "N" ]; then
# echo -e "\n\e[1m\e[39mNow starting desktop environment...\x1B[0m\n"
# sleep 1
# service gdm3 start 2>/dev/null
# if [ -f /root/.desktop_autologin ]; then
# rm /root/.desktop_autologin
# else
# (sleep 20; sed -i "s/AutomaticLoginEnable.*/AutomaticLoginEnable = false/" /etc/gdm3/custom.conf) &
# fi
# # logout if logged at console
# [[ -n $(who -la | grep root | grep tty1) ]] && exit 1
# fi
#else
# # Display reboot recommendation if necessary
# if [[ -f /var/run/resize2fs-reboot ]]; then
# printf "\n\n\e[0;91mWarning: a reboot is needed to finish resizing the filesystem \x1B[0m \n"
# printf "\e[0;91mPlease reboot the system now \x1B[0m \n\n"
# fi
#fi
rm -f /root/.not_logged_in_yet
fi

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -19,17 +19,11 @@ case "$1" in
cpu_cores=$(grep -c '^processor' /proc/cpuinfo | sed 's/^0$/1/')
# adjust custom htop initial configuration based on CPU count https://github.com/avafinger/htop-2.1.1_enhanced-version
right_meters="Hostname Tasks LoadAverage Uptime"
right_meter_modes="2 2 2 2"
x=1
until [ $x -gt $cpu_cores ]; do
right_meters=$right_meters" CpuFreq($x)"
right_meter_modes=$right_meter_modes" 2"
let x+=1
done
right_meters="Hostname Tasks LoadAverage DiskIO NetworkIO Uptime Systemd CpuFreq"
right_meter_modes="2 2 2 2 2 2 2 2"
sed -i 's/header_margin=.*/header_margin=1/g' /etc/skel/.config/htop/htoprc
sed -i 's/left_meters=.*/left_meters=AllCPUs Memory Swap CpuTemp/g' /etc/skel/.config/htop/htoprc
sed -i 's/left_meter_modes=.*/left_meter_modes=1 1 1 2/g' /etc/skel/.config/htop/htoprc
sed -i 's/left_meters=.*/left_meters=AllCPUs Memory Zram Swap CpuTemp/g' /etc/skel/.config/htop/htoprc
sed -i 's/left_meter_modes=.*/left_meter_modes=1 1 1 1 2/g' /etc/skel/.config/htop/htoprc
sed -i "s/right_meters=.*/right_meters=$right_meters/g" /etc/skel/.config/htop/htoprc
sed -i "s/right_meter_modes=.*/right_meter_modes=$right_meter_modes/g" /etc/skel/.config/htop/htoprc
# copy predefined settings for root user
@@ -108,7 +102,8 @@ case "$1" in
esac
# varios temporary hardware workarounds
[[ $LINUXFAMILY == rk3399 ]] && set_fixed_mac
#[[ $LINUXFAMILY == rk3399 || $LINUXFAMILY == rockchip64 ]] && [[ $BOARD != helios64 && $BOARD != khadas-edge ]] && set_fixed_mac
#[[ $LINUXFAMILY == rk3399 ]] && set_fixed_mac
systemctl disable orangepi-firstrun
exit 0
;;

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -15,9 +15,13 @@
# Read in basic OS image information
. /etc/orangepi-release
# and script configuration
. /usr/lib/orangepi/orangepi-common
# set audio
#. /usr/lib/orangepi/orangepi-audio-config
set_io_scheduler() {
# Convert kernel version to integer
@@ -48,12 +52,12 @@ prepare_board() {
CheckDevice=$(for i in /var/log /var / ; do findmnt -n -o SOURCE $i && break ; done)
# adjust logrotate configs
if [[ "${CheckDevice}" == "/dev/zram0" || "${CheckDevice}" == "orangepi-ramlog" ]]; then
for ConfigFile in /etc/logrotate.d/* ; do sed -i -e "s/\/log\//\/log.hdd\//g" "${ConfigFile}"; done
sed -i "s/\/log\//\/log.hdd\//g" /etc/logrotate.conf
if [[ "${CheckDevice}" == *"/dev/zram"* || "${CheckDevice}" == "orangepi-ramlog" ]]; then
for ConfigFile in /etc/logrotate.d/* ; do sed -i -e "s/\/var\/log\//\/var\/log.hdd\//g" "${ConfigFile}"; done
sed -i "s/\/var\/log\//\/var\/log.hdd\//g" /etc/logrotate.conf
else
for ConfigFile in /etc/logrotate.d/* ; do sed -i -e "s/\/log.hdd\//\/log\//g" "${ConfigFile}"; done
sed -i "s/\/log.hdd\//\/log\//g" /etc/logrotate.conf
for ConfigFile in /etc/logrotate.d/* ; do sed -i -e "s/\/var\/log.hdd\//\/var\/log\//g" "${ConfigFile}"; done
sed -i "s/\/var\/log.hdd\//\/var\/log\//g" /etc/logrotate.conf
fi
# unlock cpuinfo_cur_freq to be accesible by a normal user
@@ -67,7 +71,7 @@ prepare_board() {
[[ -f $prefix/cpuinfo_cur_freq ]] && chmod +r $prefix/cpuinfo_cur_freq 2> /dev/null
# enable compression where not exists
find /etc/logrotate.d/. -type f | xargs grep -H -c 'compress' | grep 0$ | cut -d':' -f1 | xargs -L1 sed -i '/{/ a compress'
