commit 805ce81826 upstream.
In the current setup the PA is left unmuted even when the
Soundwire ports are not started streaming. This can lead to click
and pop sounds during start.
There is a same issue in the reverse order where in the PA is
left unmute even after the data stream is stopped, the time
between data stream stopping and port closing is long enough
to accumulate DC on the line resulting in Click/Pop noise
during end of stream.
making use of new mute_unmute_on_trigger flag is helping a
lot with this Click/Pop issues reported on this Codec
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Tested-by: Johan Hovold <johan+linaro@kernel.org>
Link: https://lore.kernel.org/r/20231027105747.32450-3-srinivas.kandagatla@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Johan Hovold <johan+linaro@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 2cb5478839 ]
The Lenovo Yoga Tab 3 Pro YT3-X90 x86 tablet, which ships with Android with
a custom kernel as factory OS, does not list the used WM5102 codec inside
its DSDT.
Workaround this with a new snd_soc_acpi_intel_baytrail_machines[] entry
which matches on the SST id instead of the codec id like nocodec does,
combined with using a machine_quirk callback which returns NULL on
other machines to skip the new entry on other machines.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20231021211534.114991-1-hdegoede@redhat.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 1a1c3d794e ]
If the driver properties do not define a cirrus,firmware-uid try to get the
PCI SSID as the UID.
On PCI-based systems the PCI SSID is used to uniquely identify the specific
sound hardware. This is the standard mechanism for x86 systems and is the
way to get a unique system identifier for systems that use the CS35L56 on
SoundWire.
For non-SoundWire systems there is no Windows equivalent of the ASoC driver
in I2C/SPI mode. These would be:
1. HDA systems, which are handled by the HDA subsystem.
2. Linux-specific systems.
3. Composite devices where the cs35l56 is not present in ACPI and is
configured using software nodes.
Case 2 can use the firmware-uid property, though the PCI SSID is supported
as an alternative, as it is the standard PCI mechanism.
Case 3 is a SoundWire system where some other codec is the SoundWire bridge
device and CS35L56 is not listed in ACPI. As these are SoundWire systems
they will normally use the PCI SSID.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit ba2de401d3 ]
Pass the PCI SSID of the audio interface through to the machine driver.
This allows the machine driver to use the SSID to uniquely identify the
specific hardware configuration and apply any platform-specific
configuration.
struct snd_sof_pdata is passed around inside the SOF code, but it then
passes configuration information to the machine driver through
struct snd_soc_acpi_mach and struct snd_soc_acpi_mach_params. So SSID
information has been added to both snd_sof_pdata and
snd_soc_acpi_mach_params.
PCI does not define 0x0000 as an invalid value so we can't use zero to
indicate that the struct member was not written. Instead a flag is
included to indicate that a value has been written to the
subsystem_vendor and subsystem_device members.
sof_pci_probe() creates the struct snd_sof_pdata. It is passed a struct
pci_dev so it can fill in the SSID value.
sof_machine_check() finds the appropriate struct snd_soc_acpi_mach. It
copies the SSID information across to the struct snd_soc_acpi_mach_params.
This done before calling any custom set_mach_params() so that it could be
used by the set_mach_params() callback to apply variant params.
The machine driver receives the struct snd_soc_acpi_mach as its
platform_data.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Reviewed-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20230912163207.3498161-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 15be353d55 ]
The HDMI hotplug callback to the hdmi-codec is currently registered when
jack is set.
The hotplug not only serves to report the ASoC jack state but also to get
the ELD. It should be registered when the component probes instead, so it
does not depend on the card driver registering a jack for the HDMI to
properly report the ELD.
Fixes: 25ce4f2b35 ("ASoC: hdmi-codec: Get ELD in before reporting plugged event")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Link: https://lore.kernel.org/r/20231106104013.704356-1-jbrunet@baylibre.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 28809aaeab ]
When adding CODECs to a DAI link, the code should stop processing more
CODECs when the expected number of CODECs are discovered. This fixes a
small corner case issue introduced when support for different devices
on the same SoundWire link was added. In the case of aggregated
devices everything is fine, as all devices intended for the DAI link
will be marked with the same group and any not intended for that DAI
are skipped by the group check. However for non-aggregated devices the
group check is bypassed and the current code does not stop after it
has found the first device. Meaning if additional non-aggregated devices
are present on the same SoundWire link they will be erroneously added
into the DAI link.
Fix this issue, and provide a small optimisation by ceasing to process
devices once we have reached the required number of devices for the
current DAI link.
Fixes: 317dcdecaf ("ASoC: intel: sof_sdw: Allow different devices on the same link")
Signed-off-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Link: https://lore.kernel.org/r/20231019173411.166759-2-pierre-louis.bossart@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3746284c23 ]
If, for any reason, the open-coded arithmetic causes a wraparound,
the protection that `struct_size()` adds against potential integer
overflows is defeated. Fix this by hardening call to `struct_size()`
with `size_add()`.
Fixes: f9efae9549 ("ASoC: SOF: ipc4-topology: Add support for base config extension")
Signed-off-by: "Gustavo A. R. Silva" <gustavoars@kernel.org>
Reviewed-by: Kees Cook <keescook@chromium.org>
Link: https://lore.kernel.org/r/ZQSr15AYJpDpipg6@work
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3efcb471f8 ]
The commit 1da681e528 ("ASoC: soc-pcm.c: Clear DAIs parameters after
stream_active is updated") tries to make sure DAI parameters can be
cleared properly through moving the cleanup to the place where stream
active status is updated. However, it will cause the cleanup only
happening in soc_pcm_close().
