commit b051ffa2ae upstream.
Lockdep reported that, as steam_do_deck_input_event is called from
steam_raw_event inside of an IRQ context, it can lead to issues if that IRQ
occurs while the work to be cancelled is running. By using cancel_delayed_work,
this issue can be avoided. The exact ordering of the work and the event
processing is not super important, so this is safe.
Fixes: cd438e57dd ("HID: hid-steam: Add gamepad-only mode switched to by holding options")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 79504249d7 ]
Due to an interplay between locking in the input and hid transport subsystems,
attempting to register or deregister the relevant input devices during the
hidraw open/close events can lead to a lock ordering issue. Though this
shouldn't cause a deadlock, this commit moves the input device manipulation to
deferred work to sidestep the issue.
Fixes: 385a488677 ("HID: steam: remove input device when a hid client is running.")
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cc4f952427 ]
When a force feedback command is sent from userspace, work is scheduled to pass
this data to the controller without blocking userspace itself. However, in
theory, this work might not be properly canceled if the controller is removed
at the exact right time. This patch ensures the work is properly canceled when
the device is removed.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3347e1654f ]
The Deck's controller features an accelerometer and gyroscope which
send their measurement values by default in the main HID input report.
Expose both sensors to userspace through a separate evdev node as it
is done by the hid-nintendo and hid-playstation drivers.
Signed-off-by: Max Maisel <mmm-1@posteo.net>
Reviewed-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit a9f1da09c6 ]
There are a number of issues in this code. First of all if
steam_create_client_hid() fails then it leads to an error pointer
dereference when we call hid_destroy_device(steam->client_hdev).
Also there are a number of leaks. hid_hw_stop() is not called if
hid_hw_open() fails for example. And it doesn't call steam_unregister()
or hid_hw_close().
Fixes: 691ead124a ("HID: hid-steam: Clean up locking")
Signed-off-by: Dan Carpenter <dan.carpenter@linaro.org>
Reviewed-by: Vicki Pfau <vi@endrift.com>
Link: https://lore.kernel.org/r/1fd87904-dabf-4879-bb89-72d13ebfc91e@moroto.mountain
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit cd438e57dd ]
This commit adds a hotkey to switch between "gamepad" mode (mouse and keyboard
disabled) and "desktop" mode (gamepad disabled) by holding down the options
button (mapped here as the start button). This mirrors the behavior of the
official Steam client.
This also adds and uses a function for generating haptic pulses, as Steam also
does when engaging this hotkey.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4f9a5a9769 ]
SDL includes a list of settings (formerly called registers in this driver),
reports (formerly cmds), and various other identifiers that were provided by
Valve. This commit imports a significant chunk of that list as well as
replacing most of the guessed names and a handful of magic constants. It also
replaces bitmask definitions that used hex with the BIT macro.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 691ead124a ]
This cleans up the locking logic so that the spinlock is consistently used for
access to a small handful of struct variables, and the mutex is exclusively and
consistently used for ensuring that mutliple threads aren't trying to
send/receive reports at the same time. Previously, only some report
transactions were guarded by this mutex, potentially breaking atomicity. The
mutex has been renamed to reflect this usage.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 917972636e ]
The Steam Deck has a setting that controls whether or not the watchdog is
enabled, so instead of using a heartbeat to keep the watchdog from triggering,
this commit changes the behavior to simply disable the watchdog instead.
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 34281b4d91 ]
The original implementation of this driver incorrectly guessed the function of
this register. It's not only unnecessary to write to this register for lizard
mode but actually counter-productive since it overwrites whatever previous
value was intentionally set, for example by Steam.
Signed-off-by: Vicki Pfau <vi@endrift.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 79504249d7 ("HID: hid-steam: Move hidraw input (un)registering to work")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 0b43d98ff2 ]
Syzbot[1] has detected a stack-out-of-bounds read of the ep_addr array from
hid-thrustmaster driver. This array is passed to usb_check_int_endpoints
function from usb.c core driver, which executes a for loop that iterates
over the elements of the passed array. Not finding a null element at the end of
the array, it tries to read the next, non-existent element, crashing the kernel.
To fix this, a 0 element was added at the end of the array to break the for
loop.
[1] https://syzkaller.appspot.com/bug?extid=9c9179ac46169c56c1ad
Reported-by: syzbot+9c9179ac46169c56c1ad@syzkaller.appspotmail.com
Fixes: 50420d7c79 ("HID: hid-thrustmaster: Fix warning in thrustmaster_probe by adding endpoint check")
Signed-off-by: Túlio Fernandes <tuliomf09@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 9b8e2220d3 ]
devm_kasprintf() can return a NULL pointer on failure,but this
returned value in mt_input_configured() is not checked.
