Support Orange Pi CM4/3B

external/packages/bsp/rk356x/etc/X11/xorg.conf.d/20-modesetting.conf

@@ -0,0 +1,33 @@
+Section "Device"
+    Identifier  "Rockchip Graphics"
+    Driver      "modesetting"
+
+### Use Rockchip RGA 2D HW accel
+#    Option      "AccelMethod"    "exa"
+
+### Use GPU HW accel
+    Option      "AccelMethod"    "glamor"
+
+    Option      "DRI"            "2"
+
+### Set to "always" to avoid tearing, could lead to up 50% performance loss
+    Option      "FlipFB"         "always"
+
+### Limit flip rate and drop frames for "FlipFB" to reduce performance lost
+#    Option      "MaxFlipRate"    "60"
+
+    Option      "NoEDID"         "true"
+    Option	"UseGammaLUT"	 "true"
+EndSection
+
+Section	"Screen"
+    Identifier	"Default Screen"
+    Device	"Rockchip Graphics"
+    Monitor	"Default Monitor"
+EndSection
+
+### Valid values for rotation are "normal", "left", "right"
+Section	"Monitor"
+    Identifier	"Default Monitor"
+    Option	"Rotate" "normal"
+EndSection

external/packages/bsp/rk356x/etc/docker/daemon.json

@@ -0,0 +1,5 @@
+{
+  "registry-mirrors": [
+    "https://docker.mirrors.ustc.edu.cn"
+  ]
+}

external/packages/bsp/rk356x/etc/mpv/mpv.conf

@@ -0,0 +1,141 @@
+#
+# mpv configuration file
+#
+# Warning:
+#
+# The commented example options usually do _not_ set the default values. Call
+# mpv with --list-options to see the default values for most options. There is
+# no builtin or example mpv.conf with all the defaults.
+#
+#
+# Configuration files are read system-wide from /usr/local/etc/mpv.conf
+# and per-user from ~/.config/mpv/mpv.conf, where per-user settings override
+# system-wide settings, all of which are overridden by the command line.
+#
+# Configuration file settings and the command line options use the same
+# underlying mechanisms. Most options can be put into the configuration file
+# by dropping the preceding '--'. See the man page for a complete list of
+# options.
+#
+# Lines starting with '#' are comments and are ignored.
+#
+# See the CONFIGURATION FILES section in the man page
+# for a detailed description of the syntax.
+#
+# Profiles should be placed at the bottom of the configuration file to ensure
+# that settings wanted as defaults are not restricted to specific profiles.
+
+##################
+# video settings #
+##################
+
+# Start in fullscreen mode by default.
+#fs=yes
+
+# force starting with centered window
+#geometry=50%:50%
+
+# don't allow a new window to have a size larger than 90% of the screen size
+#autofit-larger=90%x90%
+
+# Do not close the window on exit.
+#keep-open=yes
+
+# Do not wait with showing the video window until it has loaded. (This will
+# resize the window once video is loaded. Also always shows a window with
+# audio.)
+#force-window=immediate
+
+# Disable the On Screen Controller (OSC).
+#osc=no
+
+# Keep the player window on top of all other windows.
+#ontop=yes
+
+# Specify high quality video rendering preset (for --vo=gpu only)
+# Can cause performance problems with some drivers and GPUs.
+#profile=gpu-hq
+
+# Force video to lock on the display's refresh rate, and change video and audio
+# speed to some degree to ensure synchronous playback - can cause problems
+# with some drivers and desktop environments.
+#video-sync=display-resample
+
+# Enable hardware decoding if available. Often, this does not work with all
+# video outputs, but should work well with default settings on most systems.
+# If performance or energy usage is an issue, forcing the vdpau or vaapi VOs
+# may or may not help.
+hwdec=rkmpp
+
+# Specify default video output.
+vo=xv
+
+##################
+# audio settings #
+##################
+
+# Specify default audio device. You can list devices with: --audio-device=help
+# The option takes the device string (the stuff between the '...').
+#audio-device=alsa/default
+
+# Do not filter audio to keep pitch when changing playback speed.
+#audio-pitch-correction=no
+
+# Output 5.1 audio natively, and upmix/downmix audio with a different format.
+#audio-channels=5.1
+# Disable any automatic remix, _if_ the audio output accepts the audio format.
+# of the currently played file. See caveats mentioned in the manpage.
+# (The default is "auto-safe", see manpage.)
+#audio-channels=auto
+
+##################
+# other settings #
+##################
+
+# Pretend to be a web browser. Might fix playback with some streaming sites,
+# but also will break with shoutcast streams.
+#user-agent="Mozilla/5.0"
+
+# cache settings
+#
+# Use 150MB input cache by default. The cache is enabled for network streams only.
+#cache-default=153600
+#
+# Use 150MB input cache for everything, even local files.
+#cache=153600
+#
+# Disable the behavior that the player will pause if the cache goes below a
+# certain fill size.
+#cache-pause=no
+#
+# Read ahead about 5 seconds of audio and video packets.
+#demuxer-readahead-secs=5.0
+#
+# Raise readahead from demuxer-readahead-secs to this value if a cache is active.
+#cache-secs=50.0
+
+# Display English subtitles if available.
+#slang=en
+
+# Play Finnish audio if available, fall back to English otherwise.
+#alang=fi,en
+
+# Change subtitle encoding. For Arabic subtitles use 'cp1256'.
+# If the file seems to be valid UTF-8, prefer UTF-8.
+# (You can add '+' in front of the codepage to force it.)
+#sub-codepage=cp1256
+
+# You can also include other configuration files.
+#include=/path/to/the/file/you/want/to/include
+
+############
+# Profiles #
+############
+
+# The options declared as part of profiles override global default settings,
+# but only take effect when the profile is active.
+
+# The following profile can be enabled on the command line with: --profile=eye-cancer
+
+#[eye-cancer]
+#sharpen=5