find /etc/logrotate.d/. -type f | xargs grep -H -c 'compress' | grep 0$ | cut -d':' -f1 | xargs -r -L1 sed -i '/{/ a compress'
sed -i "s/#compress/compress/" /etc/logrotate.conf
# tweak ondemand cpufreq governor settings to increase cpufreq with IO load
@@ -85,12 +89,38 @@ prepare_board() {
done
fi
chmod +x /etc/update-motd.d/*
# IRQ distribution based on $BOARDFAMILY and/or $BOARD_NAME
case ${BOARD} in
rockpro64|renegade-elite|pinebook-pro|station-p1)
BOARDFAMILY=rk3399
;;
orangepi3-lts)
#aplay /usr/share/sounds/alsa/audio.wav -D hw:0,0 > /dev/null 2>&1
rfkill unblock all
/usr/bin/hciattach_opi -n -s 1500000 /dev/ttyBT0 sprd &
;;
orangepi800)
[[ -f /sys/class/leds/caps_led/brightness ]] && chmod 666 /sys/class/leds/caps_led/brightness
[[ -f /sys/class/leds/num_led/brightness ]] && chmod 666 /sys/class/leds/num_led/brightness
CODEC_CARD=1
amixer -c ${CODEC_CARD} cset name='Headphone Playback Volume' 11 > /dev/null 2>&1
amixer -c ${CODEC_CARD} cset name='DAC Playback Volume' 170 > /dev/null 2>&1
amixer -c ${CODEC_CARD} cset name='ADC Capture Volume' 190 >/dev/null 2>&1
amixer -c ${CODEC_CARD} cset name='Differential Mux' 1 >/dev/null 2>&1
if [[ -c /dev/mpp_service ]]; then
chmod 666 /dev/mpp_service
# Create dummy video node for chromium V4L2 VDA/VEA with rkmpp plugin
echo dec > /dev/video-dec0
echo enc > /dev/video-enc0
chmod 660 /dev/video-*
chown root.video /dev/video-*
fi
rfkill unblock all
/usr/bin/hciattach_opi -n -s 1500000 /dev/ttyBT0 sprd &
@@ -102,7 +132,7 @@ prepare_board() {
/usr/bin/pwm-fan.sh &
;;
orangepizero2|orangepizero2-lts|orangepizero2-b)
orangepizero2|orangepizero2-lts|orangepizero2-b|orangepi400)
if [[ $BRANCH == current ]]; then
# Initial hdmi audio
aplay /usr/share/sounds/alsa/audio.wav -D hw:0,0 > /dev/null 2>&1
@@ -116,9 +146,75 @@ prepare_board() {
rfkill unblock all
/usr/bin/hciattach_opi -n -s 1500000 /dev/ttyBT0 sprd &
;;
orangepi400)
rfkill unblock all
/usr/bin/hciattach_opi -n -s 1500000 /dev/ttyBT0 sprd &
[[ -f /sys/class/leds/caps_led/brightness ]] && chmod 666 /sys/class/leds/caps_led/brightness
[[ -f /sys/class/leds/num_led/brightness ]] && chmod 666 /sys/class/leds/num_led/brightness
;;
orangepi4-lts)
# RK3399 - 1.8GHz
# RK3399-T - 1.6GHz
sed -i "s/MAX_SPEED=.*/MAX_SPEED=$(cpufreq-info -c 4 -l | awk '{ print $2 }')/" /etc/default/cpufrequtils
CODEC_CARD=0
amixer -c ${CODEC_CARD} cset name='Differential Mux' 1 >/dev/null 2>&1
if [[ -c /dev/mpp_service ]]; then
chmod 666 /dev/mpp_service
elif [[ -c /dev/vpu_service ]]; then
chmod 666 /dev/vpu_service
fi
# Create dummy video node for chromium V4L2 VDA/VEA with rkmpp plugin
echo dec > /dev/video-dec0
echo enc > /dev/video-enc0
chmod 660 /dev/video-*
chown root.video /dev/video-*
rfkill unblock all
/usr/bin/hciattach_opi -n -s 1500000 /dev/ttyBT0 sprd &
;;
esac
case ${BOARDFAMILY} in
rockchip) # RK3288: usb1 on cpu1, usb3 (EHCI) on cpu2, eth0 and GPU on cpu3
echo 2 >/proc/irq/$(awk -F":" "/usb1/ {print \$1}" </proc/interrupts | sed 's/\ //g')/smp_affinity
echo 4 >/proc/irq/$(awk -F":" "/usb3/ {print \$1}" </proc/interrupts | sed 's/\ //g')/smp_affinity
echo 8 >/proc/irq/$(awk -F":" "/eth0/ {print \$1}" </proc/interrupts | sed 's/\ //g' | head -n1)/smp_affinity
echo 7 >/sys/class/net/eth0/queues/rx-0/rps_cpus
for i in $(awk -F':' '/gpu/{print $1}' /proc/interrupts | sed 's/\ //g'); do
echo 8 >/proc/irq/$i/smp_affinity
done
;;
rockchip64) # Rock64 and Renegade: GPU on cpu1, USB3 on cpu2, Ethernet on cpu3
for i in $(awk -F':' '/Mali/{print $1}' </proc/interrupts | sed 's/\ //g'); do
echo 2 >/proc/irq/$i/smp_affinity
done
for i in $(awk -F":" "/ehci/ {print \$1}" </proc/interrupts | sed 's/\ //g'); do
echo 2 >/proc/irq/$i/smp_affinity
done
for i in $(awk -F":" "/ohci/ {print \$1}" </proc/interrupts | sed 's/\ //g'); do
echo 2 >/proc/irq/$i/smp_affinity
done
for i in $(awk -F":" "/xhci/ {print \$1}" </proc/interrupts | sed 's/\ //g'); do
echo 4 >/proc/irq/$i/smp_affinity
done
# Wait (up to 5s) until eth0 brought up
for i in {1..5}; do