Add NULL check in mt_input_configured(), to handle kernel NULL
pointer dereference error.
Fixes: 4794394635 ("HID: multitouch: Correct devm device reference for hidinput input_dev name")
Signed-off-by: Charles Han <hanchunchao@inspur.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8a5b38c3fd upstream.
The hid-sensor-hub creates the individual device structs and transfers them
to the created mfd platform-devices via the platform_data in the mfd_cell.
Before e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
the sensor-hub was managing access centrally, with one "completion" in the
hub's data structure, which needed to be finished on removal at the latest.
The mentioned commit then moved this central management to each hid sensor
device, resulting on a completion in each struct hid_sensor_hub_device.
The remove procedure was adapted to go through all sensor devices and
finish any pending "completion".
What this didn't take into account was, platform_device_add_data() that is
used by mfd_add{_hotplug}_devices() does a kmemdup on the submitted
platform-data. So the data the platform-device gets is a copy of the
original data, meaning that the device worked on a different completion
than what sensor_hub_remove() currently wants to access.
To fix that, use device_for_each_child() to go through each child-device
similar to how mfd_remove_devices() unregisters the devices later and
with that get the live platform_data to finalize the correct completion.
Fixes: e651a1da44 ("HID: hid-sensor-hub: Allow parallel synchronous reads")
Cc: stable@vger.kernel.org
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Acked-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Acked-by: Jiri Kosina <jkosina@suse.com>
Link: https://lore.kernel.org/r/20241107114712.538976-2-heiko@sntech.de
Signed-off-by: Lee Jones <lee@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 80818fdc06 ]
The addition of the "System Do Not Disturb" event code caused the Generic
Desktop D-Pad configuration to be skipped. This commit allows both to be
configured without conflicting with each other.
Fixes: 22d6d060ac ("input: Add support for "Do Not Disturb"")
Signed-off-by: Terry Tritton <terry.tritton@linaro.org>
Reviewed-by: Aseda Aboagye <aaboagye@chromium.org>
Reviewed-by: Carlos Llamas <cmllamas@google.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 8ade5e05bd ]
Commit c8000deb68 ("HID: multitouch: Add support for GT7868Q") added
support for 0x01e8 and 0x01e9, but the mt_device[] entries were added
twice for 0x01e8 and there was none added for 0x01e9. Fix that.
Fixes: c8000deb68 ("HID: multitouch: Add support for GT7868Q")
Reported-by: He Lugang <helugang@uniontech.com>
Reported-by: WangYuli <wangyuli@uniontech.com>
Reported-by: Ulrich Müller <ulm@gentoo.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 64f2657b57 upstream.
A report in 2019 by the syzbot fuzzer was found to be connected to two
errors in the HID core associated with Resolution Multipliers. One of
the errors was fixed by commit ea427a222d ("HID: core: Fix deadloop
in hid_apply_multiplier."), but the other has not been fixed.
This error arises because hid_apply_multipler() assumes that every
Resolution Multiplier control is contained in a Logical Collection,
i.e., there's no way the routine can ever set multiplier_collection to
NULL. This is in spite of the fact that the function starts with a
big comment saying:
* "The Resolution Multiplier control must be contained in the same
* Logical Collection as the control(s) to which it is to be applied.
...
* If no Logical Collection is
* defined, the Resolution Multiplier is associated with all
* controls in the report."
* HID Usage Table, v1.12, Section 4.3.1, p30
*
* Thus, search from the current collection upwards until we find a
* logical collection...
The comment and the code overlook the possibility that none of the
collections found may be a Logical Collection.
The fix is to set the multiplier_collection pointer to NULL if the
collection found isn't a Logical Collection.
Reported-by: syzbot+ec5f884c4a135aa0dbb9@syzkaller.appspotmail.com
Closes: https://lore.kernel.org/all/000000000000109c040597dc5843@google.com/
Signed-off-by: Alan Stern <stern@rowland.harvard.edu>
Cc: Peter Hutterer <peter.hutterer@who-t.net>
Fixes: 5a4abb36f3 ("HID: core: process the Resolution Multiplier")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 3d88ba86ba upstream.
This reverts commit 251efae73b.
Quoting Wang Yuli:
"The 27C6:01E0 touchpad doesn't require the workaround and applying it
would actually break functionality.
The initial report came from a BBS forum, but we suspect the
information provided by the forum user may be incorrect which could
happen sometimes. [1]
Further investigation showed that the Lenovo Y9000P 2024 doesn't even
use a Goodix touchpad. [2]
For the broader issue of 27c6:01e0 being unusable on some devices, it
just need to address it with a libinput quirk.