external/packages/bsp/rk356x/etc/profile.d/cogl.sh

@@ -0,0 +1 @@
+export COGL_DRIVER=gles2

external/packages/bsp/rk356x/etc/profile.d/gst.sh

@@ -0,0 +1,74 @@
+export GST_GL_API=gles2
+export GST_GL_PLATFORM=egl
+
+export GST_DEBUG_NO_COLOR=1
+export GST_INSPECT_NO_COLORS=1
+
+# Skip vstride aligning, which is not required when using RKVENC.
+# export GST_MPP_ENC_UNALIGNED_VSTRIDE=1
+
+# Convert to NV12(using RGA) when output format is NV12_10.
+# export GST_MPP_DEC_DISABLE_NV12_10=1
+
+# Convert to NV12(using RGA) when output format is not NV12.
+# export GST_MPP_VIDEODEC_DEFAULT_FORMAT=NV12
+
+# Try to use ARM AFBC to get better performance, but not work for all sinks.
+# export GST_MPP_VIDEODEC_DEFAULT_ARM_AFBC=1
+
+# Use below env variables to configure kmssink plane ZPOS.
+# export KMSSINK_PLANE_ZPOS=0
+# export KMSSINK_PLANE_ON_TOP=1
+# export KMSSINK_PLANE_ON_BOTTOM=1
+
+# There's an extra vsync waiting in kmssink, which is only needed for BSP 4.4
+# kernel(due to ecac2033831e FROMLIST: drm: skip wait on vblank for set plane).
+# Skip it would bring better performance with frame dropping.
+# export KMSSINK_DISABLE_VSYNC=1
+
+# The waylandsink is async by default, which allows frame dropping.
+# export WAYLANDSINK_SYNC_FRAME=1
+
+# Put video surface above UI window in waylandsink.
+# export WAYLANDSINK_PLACE_ABOVE=1
+
+# Preferred formats for V4L2
+export GST_V4L2_PREFERRED_FOURCC=NV12:YU12:NV16:YUY2
+
+# Preferred formats for videoconvert
+export GST_VIDEO_CONVERT_PREFERRED_FORMAT=NV12:NV16:I420:YUY2
+
+# Using libv4l2 for V4L2
+export GST_V4L2_USE_LIBV4L2=1
+
+# Default device for v4l2src
+export GST_V4L2SRC_DEFAULT_DEVICE=/dev/video-camera0
+
+# Available RK devices for v4l2src
+export GST_V4L2SRC_RK_DEVICES=_mainpath:_selfpath:_bypass:_scale
+
+# Max resolution for v4l2src
+export GST_V4L2SRC_MAX_RESOLUTION=3840x2160
+
+# Preferred sinks for playbin3(autoaudiosink/autovideosink) and playbin.
+# export AUTOAUDIOSINK_PREFERRED=alsasink
+# export AUTOVIDEOSINK_PREFERRED=waylandsink
+# export PLAYBIN2_PREFERRED_AUDIOSINK=alsasink
+# export PLAYBIN2_PREFERRED_VIDEOSINK=waylandsink
+
+# Try RGA 2D accel in videoconvert, videoscale and videoflip.
+# NOTE: Might not success, and might behave different from the official plugin.
+# export GST_VIDEO_CONVERT_USE_RGA=1
+# export GST_VIDEO_FLIP_USE_RGA=1
+export GST_MPP_NO_RGA=1
+
+# Default rotation for camerabin2:
+# clockwise(90)|rotate-180|counterclockwise(270)|horizontal-flip|vertical-flip
+# export CAMERA_FLIP=clockwise
+if [ $CAMERA_FLIP ]; then
+	CAMERA_FILTER="videoflip method=$CAMERA_FLIP"
+	export CAMERABIN2_PREVIEW_FILTER=$CAMERA_FILTER
+	export CAMERABIN2_IMAGE_FILTER=$CAMERA_FILTER
+	export CAMERABIN2_VIDEO_FILTER=$CAMERA_FILTER
+	export CAMERABIN2_VIEWFINDER_FILTER=$CAMERA_FILTER
+fi