grep -q "eth0" /proc/interrupts && break
sleep 1
done
echo 8 >/proc/irq/$(awk -F":" "/eth0/ {print \$1}" </proc/interrupts | sed 's/\ //g')/smp_affinity
echo 7 >/sys/class/net/eth0/queues/rx-0/rps_cpus
echo 32768 >/proc/sys/net/core/rps_sock_flow_entries
echo 32768 >/sys/class/net/eth0/queues/rx-0/rps_flow_cnt
;;
rk3399)
for i in $(awk -F':' '/gpu/{print $1}' </proc/interrupts | sed 's/\ //g'); do
echo 2 >/proc/irq/$i/smp_affinity
@@ -126,9 +222,22 @@ prepare_board() {
for i in $(awk -F':' '/dw-mci/{print $1}' </proc/interrupts | sed 's/\ //g'); do
echo 2 >/proc/irq/$i/smp_affinity
done
echo 2 >/proc/irq/$(awk -F":" "/ehci/ {print \$1}" </proc/interrupts | sed 's/\ //g')/smp_affinity
echo 2 >/proc/irq/$(awk -F":" "/ohci/ {print \$1}" </proc/interrupts | sed 's/\ //g')/smp_affinity
echo 4 >/proc/irq/$(awk -F":" "/xhci/ {print \$1}" </proc/interrupts | sed 's/\ //g')/smp_affinity
for i in $(awk -F":" "/ehci/ {print \$1}" </proc/interrupts | sed 's/\ //g'); do
echo 2 >/proc/irq/$i/smp_affinity
done
for i in $(awk -F":" "/ohci/ {print \$1}" </proc/interrupts | sed 's/\ //g'); do
echo 2 >/proc/irq/$i/smp_affinity
done
for i in $(awk -F":" "/xhci/ {print \$1}" </proc/interrupts | sed 's/\ //g'); do
echo 4 >/proc/irq/$i/smp_affinity
done
# Wait (up to 5s) until eth0 brought up
for i in {1..5}; do
grep -q "eth0" /proc/interrupts && break
sleep 1
done
echo 8 >/proc/irq/$(awk -F":" "/eth0/ {print \$1}" </proc/interrupts | sed 's/\ //g')/smp_affinity
echo 7 >/sys/class/net/eth0/queues/rx-0/rps_cpus
echo 32768 >/proc/sys/net/core/rps_sock_flow_entries
@@ -141,6 +250,9 @@ prepare_board() {
echo performance > /sys/bus/platform/drivers/rockchip-dmc/dmc/devfreq/dmc/governor
fi
;;
sun4i|sun5i|rda8810) # only one core, nothing to improve
:
;;
sun8i*) # H3/R40/V40 boards, try to do the best based on specific board since interfaces vary a lot
# 10 or 120 sec user feedback that the board is ready after 1st login with 3.4 kernel
SwapState="$(grep swap /etc/fstab)"
@@ -202,7 +314,7 @@ prepare_board() {
echo 8 >/proc/irq/$(awk -F":" "/eth/ {print \$1}" </proc/interrupts | sed 's/\ //g' | head -n1)/smp_affinity
echo 7 >/sys/class/net/eth0/queues/rx-0/rps_cpus
# OrangePi win GMAC is very unstable on gigabit. Limit it down to 100Mb solve problems
[[ $BOARD == orangepiwin && $BRANCH == default ]] && ethtool -s eth0 speed 100 duplex full
[[ $BOARD == orangepiwin && $BRANCH == legacy ]] && ethtool -s eth0 speed 100 duplex full
;;
esac
} # prepare_board
@@ -246,6 +358,19 @@ add_usb_storage_quirks() {
} # add_usb_storage_quirks
branch_naming_workaround()
# https://armbian.atlassian.net/browse/AR-748
# Once we rework kernel packages, this can be done better
{
if [[ -z $(cat /etc/orangepi-release | grep BRANCH) ]]; then
BRANCH=$(dpkg -l | egrep "linux-image" | egrep "current|legacy|edge" | awk '{print $2}' | cut -d"-" -f3 | head -1)
[[ -n ${BRANCH} ]] && echo "BRANCH=$BRANCH" >> /etc/orangepi-release
fi
}
case $1 in
*start*)
# set optimal disk scheduler settings
@@ -256,5 +381,8 @@ case $1 in
# add usb quirks
add_usb_storage_quirks &
# branch naming workaround
branch_naming_workaround &
;;
esac

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -23,7 +23,7 @@ LOG_OUTPUT="tee -a $LOG2RAM_LOG"
isSafe () {
[ -d $HDD_LOG ] || (echo "ERROR: $HDD_LOG doesn't exist! Can't sync." >&2 ; exit 1)
NoCache=$(which nocache 2>/dev/null)
NoCache=$(command -v nocache 2>/dev/null)
}
RecreateLogs (){
@@ -48,7 +48,11 @@ syncToDisk () {
echo -e "\n\n$(date): Syncing logs to storage\n" | $LOG_OUTPUT
if [ "$USE_RSYNC" = true ]; then
${NoCache} rsync -aXWv --exclude "lost+found" --exclude orangepi-ramlog.log --links $RAM_LOG $HDD_LOG 2>&1 | $LOG_OUTPUT
${NoCache} rsync -aXWv \
--exclude "lost+found" --exclude orangepi-ramlog.log \
--links \
${XTRA_RSYNC_TO[@]+"${XTRA_RSYNC_TO[@]}"} \
$RAM_LOG $HDD_LOG 2>&1 | $LOG_OUTPUT
else
${NoCache} cp -rfup $RAM_LOG -T $HDD_LOG 2>&1 | $LOG_OUTPUT
fi
@@ -62,7 +66,12 @@ syncFromDisk () {