In conclusion, we should revert this commit, which is the best
solution."
Reported-by: Ulrich Müller <ulm@gentoo.org>
Reported-by: WangYuli <wangyuli@uniontech.com>
Link: https://lore.kernel.org/all/uikt4wwpw@gentoo.org/
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 645c224ac5 ]
We already have the possibility to force not binding to hid-generic and
rely on a dedicated driver, but we couldn't do the other way around.
This is useful for BPF programs where we are fixing the report descriptor
and the events, but want to avoid a specialized driver to come after BPF
which would unwind everything that is done there.
Reviewed-by: Peter Hutterer <peter.hutterer@who-t.net>
Link: https://patch.msgid.link/20241001-hid-bpf-hid-generic-v3-8-2ef1019468df@kernel.org
Signed-off-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 49a397ad24 upstream.
The tilt data contained in the Bluetooth packets of an Intuos Pro are
supposed to be interpreted as signed values. Simply casting the values
to type `char` is not guaranteed to work since it is implementation-
defined whether it is signed or unsigned. At least one user has noticed
the data being reported incorrectly on their system. To ensure that the
data is interpreted properly, we specifically cast to `signed char`
instead.
Link: https://github.com/linuxwacom/input-wacom/issues/445
Fixes: 4922cd26f0 ("HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface")
CC: stable@vger.kernel.org # 4.11+
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 66ef47faa9 ]
It was found that unloading 'hid_hyperv' module results in a devres
complaint:
...
hv_vmbus: unregistering driver hid_hyperv
------------[ cut here ]------------
WARNING: CPU: 2 PID: 3983 at drivers/base/devres.c:691 devres_release_group+0x1f2/0x2c0
...
Call Trace:
<TASK>
? devres_release_group+0x1f2/0x2c0
? __warn+0xd1/0x1c0
? devres_release_group+0x1f2/0x2c0
? report_bug+0x32a/0x3c0
? handle_bug+0x53/0xa0
? exc_invalid_op+0x18/0x50
? asm_exc_invalid_op+0x1a/0x20
? devres_release_group+0x1f2/0x2c0
? devres_release_group+0x90/0x2c0
? rcu_is_watching+0x15/0xb0
? __pfx_devres_release_group+0x10/0x10
hid_device_remove+0xf5/0x220
device_release_driver_internal+0x371/0x540
? klist_put+0xf3/0x170
bus_remove_device+0x1f1/0x3f0
device_del+0x33f/0x8c0
? __pfx_device_del+0x10/0x10
? cleanup_srcu_struct+0x337/0x500
hid_destroy_device+0xc8/0x130
mousevsc_remove+0xd2/0x1d0 [hid_hyperv]
device_release_driver_internal+0x371/0x540
driver_detach+0xc5/0x180
bus_remove_driver+0x11e/0x2a0
? __mutex_unlock_slowpath+0x160/0x5e0
vmbus_driver_unregister+0x62/0x2b0 [hv_vmbus]
...
And the issue seems to be that the corresponding devres group is not
allocated. Normally, devres_open_group() is called from
__hid_device_probe() but Hyper-V HID driver overrides 'hid_dev->driver'
with 'mousevsc_hid_driver' stub and basically re-implements
__hid_device_probe() by calling hid_parse() and hid_hw_start() but not
devres_open_group(). hid_device_probe() does not call __hid_device_probe()
for it. Later, when the driver is removed, hid_device_remove() calls
devres_release_group() as it doesn't check whether hdev->driver was
initially overridden or not.
The issue seems to be related to the commit 62c68e7cee ("HID: ensure
timely release of driver-allocated resources") but the commit itself seems
to be correct.
Fix the issue by dropping the 'hid_dev->driver' override and using
hid_register_driver()/hid_unregister_driver() instead. Alternatively, it
would have been possible to rely on the default handling but
HID_CONNECT_DEFAULT implies HID_CONNECT_HIDRAW and it doesn't seem to work
for mousevsc as-is.
Fixes: 62c68e7cee ("HID: ensure timely release of driver-allocated resources")
Suggested-by: Michael Kelley <mhklinux@outlook.com>
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Reviewed-by: Michael Kelley <mhklinux@outlook.com>
Tested-by: Saurabh Sengar <ssengar@linux.microsoft.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 526748b925 ]
The Logitech Casa Touchpad does not reliably send touch release signals
when communicating through the Logitech Bolt wireless-to-USB receiver.