external/packages/bsp/rk356x/etc/profile.d/usbdevice.sh

@@ -0,0 +1,13 @@
+#!/bin/sh
+
+# The env variables below can be overridden
+
+# option: adb acm hid mtp ntb rndis uac1 uac2 ums uvc
+export USB_FUNCS="adb"
+
+export UMS_FILE=/userdata/ums_shared.img
+export UMS_SIZE=256M
+export UMS_FSTYPE=vfat
+export UMS_MOUNT=0
+export UMS_MOUNTPOINT=/mnt/ums
+export UMS_RO=0

external/packages/bsp/rk356x/etc/profile.d/x11.sh

@@ -0,0 +1,2 @@
+export DISPLAY=${DISPLAY:-:0}
+export TERM=${TERM:-linux}

external/packages/bsp/rk356x/etc/pulse/client.conf

@@ -0,0 +1,35 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for PulseAudio clients. See pulse-client.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; default-sink =
+; default-source =
+default-server = unix:/tmp/pulse-socket
+; default-dbus-server =
+
+; autospawn = yes
+; daemon-binary = /usr/bin/pulseaudio
+; extra-arguments = --log-target=syslog
+
+; cookie-file =
+
+; enable-shm = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+
+; auto-connect-localhost = no
+; auto-connect-display = no