echo -e "\n\n$(date): Loading logs from storage\n" | $LOG_OUTPUT
if [ "$USE_RSYNC" = true ]; then
${NoCache} rsync -aXWv --delete --exclude "lost+found" --exclude orangepi-ramlog.log --exclude *.gz --exclude *.xz --exclude='*.[0-9]' --links $HDD_LOG $RAM_LOG 2>&1 | $LOG_OUTPUT
${NoCache} rsync -aXWv --delete \
--exclude "lost+found" --exclude orangepi-ramlog.log \
--exclude *.gz --exclude *.xz --exclude='*.[0-9]' \
--links \
${XTRA_RSYNC_FROM[@]+"${XTRA_RSYNC_FROM[@]}"} \
$HDD_LOG $RAM_LOG 2>&1 | $LOG_OUTPUT
else
${NoCache} find $HDD_LOG* -maxdepth 1 -type f -not \( -name '*.[0-9]' -or -name '*.xz*' -or -name '*.gz' \) | xargs cp -ut $RAM_LOG
fi
@@ -86,16 +95,17 @@ case "$1" in
mount --make-private $HDD_LOG
# Check whether zram device is available or we need to use tmpfs
if [ "$(blkid -s TYPE /dev/zram0 | awk ' { print $2 } ' | grep ext4)" ]; then
LOG_TYPE="zram"
else
LOG_TYPE="tmpfs"
fi
LOG_TYPE="tmpfs"
for rd in /dev/zram*; do
if [[ "$(e2label $rd)" == "log2ram" ]]; then
LOG_TYPE="zram"
break
fi
done
case $LOG_TYPE in
zram)
echo -e "Mounting /dev/zram0 as $RAM_LOG \c" | $LOG_OUTPUT
mount -o discard /dev/zram0 $RAM_LOG 2>&1 | $LOG_OUTPUT
echo -e "Mounting $rd as $RAM_LOG \c" | $LOG_OUTPUT
mount -o discard $rd $RAM_LOG 2>&1 | $LOG_OUTPUT
;;
tmpfs)
echo -e "Setting up $RAM_LOG as tmpfs \c" | $LOG_OUTPUT

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -50,10 +50,10 @@ do_expand_partition()
case $RESIZE_VALUE in
*%)
# percentage value, we try to use 16MiB to align partitions since this is
# the erase block size of more recent SD cards (512 byte sectors, so we use 32
# the erase block size of more recent SD cards (512 byte sectors, so we use 32768
# as divider and substract 1)
local percentage=$(echo $RESIZE_VALUE | tr -c -d '[:digit:]')
local lastsector=$(( 32 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * $percentage / 3200))}") - 1 ))
local lastsector=$(( 32768 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * $percentage / 3276800))}") - 1 ))
[[ $lastsector -lt $partend ]] && unset lastsector
;;
*s)
@@ -64,7 +64,7 @@ do_expand_partition()
esac
# if SD card is larger than 4GiB then create another partition behind first one(s)
if [[ $capacity -ge 5 ]]; then
local secondpartition=$(( 32 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 99 / 3200))}") -1 ))
local secondpartition=$(( 32768 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 99 / 3276800))}") -1 ))
if [[ $secondpartition -lt $partend ]]; then
unset secondpartition
fi
@@ -76,7 +76,7 @@ do_expand_partition()
# to use Orange Pi on a card of inappropriate size so he gets what he deserves (at least he
# should know what he's doing)
if [[ $capacity -lt 5 ]]; then # 4 GiB or less
local lastsector=$(( 32 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 95 / 3200))}") -1 ))
local lastsector=$(( 32768 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 95 / 3276800))}") -1 ))
if [[ $lastsector -lt $partend ]]; then
unset lastsector
else
@@ -84,7 +84,7 @@ do_expand_partition()
fi
elif [[ $capacity -lt 9 ]]; then # 8 GiB or less
# Leave 2 percent unpartitioned
local lastsector=$(( 32 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 98 / 3200))}") -1 ))
local lastsector=$(( 32768 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 98 / 3276800))}") -1 ))
if [[ $lastsector -lt $partend ]]; then
unset lastsector
else
@@ -92,7 +92,7 @@ do_expand_partition()
fi
else
# Leave 1 percent unpartitioned
local lastsector=$(( 32 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 99 / 3200))}") -1 ))
local lastsector=$(( 32768 * $(parted $rootdevicepath unit s print -sm | grep "^$rootdevicepath" | awk -F":" "{printf (\"%0d\", ( \$2 * 99 / 3276800))}") -1 ))
if [[ $lastsector -lt $partend ]]; then
unset lastsector
else
@@ -118,6 +118,16 @@ do_expand_partition()
((echo n; echo p; echo ; echo $(( $lastsector + 1 )); echo $secondpartition ; echo w;) | fdisk $rootdevicepath) >>${Log} 2>&1
local s=0
partprobe $rootdevicepath >>${Log} 2>&1 || s=$?