Adjusting the device class to add MT_QUIRK_NOT_SEEN_MEANS_UP to make
sure that no touches become stuck, MT_QUIRK_FORCE_MULTI_INPUT is not
needed, but harmless.
Linux does not have information on which devices are connected to the
Bolt receiver, so we have to enable this for the entire device.
Signed-off-by: Kenneth Albanowski <kenalba@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7a5ab80711 ]
The behavior of HONOR MagicBook Art 14 touchpad is not consistent
after reboots, as sometimes it reports itself as a touchpad, and
sometimes as a mouse.
Similarly to GLO-GXXX it is possible to call MT_QUIRK_FORCE_GET_FEATURE as a
workaround to force set feature in mt_set_input_mode() for such special touchpad
device.
[jkosina@suse.com: reword changelog a little bit]
Link: https://gitlab.freedesktop.org/libinput/libinput/-/issues/1040
Signed-off-by: Wentao Guan <guanwentao@uniontech.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Reviewed-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a5cbb526e ]
By default the track point does not work on the Asus Expertbook B2402FVA.
From libinput record i got the ID of the track point device:
evdev:
# Name: ASUE1201:00 04F3:32AE
# ID: bus 0x18 vendor 0x4f3 product 0x32ae version 0x100
I found that the track point is functional, when i set the
MT_CLS_WIN_8_FORCE_MULTI_INPUT_NSMU class for the reported device.
Signed-off-by: Stefan Blum <stefan.blum@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 177f25d129 ]
Since the report buffer is used by all kinds of drivers in various ways, let's
zero-initialize it during allocation to make sure that it can't be ever used
to leak kernel memory via specially-crafted report.
Fixes: 27ce405039 ("HID: fix data access in implement()")
Reported-by: Benoît Sevens <bsevens@google.com>
Acked-by: Benjamin Tissoires <bentiss@kernel.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 87b6962090 upstream.
Some Plantronics headset as the below send an unexcept opposite
volume key's HID report for each volume key press after 200ms, like
unecepted Volume Up Key following Volume Down key pressed by user.
This patch adds a quirk to hid-plantronics for these devices, which
will ignore the second unexcepted opposite volume key if it happens
within 220ms from the last one that was handled.
Plantronics EncorePro 500 Series (047f:431e)
Plantronics Blackwire_3325 Series (047f:430c)
The patch was tested on the mentioned model, it shouldn't affect
other models, however, this quirk might be needed for them too.
Auto-repeat (when a key is held pressed) is not affected per test
result.
Cc: stable@vger.kernel.org
Signed-off-by: Wade Wang <wade.wang@hp.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 251efae73b upstream.
The 2024 Lenovo Y9000P which use GT7868Q chip also needs a fixup.
The information of the chip is as follows:
I2C HID v1.00 Mouse [GXTP5100:00 27C6:01E0]
Signed-off-by: He Lugang <helugang@uniontech.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit d1aa95e86f ]
The new ASUS ROG Ally X functions almost exactly the same as the previous
model, so we can use the same quirks.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit e901f10adb ]
Add init of the lightbar which is a small panel on the back of the ASUS
ROG Z13 and uses the same MCU as keyboards.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 08b50c6b0b ]
A handful of buttons on the ROG Ally are not actually part of the xpad
device and are instead keyboard keys (a typical use of the MCU that asus
uses). We attach a group of F<num> key codes which aren't used much and
which the handheld community has already accepted as defaults here.
Signed-off-by: Luke D. Jones <luke@ljones.dev>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 26dd6a5667 ]
There's a Cirque touchpad that wakes system up without anything touched
the touchpad. The input report is empty when this happens.
The reason is stated in HID over I2C spec, 7.2.8.2:
"If the DEVICE wishes to wake the HOST from its low power state, it can
issue a wake by asserting the interrupt."
This is fine if OS can put system back to suspend by identifying input
wakeup count stays the same on resume, like Chrome OS Dark Resume [0].
But for regular distro such policy is lacking.
Though the change doesn't bring any impact on power consumption for
touchpad is minimal, other i2c-hid device may depends on SLEEP control
power. So use a quirk to limit the change scope.
[0] https://chromium.googlesource.com/chromiumos/platform2/+/HEAD/power_manager/docs/dark_resume.md
Signed-off-by: Kai-Heng Feng <kai.heng.feng@canonical.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7d7a252842 ]
The quirks variable and the I2C_HID_QUIRK_ defines are never used /
exported outside of the i2c-hid code renumber them to start at
BIT(0) again.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 26dd6a5667 ("HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bd008acdac ]
Re-trying the power-on command on failure on all devices should
not be a problem, drop the I2C_HID_QUIRK_SET_PWR_WAKEUP_DEV quirk
and simply retry power-on on all devices.