external/packages/bsp/rk356x/etc/pulse/daemon.conf

@@ -0,0 +1,92 @@
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+## Configuration file for the PulseAudio daemon. See pulse-daemon.conf(5) for
+## more information. Default values are commented out.  Use either ; or # for
+## commenting.
+
+; daemonize = no
+; fail = yes
+; allow-module-loading = yes
+allow-exit = no
+; use-pid-file = yes
+; system-instance = no
+; local-server-type = user
+; enable-shm = yes
+; enable-memfd = yes
+; shm-size-bytes = 0 # setting this 0 will use the system-default, usually 64 MiB
+; lock-memory = no
+; cpu-limit = no
+
+; high-priority = yes
+; nice-level = -11
+
+; realtime-scheduling = yes
+; realtime-priority = 5
+
+exit-idle-time = -1
+; scache-idle-time = 20
+
+; dl-search-path = (depends on architecture)
+
+; load-default-script-file = yes
+; default-script-file = /etc/pulse/default.pa
+
+; log-target = auto
+; log-level = notice
+; log-meta = no
+; log-time = no
+; log-backtrace = 0
+
+; resample-method = speex-float-1
+; avoid-resampling = false
+; enable-remixing = yes
+; remixing-use-all-sink-channels = yes
+; remixing-produce-lfe = no
+; remixing-consume-lfe = no
+; lfe-crossover-freq = 0
+
+; flat-volumes = no
+
+; rescue-streams = yes
+
+; rlimit-fsize = -1
+; rlimit-data = -1
+; rlimit-stack = -1
+; rlimit-core = -1
+; rlimit-as = -1
+; rlimit-rss = -1
+; rlimit-nproc = -1
+; rlimit-nofile = 256
+; rlimit-memlock = -1
+; rlimit-locks = -1
+; rlimit-sigpending = -1
+; rlimit-msgqueue = -1
+; rlimit-nice = 31
+; rlimit-rtprio = 9
+; rlimit-rttime = 200000
+
+; default-sample-format = s16le
+; default-sample-rate = 44100
+; alternate-sample-rate = 48000
+; default-sample-channels = 2
+; default-channel-map = front-left,front-right
+
+; default-fragments = 4
+; default-fragment-size-msec = 25
+
+; enable-deferred-volume = yes
+; deferred-volume-safety-margin-usec = 8000
+; deferred-volume-extra-delay-usec = 0

external/packages/bsp/rk356x/etc/pulse/default.pa

@@ -0,0 +1,143 @@
+#!/usr/bin/pulseaudio -nF
+#
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify it
+# under the terms of the GNU Lesser General Public License as published by
+# the Free Software Foundation; either version 2 of the License, or
+# (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+# This startup script is used only if PulseAudio is started per-user
+# (i.e. not in system mode)
+
+.fail
+
+### Automatically restore the volume of streams and devices
+load-module module-device-restore
+load-module module-stream-restore
+load-module module-card-restore
+
+### Automatically augment property information from .desktop files
+### stored in /usr/share/application
+load-module module-augment-properties
+
+load-module module-switch-on-connect blacklist=""
+### Should be after module-*-restore but before module-*-detect
+load-module module-switch-on-port-available
+
+### Load audio drivers statically
+### (it's probably better to not load these drivers manually, but instead
+### use module-udev-detect -- see below -- for doing this automatically)
+#load-module module-alsa-sink
+#load-module module-alsa-source device=hw:1,0
+#load-module module-oss device="/dev/dsp" sink_name=output source_name=input
+#load-module module-oss-mmap device="/dev/dsp" sink_name=output source_name=input
+#load-module module-null-sink
+#load-module module-pipe-sink
+
+### Automatically load driver modules depending on the hardware available