#
# Workaround for Kernel bug in 5.8.y and up. Ignore partprobe returning error and inticating that fs is not expended while it is
#
KERNELID=$(uname -r | awk -F'.' '{print ($1 * 100) + $2}')
[[ ${KERNELID} -gt 507 ]] && s=0
#
#
#
echo -e "New partition table:\n" >>${Log}
cat /proc/partitions >>${Log}
echo -e "\nNow trying to resize $1 filesystem on $rootsource to the limits:\n" >>${Log}
@@ -131,7 +141,7 @@ do_expand_partition()
ext4)
resize2fs $rootsource >>${Log} 2>&1
# check whether reboot is necessary for resize2fs to take effect
local usedpercent=$(findmnt --target / -n -o USE% -b) # images before resize have 70-75%
local usedpercent=$(findmnt --target / -n -o USE% -b | sed 's/[^0-9]*//g') # images before resize have 70-75%
if [[ $s != 0 || $usedpercent -gt 70 ]]; then
touch /var/run/resize2fs-reboot
echo -e "\n### [resize2fs] Automated reboot needed to finish the resize procedure" >>${Log}

View File

@@ -1,6 +1,6 @@
#!/bin/sh
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -10,6 +10,7 @@
# working only when orangepi-ramlog is enabled
treshold=75 # %
JOURNAL_SIZE=5M # size to shrink systemd-journal
[ -f /etc/default/orangepi-ramlog ] && . /etc/default/orangepi-ramlog
@@ -27,4 +28,6 @@ if [ $logusage -ge $treshold ]; then
/usr/bin/find /var/log -name 'mail.err' -or -name 'mail.info' -or -name 'mail.warning' | xargs -r truncate --size 0
# remove
/usr/bin/find /var/log -name '*.[0-9]' -or -name '*.gz' | xargs -r rm -f
# vacuum systemd-journald
[ -d /var/log/journal ] && journalctl --vacuum-size=${JOURNAL_SIZE}
fi

View File

@@ -1,6 +1,6 @@
#!/bin/bash
#
# Copyright (c) Authors: http://www.armbian.com/authors
# Copyright (c) Authors: https://www.armbian.com/authors
#
# This file is licensed under the terms of the GNU General Public
# License version 2. This program is licensed "as is" without any
@@ -8,6 +8,7 @@
# Functions:
#
# activate_zram
# activate_zram_swap
# activate_ramlog_partition
# activate_compressed_tmp
@@ -18,16 +19,17 @@
# and script configuration
. /usr/lib/orangepi/orangepi-common
# It's possible to override ZRAM_PERCENTAGE, ZRAM_MAX_DEVICES, SWAP_ALGORITHM,
# RAMLOG_ALGORITHM and TMP_ALGORITHM here:
# It's possible to override SWAP, ZRAM_PERCENTAGE, MEM_LIMIT_PERCENTAGE, ZRAM_MAX_DEVICES,
# SWAP_ALGORITHM, RAMLOG_ALGORITHM, TMP_ALGORITHM and TMP_SIZE here:
ENABLED=false
[ -f /etc/default/orangepi-zram-config ] && . /etc/default/orangepi-zram-config
# Exit if not Enabled
[[ "$ENABLED" != "true" ]] && exit 0
activate_zram_swap() {
# Do not interfere with already present config-zram package
dpkg -l | grep -q 'zram-config' && exit 0
[[ "$ENABLED" != "true" ]] && exit 0
# Do not interfere with already present zram-config package
dpkg -l | grep -q 'zram-config' && exit 0
activate_zram() {
# Load zram module with n instances for swap: one per CPU core, $ZRAM_MAX_DEVICES
# defines the maximum, on modern kernels we overwrite this with 1 and rely on
# max_comp_streams being set to count of CPU cores or $ZRAM_MAX_DEVICES
@@ -37,36 +39,50 @@ activate_zram_swap() {
module_args="$(modinfo zram | awk -F" " '/num_devices/ {print $2}' | cut -f1 -d:)"
[[ -n ${module_args} ]] && modprobe zram ${module_args}=$(( ${zram_devices} + 2 )) || return
swap_algo=${SWAP_ALGORITHM:=lzo}
# Expose 50% of real memory as swap space by default
zram_percent=${ZRAM_PERCENTAGE:=50}
mem_info=$(LC_ALL=C free -w 2>/dev/null | grep "^Mem" || LC_ALL=C free | grep "^Mem")
memory_total=$(awk '{printf("%d",$2*1024)}' <<<${mem_info})
mem_info=$(echo $mem_info | awk '{print $2}')
memory_total=$(( mem_info * 1024 ))
mem_per_zram_device=$(( ${memory_total} / ${zram_devices} * ${zram_percent} / 100 ))
# Limit memory available to zram to 50% by default
mem_limit_percent=${MEM_LIMIT_PERCENTAGE:=50}
mem_limit_per_zram_device=$(( ${memory_total} / ${zram_devices} * ${mem_limit_percent} / 100 ))
}
activate_zram_swap() {
# Return is SWAP is disabled (enabled by default)
[[ -n "$SWAP" && "$SWAP" != "true" ]] && return;
# Disable zswap if zram should be used. To make use of zswap instead a
# swap file or partition on *capable* storage needs to be chosen and
# defined as swap and also in /etc/default/orangepi-zram-config SWAP=false
# needs to be set.
echo 0 >/sys/module/zswap/parameters/enabled 2>/dev/null
# Limit Journal size to 20Mb
sed -i "s/.*SystemMaxUse=$/SystemMaxUse=20M/" /etc/systemd/journald.conf
swap_algo=${SWAP_ALGORITHM:=lzo}
for (( i=1; i<=zram_devices; i++ )); do
if [ -f /sys/block/zram${i}/comp_algorithm ]; then
swap_device=$(zramctl -f |sed 's/\/dev\///')
[[ ! ${swap_device} =~ ^zram ]] && echo -e "\n### No more available zram devices (${swap_device})\n" >>${Log} && exit 1;