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Stable-dep-of: 26dd6a5667 ("HID: i2c-hid: Skip SET_POWER SLEEP for Cirque touchpad on system suspend")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 740329d712 ]
Added a gpiochip compatible driver to control the 8 GPIOs of
the MCP2200 by using the HID interface.
Using GPIOs with alternative functions (GP0<->SSPND, GP1<->USBCFG,
GP6<->RXLED, GP7<->TXLED) will reset the functions, if set (unset by
default).
The driver was tested while also using the UART of the chip. Setting
and reading the GPIOs has no effect on the UART communication. However,
a reset is triggered after the CONFIGURE command. If the GPIO Direction
is constantly changed, this will affect the communication at low baud
rates. This is a hardware problem of the MCP2200 and is not caused by
the driver.
Signed-off-by: Johannes Roith <johannes@gnu-linux.rocks>
Reviewed-by: Rahul Rameshbabu <sergeantsagara@protonmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 65b72ea91a ]
This applies similar quirks used by previous generation device, so that
Trackpoint and buttons on the touchpad works. New USB KBD PID 0x61AE for
Thinkpad X12 Tab is added.
Signed-off-by: Vishnu Sankar <vishnuocv@gmail.com>
Reviewed-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit bcc31692a1 ]
Before this change there were 16 vid:pid based quirks to ignore the battery
reported by Elan I2C-HID touchscreens on various Asus and HP laptops.
And a report has been received that the 04F3:2A00 I2C touchscreen on
the HP ProBook x360 11 G5 EE/86CF also reports a non present battery.
Since I2C-HID devices are always builtin to laptops they are not battery
owered so it should be safe to just ignore the battery on all Elan I2C-HID
devices, rather then adding a 17th quirk for the 04F3:2A00 touchscreen.
As reported in the changelog of commit a3a5a37efb ("HID: Ignore battery
for ELAN touchscreens 2F2C and 4116"), which added 2 new Elan touchscreen
quirks about a month ago, the HID reported battery seems to be related
to a stylus being used. But even when a stylus is in use it does not
properly report the charge of the stylus battery, instead the reported
battery charge jumps from 0% to 1%. So it is best to just ignore the
HID battery.
Closes: https://bugzilla.redhat.com/show_bug.cgi?id=2302776
Cc: Louis Dalibard <ontake@ontake.dev>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 84aecf2d25 ]
The driver currently assumes that the first sequence number it will see
is going to be 0. This is not a realiable assumption and can break if,
for example, the tablet has already been running for some time prior to
the kernel driver connecting to the device. This commit initializes the
expected sequence number to -1 and will only print the "Dropped" warning
the it has been updated to a non-negative value.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 359673ea3a ]
The current dropped packet reporting assumes that all sequence numbers
are 16 bits in length. This results in misleading "Dropped" messages if
the hardware uses fewer bits. For example, if a tablet uses only 8 bits
to store its sequence number, once it rolls over from 255 -> 0, the
driver will still be expecting a packet "256". This patch adjusts the
logic to reset the next expected packet to logical_minimum whenever
it overflows beyond logical_maximum.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Tested-by: Joshua Dickens <joshua.dickens@wacom.com>
Fixes: 6d09085b38 ("HID: wacom: Adding Support for new usages")
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c8000deb68 ]
GT7868Q has incorrect data in the report and needs a fixup.
The change enables haptic touchpad on Lenovo ThinkBook 13x Gen 4
and has been tested on the device.
Signed-off-by: Dmitry Savin <envelsavinds@gmail.com>
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 1b8f9c1fb4 upstream.
The Wacom driver maps the HID_DG_TWIST usage to ABS_Z (rather than ABS_RZ)
for historic reasons. When the code to support twist was introduced in
commit 50066a042d ("HID: wacom: generic: Add support for height, tilt,
and twist usages"), we were careful to write it in such a way that it had
HID calculate the resolution of the twist axis assuming ABS_RZ instead
(so that we would get correct angular behavior). This was broken with
the introduction of commit 08a46b4190 ("HID: wacom: Set a default
resolution for older tablets"), which moved the resolution calculation
to occur *before* the adjustment from ABS_Z to ABS_RZ occurred.
This commit moves the calculation of resolution after the point that
we are finished setting things up for its proper use.
Signed-off-by: Jason Gerecke <jason.gerecke@wacom.com>
Fixes: 08a46b4190 ("HID: wacom: Set a default resolution for older tablets")
Cc: stable@vger.kernel.org
Signed-off-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