+.ifexists module-udev-detect.so
+load-module module-udev-detect
+.else
+### Use the static hardware detection module (for systems that lack udev support)
+load-module module-detect
+.endif
+
+### Automatically connect sink and source if JACK server is present
+.ifexists module-jackdbus-detect.so
+.nofail
+load-module module-jackdbus-detect channels=2
+.fail
+.endif
+
+### Automatically load driver modules for Bluetooth hardware
+.ifexists module-bluetooth-policy.so
+load-module module-bluetooth-policy
+.endif
+
+.ifexists module-bluetooth-discover.so
+load-module module-bluetooth-discover
+.endif
+
+### Load several protocols
+.ifexists module-esound-protocol-unix.so
+load-module module-esound-protocol-unix
+.endif
+load-module module-native-protocol-unix auth-anonymous=1 socket=/tmp/pulse-socket
+
+### Network access (may be configured with paprefs, so leave this commented
+### here if you plan to use paprefs)
+#load-module module-esound-protocol-tcp
+#load-module module-native-protocol-tcp
+#load-module module-zeroconf-publish
+
+### Load the RTP receiver module (also configured via paprefs, see above)
+#load-module module-rtp-recv
+
+### Load the RTP sender module (also configured via paprefs, see above)
+#load-module module-null-sink sink_name=rtp format=s16be channels=2 rate=44100 sink_properties="device.description='RTP Multicast Sink'"
+#load-module module-rtp-send source=rtp.monitor
+
+### Load additional modules from GSettings. This can be configured with the paprefs tool.
+### Please keep in mind that the modules configured by paprefs might conflict with manually
+### loaded modules.
+.ifexists module-gsettings.so
+.nofail
+load-module module-gsettings
+.fail
+.endif
+
+
+### Automatically restore the default sink/source when changed by the user
+### during runtime
+### NOTE: This should be loaded as early as possible so that subsequent modules
+### that look up the default sink/source get the right value
+load-module module-default-device-restore
+
+### Automatically move streams to the default sink if the sink they are
+### connected to dies, similar for sources
+load-module module-rescue-streams
+
+### Make sure we always have a sink around, even if it is a null sink.
+load-module module-always-sink
+
+### Honour intended role device property
+load-module module-intended-roles
+
+### Automatically suspend sinks/sources that become idle for too long
+load-module module-suspend-on-idle
+
+### If autoexit on idle is enabled we want to make sure we only quit
+### when no local session needs us anymore.
+.ifexists module-console-kit.so
+load-module module-console-kit
+.endif
+.ifexists module-systemd-login.so
+load-module module-systemd-login
+.endif
+
+### Enable positioned event sounds
+load-module module-position-event-sounds
+
+### Cork music/video streams when a phone stream is active
+load-module module-role-cork
+
+### Modules to allow autoloading of filters (such as echo cancellation)
+### on demand. module-filter-heuristics tries to determine what filters
+### make sense, and module-filter-apply does the heavy-lifting of
+### loading modules and rerouting streams.
+load-module module-filter-heuristics
+load-module module-filter-apply
+
+### Make some devices default
+#set-default-sink output
+set-default-source alsa_input.platform-es8388-sound.HiFi__hw_rockchipes8388__source
+set-default-sink alsa_output.platform-es8388-sound.HiFi__hw_rockchipes8388__sink