if [ -f /sys/block/${swap_device}/comp_algorithm ]; then
# set compression algorithm, if defined as lzo choose lzo-rle if available
# https://www.phoronix.com/scan.php?page=news_item&px=ZRAM-Linux-5.1-Better-Perform
grep -q 'lzo-rle' /sys/block/zram${i}/comp_algorithm && \
grep -q 'lzo-rle' /sys/block/${swap_device}/comp_algorithm && \
[[ "X${swap_algo}" = "Xlzo" ]] && swap_algo="lzo-rle"
echo ${swap_algo} >/sys/block/zram${i}/comp_algorithm 2>/dev/null
echo ${swap_algo} >/sys/block/${swap_device}/comp_algorithm 2>/dev/null
fi
if [ "X${ZRAM_BACKING_DEV}" != "X" ]; then
echo ${ZRAM_BACKING_DEV} >/sys/block/zram${i}/backing_dev
echo ${ZRAM_BACKING_DEV} >/sys/block/${swap_device}/backing_dev
fi
echo -n ${ZRAM_MAX_DEVICES:=4} > /sys/block/zram${i}/max_comp_streams
echo -n ${mem_per_zram_device} > /sys/block/zram${i}/disksize
echo -n ${mem_limit_per_zram_device} > /sys/block/zram${i}/mem_limit
mkswap /dev/zram${i}
swapon -p 5 /dev/zram${i}
echo -n ${ZRAM_MAX_DEVICES:=4} > /sys/block/${swap_device}/max_comp_streams
echo -n ${mem_per_zram_device} > /sys/block/${swap_device}/disksize
echo -n ${mem_limit_per_zram_device} > /sys/block/${swap_device}/mem_limit
mkswap /dev/${swap_device}
swapon -p 5 /dev/${swap_device}
done
# Swapping to HDDs is stupid so switch to settings made for flash memory and zram/zswap
@@ -80,7 +96,9 @@ activate_ramlog_partition() {
# ENABLED=true in /etc/default/orangepi-ramlog is set
ENABLED=$(awk -F"=" '/^ENABLED/ {print $2}' /etc/default/orangepi-ramlog)
[[ "$ENABLED" != "true" ]] && return
log_device=$(zramctl -f |sed 's/\/dev\///')
[[ ! ${log_device} =~ ^zram ]] && echo -e "\n### No more available zram devices (${log_device})\n" >>${Log} && exit 1;
# read size also from /etc/default/orangepi-ramlog
ramlogsize=$(awk -F"=" '/^SIZE/ {print $2}' /etc/default/orangepi-ramlog)
disksize=$(sed -e 's/M$/*1048576/' -e 's/K$/*1024/' <<<${ramlogsize:=50M} | bc)
@@ -90,46 +108,48 @@ activate_ramlog_partition() {
# See https://patchwork.kernel.org/patch/9918897/
if [ "X${RAMLOG_ALGORITHM}" = "X" ]; then
for algo in lz4 lz4hc quicklz zlib brotli zstd ; do
echo ${algo} >/sys/block/zram0/comp_algorithm 2>/dev/null
echo ${algo} >/sys/block/${log_device}/comp_algorithm 2>/dev/null
done
else
echo ${RAMLOG_ALGORITHM} >/sys/block/zram0/comp_algorithm 2>/dev/null
echo ${RAMLOG_ALGORITHM} >/sys/block/${log_device}/comp_algorithm 2>/dev/null
fi
echo -n ${disksize} > /sys/block/zram0/disksize
echo -n ${disksize} > /sys/block/${log_device}/disksize
# if it fails, select $swap_algo. Workaround for some older kernels
if [[ $? == 1 ]]; then
echo ${swap_algo} > /sys/block/zram0/comp_algorithm 2>/dev/null
echo -n ${disksize} > /sys/block/zram0/disksize
echo ${swap_algo} > /sys/block/${log_device}/comp_algorithm 2>/dev/null
echo -n ${disksize} > /sys/block/${log_device}/disksize
fi
mkfs.ext4 -O ^has_journal -s 1024 -L log2ram /dev/zram0
algo=$(sed 's/.*\[\([^]]*\)\].*/\1/g' </sys/block/zram0/comp_algorithm)
mkfs.ext4 -O ^has_journal -s 1024 -L log2ram /dev/${log_device}
algo=$(sed 's/.*\[\([^]]*\)\].*/\1/g' </sys/block/${log_device}/comp_algorithm)
echo -e "### Activated Orange Pi ramlog partition with ${algo} compression" >>${Log}
} # activate_ramlog_partition
activate_compressed_tmp() {
# create /tmp not as tmpfs but zram compressed if no fstab entry exists
grep -q '^tmpfs /tmp' /etc/mtab && return
tmp_device=$(zramctl -f |sed 's/\/dev\///')
[[ ! ${tmp_device} =~ ^zram ]] && echo -e "\n### No more available zram devices (${tmp_device})\n" >>${Log} && exit 1;
tmp_device=$(( ${zram_devices} + 1 ))
if [[ -f /sys/block/zram${tmp_device}/comp_algorithm ]]; then
if [[ -f /sys/block/${tmp_device}/comp_algorithm ]]; then
if [ "X${TMP_ALGORITHM}" = "X" ]; then
echo ${swap_algo} >/sys/block/zram${tmp_device}/comp_algorithm 2>/dev/null
echo ${swap_algo} >/sys/block/${tmp_device}/comp_algorithm 2>/dev/null
else
echo ${TMP_ALGORITHM} >/sys/block/zram${tmp_device}/comp_algorithm 2>/dev/null
echo ${TMP_ALGORITHM} >/sys/block/${tmp_device}/comp_algorithm 2>/dev/null
fi
fi
echo -n $(( ${memory_total} / 2 )) > /sys/block/zram${tmp_device}/disksize
mkfs.ext4 -O ^has_journal -s 1024 -L tmp /dev/zram${tmp_device}
mount -o nosuid,discard /dev/zram${tmp_device} /tmp
chmod 777 /tmp
algo=$(sed 's/.*\[\([^]]*\)\].*/\1/g' </sys/block/zram${tmp_device}/comp_algorithm)
[[ -z ${TMP_SIZE} ]] && echo -n $(( ${memory_total} / 2 )) > /sys/block/${tmp_device}/disksize || echo -n ${TMP_SIZE} > /sys/block/${tmp_device}/disksize
mkfs.ext4 -O ^has_journal -s 1024 -L tmp /dev/${tmp_device}
mount -o nosuid,discard /dev/${tmp_device} /tmp
chmod 1777 /tmp