external/packages/bsp/rk356x/etc/udev/rules.d/60-drm.rules

@@ -0,0 +1 @@
+SUBSYSTEM=="drm", ACTION=="change", ENV{HOTPLUG}=="1", RUN+="/sbin/start-stop-daemon -Sbox /usr/local/bin/drm-hotplug.sh"

external/packages/bsp/rk356x/etc/udev/rules.d/83-typec.rules

@@ -0,0 +1 @@
+ACTION=="remove", SUBSYSTEM=="typec", RUN+="/usr/local/bin/typec_usb2.sh"

external/packages/bsp/rk356x/etc/udev/rules.d/88-rockchip-camera.rules

@@ -0,0 +1 @@
+ACTION=="add", SUBSYSTEM=="video4linux", ENV{ID_V4L_PRODUCT}=="*_mainpath", SYMLINK+="video-camera0"

external/packages/bsp/rk356x/etc/udev/rules.d/90-pulseaudio-rockchip.rules

@@ -0,0 +1,61 @@
+# do not edit this file, it will be overwritten on update
+
+# This file is part of PulseAudio.
+#
+# PulseAudio is free software; you can redistribute it and/or modify
+# it under the terms of the GNU Lesser General Public License as
+# published by the Free Software Foundation; either version 2.1 of the
+# License, or (at your option) any later version.
+#
+# PulseAudio is distributed in the hope that it will be useful, but
+# WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+# Lesser General Public License for more details.
+#
+# You should have received a copy of the GNU Lesser General Public License
+# along with PulseAudio; if not, see <http://www.gnu.org/licenses/>.
+
+SUBSYSTEM!="sound", GOTO="pulseaudio_end"
+ACTION!="change", GOTO="pulseaudio_end"
+KERNEL!="card*", GOTO="pulseaudio_end"
+SUBSYSTEMS=="usb", GOTO="pulseaudio_check_usb"
+
+#ATTRS{id}=="rockchiphdmi0", ACTION=="change", ENV{PULSE_PROFILE_SET}="pulse-rockchip-hdmi0.conf"
+#ATTRS{id}=="rockchiphdmi1", ACTION=="change", ENV{PULSE_PROFILE_SET}="pulse-rockchip-hdmi1.conf"
+#ATTRS{id}=="rockchiprk168hd", ACTION=="change", ENV{PULSE_PROFILE_SET}="pulse-rockchip.conf"
+#ATTRS{id}=="ROCKCHIPSPDIF", ACTION=="change", ENV{PULSE_PROFILE_SET}="pulse-rockchip.conf"
+SUBSYSTEMS=="platform", DRIVERS=="thinkpad_acpi", ENV{PULSE_IGNORE}="1"
+
+GOTO="pulseaudio_end"
+
+LABEL="pulseaudio_check_usb"
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1978", ENV{PULSE_PROFILE_SET}="native-instruments-audio8dj.conf"
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="0839", ENV{PULSE_PROFILE_SET}="native-instruments-audio4dj.conf"
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="baff", ENV{PULSE_PROFILE_SET}="native-instruments-traktorkontrol-s4.conf"
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="4711", ENV{PULSE_PROFILE_SET}="native-instruments-korecontroller.conf"
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="041d", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio2.conf"
+
+# There appear to be two IDs in use for Traktor Audio 6 (or maybe 17cc:1011
+# is just incorrect - 17cc:1010 has been verified to be correct at least
+# for some hardware).
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1010", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1011", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio6.conf"
+
+ATTRS{idVendor}=="17cc", ATTRS{idProduct}=="1021", ENV{PULSE_PROFILE_SET}="native-instruments-traktor-audio10.conf"
+ATTRS{idVendor}=="0763", ATTRS{idProduct}=="2012", ENV{PULSE_PROFILE_SET}="maudio-fasttrack-pro.conf"
+ATTRS{idVendor}=="045e", ATTRS{idProduct}=="02bb", ENV{PULSE_PROFILE_SET}="kinect-audio.conf"
+ATTRS{idVendor}=="041e", ATTRS{idProduct}=="322c", ENV{PULSE_PROFILE_SET}="sb-omni-surround-5.1.conf"
+ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="4014", ENV{PULSE_PROFILE_SET}="dell-dock-tb16-usb-audio.conf"
+ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1260", ENV{PULSE_PROFILE_SET}="steelseries-arctis-usb-audio.conf"
+
+# ID 1038:12ad is for the 2018 refresh of the Arctis 7.
+# ID 1038:1294 is for Arctis Pro Wireless (which works with the Arctis 7
+# configuration).
+ATTRS{idVendor}=="1038", ATTRS{idProduct}=="12ad", ENV{PULSE_PROFILE_SET}="steelseries-arctis-usb-audio.conf"
+ATTRS{idVendor}=="1038", ATTRS{idProduct}=="1294", ENV{PULSE_PROFILE_SET}="steelseries-arctis-usb-audio.conf"
+
+ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="4987", ENV{PULSE_PROFILE_SET}="st2557-pc-usb-audio.conf"
+# Sugon W330-H35A
+ATTRS{idVendor}=="0bda", ATTRS{idProduct}=="491b", ENV{PULSE_PROFILE_SET}="22d4-us-usb-audio.conf"
+
+LABEL="pulseaudio_end"

external/packages/bsp/rk356x/etc/udev/rules.d/99-rockchip-permissions.rules

@@ -0,0 +1,20 @@
+ACTION=="remove", GOTO="permissions_end"
+
+# VPU devices
+KERNEL=="avsd", MODE="0660", GROUP="video"
+KERNEL=="vepu", MODE="0660", GROUP="video"
+KERNEL=="h265e", MODE="0660", GROUP="video"
+KERNEL=="rkvdec", MODE="0660", GROUP="video"
+KERNEL=="rkvenc", MODE="0660", GROUP="video"
+KERNEL=="mpp_service", MODE="0660", GROUP="video"
+KERNEL=="vpu[_-]service", MODE="0660", GROUP="video"
+KERNEL=="hevc[_-]service", MODE="0660", GROUP="video"
+
+# RGA device
+KERNEL=="rga", MODE="0660", GROUP="video"
+
+# MALI devices (/dev/mali for mali400)
+KERNEL=="mali*", MODE="0660", GROUP="video"
+
+LABEL="permissions_end"
+