algo=$(sed 's/.*\[\([^]]*\)\].*/\1/g' </sys/block/${tmp_device}/comp_algorithm)
echo -e "\n### Activated ${algo} compressed /tmp" >>${Log}
} # activate_compressed_tmp
case $1 in
*start*)
activate_zram
activate_zram_swap
activate_ramlog_partition
activate_compressed_tmp

View File

@@ -64,11 +64,11 @@ fi
mkopts[btrfs]='-f'
mkopts[f2fs]='-f'
mountopts[ext2]='defaults,noatime,nodiratime,commit=600,errors=remount-ro,x-gvfs-hide 0 1'
mountopts[ext3]='defaults,noatime,nodiratime,commit=600,errors=remount-ro,x-gvfs-hide 0 1'
mountopts[ext4]='defaults,noatime,nodiratime,commit=600,errors=remount-ro,x-gvfs-hide 0 1'
mountopts[btrfs]='defaults,noatime,nodiratime,commit=600,compress=lzo,x-gvfs-hide 0 2'
mountopts[f2fs]='defaults,noatime,nodiratime,x-gvfs-hide 0 2'
mountopts[ext2]='defaults,noatime,commit=600,errors=remount-ro,x-gvfs-hide 0 1'
mountopts[ext3]='defaults,noatime,commit=600,errors=remount-ro,x-gvfs-hide 0 1'
mountopts[ext4]='defaults,noatime,commit=600,errors=remount-ro,x-gvfs-hide 0 1'
mountopts[btrfs]='defaults,noatime,commit=600,compress=lzo,x-gvfs-hide 0 2'
mountopts[f2fs]='defaults,noatime,x-gvfs-hide 0 2'
# Create boot and root file system "$1" = boot, "$2" = root (Example: create_orangepi "/dev/nand1" "/dev/sda3")
create_orangepi()
@@ -193,7 +193,7 @@ create_orangepi()
This will take approximately $(( $((USAGE/300)) * 1 )) minutes to finish. Please wait!\n\n" 11 80
# run rsync again to silently catch outstanding changes between / and "${TempDir}"/rootfs/
dialog --title "$title" --backtitle "$backtitle" --infobox "\n Cleaning up ... Almost done." 5 40
dialog --title "$title" --backtitle "$backtitle" --infobox "\n Cleaning up ... Almost done." 5 60
rsync -avrltD --delete --exclude-from=$EX_LIST / "${TempDir}"/rootfs >/dev/null 2>&1
# creating fstab from scratch
@@ -211,7 +211,7 @@ create_orangepi()
echo "Finishing installation to NAND." >> $logfile
REMOVESDTXT="and remove SD to boot from NAND"
echo "$1 /boot vfat defaults 0 0" >> "${TempDir}"/rootfs/etc/fstab
echo "$2 / ext4 defaults,noatime,nodiratime,commit=600,errors=remount-ro 0 1" >> "${TempDir}"/rootfs/etc/fstab
echo "$2 / ext4 defaults,noatime,commit=600,errors=remount-ro 0 1" >> "${TempDir}"/rootfs/etc/fstab
dialog --title "$title" --backtitle "$backtitle" --infobox "\nConverting kernel ... few seconds." 5 60
mkimage -A arm -O linux -T kernel -C none -a "0x40008000" -e "0x40008000" -n "Linux kernel" -d \
/boot/zImage "${TempDir}"/bootfs/uImage >/dev/null 2>&1
@@ -278,7 +278,13 @@ create_orangepi()
[[ -f "${TempDir}"/bootfs/boot/boot.ini ]] && sed -e 's,^setenv rootdev.*$,setenv rootdev "'"$targetuuid"'",' -i "${TempDir}"/bootfs/boot/boot.ini
[[ -f "${TempDir}"/rootfs/boot/boot.ini ]] && sed -e 's,^setenv rootdev.*$,setenv rootdev "'"$targetuuid"'",' -i "${TempDir}"/rootfs/boot/boot.ini
fi
mkimage -C none -A arm -T script -d "${TempDir}"/bootfs/boot/boot.cmd "${TempDir}"/bootfs/boot/boot.scr >/dev/null 2>&1 || (echo 'Error while creating U-Boot loader image with mkimage' >&2 ; exit 5)
if [[ -f "${TempDir}"/bootfs/boot/extlinux/extlinux.conf ]]; then
sed -e 's,root='"$root_uuid"',root='"$targetuuid"',g' -i "${TempDir}"/bootfs/boot/extlinux/extlinux.conf
[[ -f "${TempDir}"/bootfs/boot/boot.cmd ]] && rm "${TempDir}"/bootfs/boot/boot.cmd
else
mkimage -C none -A arm -T script -d "${TempDir}"/bootfs/boot/boot.cmd "${TempDir}"/bootfs/boot/boot.scr >/dev/null 2>&1 || (echo 'Error while creating U-Boot loader image with mkimage' >&2 ; exit 5)
fi
# fstab adj
if [[ "$1" != "$2" ]]; then
@@ -327,6 +333,10 @@ create_orangepi()
sed -e 's,setenv rootfstype.*,setenv rootfstype '"$FilesystemChoosen"',' -i /boot/boot.cmd
sed -e 's,setenv rootfstype.*,setenv rootfstype '"$FilesystemChoosen"',' -i /boot/boot.ini
fi
if [[ -f /bootfs/boot/extlinux/extlinux.conf ]]; then
sed -e 's,root='"$root_uuid"',root='"$satauuid"',g' -i /boot/extlinux/extlinux.conf
[[ -f /boot/boot.cmd ]] && rm /boot/boot.cmd
fi
[[ -f /boot/boot.cmd ]] && mkimage -C none -A arm -T script -d /boot/boot.cmd /boot/boot.scr >/dev/null 2>&1 || (echo 'Error while creating U-Boot loader image with mkimage' >&2 ; exit 7)
mkdir -p "${TempDir}"/rootfs/media/mmc/boot
echo "${sduuid} /media/mmcboot ext4 ${mountopts[ext4]}" >> "${TempDir}"/rootfs/etc/fstab
@@ -407,7 +417,7 @@ format_nand()
show_nand_warning
dialog --title "$title" --backtitle "$backtitle" --infobox "\nFormating ... up to one minute." 5 40
dialog --title "$title" --backtitle "$backtitle" --infobox "\n Formatting ... up to one minute." 5 60
if [[ $DEVICE_TYPE = a20 ]]; then
(echo y;) | sunxi-nand-part -f a20 /dev/nand 65536 'bootloader 65536' 'linux 0' >> $logfile 2>&1
else
@@ -443,15 +453,21 @@ format_emmc()
QUOTED_DEVICE=$(echo "$1" | sed 's:/:\\\/:g')
CAPACITY=$(parted "$1" unit s print -sm | awk -F":" "/^${QUOTED_DEVICE}/ {printf (\"%0d\", \$2 / ( 1024 / \$4 ))}")
# We use 16MiB to align partitions which may overestimate the erase block
# size of a NAND device. Overestimating is harmless. (512 byte
# sectors, so we use 32768 as divider and substract 1)
if [[ $CAPACITY -lt 4000000 ]]; then
# Leave 2 percent unpartitioned when eMMC size is less than 4GB (unlikely)
LASTSECTOR=$(( 32 * $(parted "$1" unit s print -sm | awk -F":" "/^${QUOTED_DEVICE}/ {printf (\"%0d\", ( \$2 * 98 / 3200))}") -1 ))
LASTSECTOR=$(( 32768 * $(parted "$1" unit s print -sm | awk -F":" "/^${QUOTED_DEVICE}/ {printf (\"%0d\", ( \$2 * 98 / 3276800))}") -1 ))
else
# Leave 1 percent unpartitioned
LASTSECTOR=$(( 32 * $(parted "$1" unit s print -sm | awk -F":" "/^${QUOTED_DEVICE}/ {printf (\"%0d\", ( \$2 * 99 / 3200))}") -1 ))
LASTSECTOR=$(( 32768 * $(parted "$1" unit s print -sm | awk -F":" "/^${QUOTED_DEVICE}/ {printf (\"%0d\", ( \$2 * 99 / 3276800))}") -1 ))
fi
parted -s "$1" -- mklabel msdos
# get target partition table type from the root partition device
PART_TABLE_TYPE=$(parted "$root_partition_device" print -sm | awk -F ":" -v pattern="$root_partition_device" '$0 ~ pattern {print $6}')
parted -s "$1" -- mklabel "$PART_TABLE_TYPE"
dialog --title "$title" --backtitle "$backtitle" --infobox "\nFormating $1 to $eMMCFilesystemChoosen ... please wait." 5 60
# we can't boot from btrfs or f2fs
if [[ $eMMCFilesystemChoosen =~ ^(btrfs|f2fs)$ ]]; then
@@ -461,7 +477,7 @@ format_emmc()
fi
# default boot partition size, in MiB
DEFAULT_BOOTSIZE=96
DEFAULT_BOOTSIZE=256
# (convert to sectors for partitioning)
DEFAULT_BOOTSIZE_SECTORS=$(((${DEFAULT_BOOTSIZE} * 1024 * 1024) / 512))
@@ -573,7 +589,7 @@ update_bootscript()
# show warning [TEXT]
show_warning()
{
dialog --title "$title" --backtitle "$backtitle" --cr-wrap --colors --yesno " \Z1$(toilet -W -f ascii9 WARNING)\Zn\n$1" 14 53
dialog --title "$title" --backtitle "$backtitle" --cr-wrap --colors --yesno " \Z1$(toilet -W -f ascii9 ' WARNING')\Zn\n$1" 16 67
[[ $? -ne 0 ]] && exit 13
}
@@ -587,6 +603,20 @@ stop_running_services()
done
}
# show warning and write u-boot to SPI flash $1 = spi device name, $2 = u-boot files directory
write_uboot_to_spi_flash()
{
local MTD_BLK="/dev/$1"
local DIR="$2"
local MESSAGE="This script will update the bootloader on SPI Flash $MTD_BLK. Continue?\nIt will take up to a few minutes."
dialog --title "$title" --backtitle "$backtitle" --cr-wrap --colors --yesno " \Z1$(toilet -W -f ascii9 ' WARNING')\Zn\n$MESSAGE" 16 67
if [[ $? -eq 0 ]]; then
write_uboot_platform_mtd "$DIR" $MTD_BLK
update_bootscript
echo 'Done'
fi
}
main()
{
export PATH=/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin
@@ -599,15 +629,15 @@ main()
# Check if we run it from SD card
# TODO: Disable/remove this in the future
case ${root_partition_device} in
/dev/mmcblk*) # mmc device, we can continue
:
;;
*)
dialog --title "$title" --backtitle "$backtitle" --colors --infobox '\n\Z1This tool must run from SD-card! \Zn' 5 37
exit 15
;;
esac
# case ${root_partition_device} in
# /dev/mmcblk*) # mmc device, we can continue
# :
# ;;
# *)
# dialog --title "$title" --backtitle "$backtitle" --colors --infobox '\n\Z1 This tool must run from SD-card! \Zn' 5 60
# exit 15
# ;;
# esac
[ -f $logfile ] && echo -e '\n\n\n' >> $logfile
LANG=C echo -e "$(date): Start ${0##*/}.\n" >> $logfile
@@ -691,6 +721,15 @@ main()
show_warning "This script will erase your device $DISK_ROOT_PART. Continue?"
format_disk "$DISK_ROOT_PART"
create_orangepi 'spi' "$DISK_ROOT_PART"
if [[ $(type -t write_uboot_platform_mtd) == function ]]; then
dialog --title "$title" --backtitle "$backtitle" --yesno \
"Do you want to write the bootloader to SPI flash?\n\nIt is required if you have not done it before or if you have some non-OrangePi bootloader in SPI." 8 60
if [[ $? -eq 0 ]]; then
write_uboot_to_spi_flash $spicheck "$DIR"
fi
fi
;;
5)
show_warning 'This script will update the bootloader on SD/eMMC. Continue?'
@@ -711,11 +750,7 @@ main()
return
;;
7)
MTD_BLK="/dev/${spicheck}"
show_warning "This script will update the bootloader on SPI Flash $MTD_BLK. Continue?"
write_uboot_platform_mtd "$DIR" $MTD_BLK
update_bootscript
echo 'Done'
write_uboot_to_spi_flash $spicheck "$DIR"
return
;;
esac

View File

@@ -36,7 +36,7 @@ fi
. /etc/orangepi-release
case "${LINUXFAMILY}" in
sunxi|sunxi64|rockchip64|sun50iw9)
sunxi|sunxi64|rockchip64|sun50iw9|rk3399)
:;;
*)
echo >&2 "Overlays are not supported on ${LINUXFAMILY^} based boards."