Suppose a case: aplay -Dhw:0 44100.wav 48000.wav. The case calls
soc_pcm_open()->soc_pcm_hw_params()->soc_pcm_hw_free()->
soc_pcm_hw_params()->soc_pcm_hw_free()->soc_pcm_close() in order. The
parameters would be remained in the system even if the playback of
44100.wav is finished.
The case requires us clearing parameters in phase of soc_pcm_hw_free().
However, moving the DAI parameters cleanup back to soc_pcm_hw_free()
has the risk that DAIs parameters never be cleared if there're more
than one stream, see commit 1da681e528 ("ASoC: soc-pcm.c: Clear DAIs
parameters after stream_active is updated") for more details.
To meet all these requirements, in addition to do DAI parameters
cleanup in soc_pcm_hw_free(), also check it in soc_pcm_close() to make
sure DAI parameters cleared if the DAI becomes inactive.
Fixes: 1da681e528 ("ASoC: soc-pcm.c: Clear DAIs parameters after stream_active is updated")
Signed-off-by: Chancel Liu <chancel.liu@nxp.com>
Link: https://lore.kernel.org/r/20230920153621.711373-2-chancel.liu@nxp.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 2d5661e600 ]
According to the documentation, drivers are responsible for undoing at
removal time all runtime PM changes done during probing.
Hence, add the missing calls to pm_runtime_dont_use_autosuspend(), which
are necessary for undoing pm_runtime_use_autosuspend().
Note this would have been handled implicitly by
devm_pm_runtime_enable(), but there is a need to continue using
pm_runtime_enable()/pm_runtime_disable() in order to ensure the runtime
PM is disabled as soon as the remove() callback is entered.
Fixes: f517ba4924 ("ASoC: cs35l41: Add support for hibernate memory retention mode")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-7-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 77bf613f0b ]
Enabling the active/passive shared boosts requires setting SYNC_EN, but
*not* before receiving the PLL Lock signal.
Due to improper error handling, it was not obvious that waiting for the
completion operation times out and, consequently, the shared boost is
never activated.
Further investigations revealed the signal is triggered while
snd_pcm_start() is executed, right after receiving the
SNDRV_PCM_TRIGGER_START command, which happens long after the
SND_SOC_DAPM_PRE_PMU event handler is invoked as part of
snd_pcm_prepare(). That is where cs35l41_global_enable() is called
from.
Increasing the wait duration doesn't help, as it only causes an
unnecessary delay in the invocation of snd_pcm_start(). Moving the wait
and the subsequent regmap operations to the SNDRV_PCM_TRIGGER_START
callback is not a solution either, since they would be executed in an
IRQ-off atomic context.
Solve the issue by setting the SYNC_EN bit in PWR_CTRL3 register right
after receiving the PLL Lock interrupt.
Additionally, drop the unnecessary writes to PWR_CTRL1 register, part of
the original mdsync_up_seq, which would have toggled GLOBAL_EN with
unwanted consequences on PLL locking behavior.
Fixes: f503056493 ("ALSA: cs35l41: Add shared boost feature")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Reviewed-by: David Rhodes <david.rhodes@cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-5-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 4bb5870ab6 ]
The return code of regmap_multi_reg_write() call related to "MDSYNC up"
sequence is shadowed by the subsequent regmap_read_poll_timeout()
invocation, which will hit a timeout in case the write operation above
fails.
Make sure cs35l41_global_enable() returns the correct error code instead
of -ETIMEDOUT.
Additionally, to be able to distinguish between the timeouts of
wait_for_completion_timeout() and regmap_read_poll_timeout(), print an
error message for the former and return immediately. This also avoids
having to wait unnecessarily for the second time.
Fixes: f8264c7592 ("ALSA: cs35l41: Poll for Power Up/Down rather than waiting a fixed delay")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Acked-by: Charles Keepax <ckeepax@opensource.cirrus.com>
Reviewed-by: Takashi Iwai <tiwai@suse.de>
Link: https://lore.kernel.org/r/20230907171010.1447274-3-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
Pull sound fixes from Takashi Iwai:
"Still higher volume than wished, but all are driver-specific small
fixes and look safe for this late RC.
The majority of changes are for ASoC, especially for wcd938x driver
and Cirrus codec drivers, while there are other random fixes including
usual HD-audio quirks"
* tag 'sound-6.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (22 commits)
ASoC: da7219: Correct the process of setting up Gnd switch in AAD
ALSA: hda/realtek - Fixed ASUS platform headset Mic issue
ALSA: hda/realtek: Add quirk for ASUS ROG GU603ZV
ALSA: hda/relatek: Enable Mute LED on HP Laptop 15s-fq5xxx
ASoC: dwc: Fix non-DT instantiation
ASoC: codecs: tas2780: Fix log of failed reset via I2C.
ASoC: rt5650: fix the wrong result of key button
ASoC: cs42l42: Fix missing include of gpio/consumer.h
ASoC: cs42l43: Update values for bias sense
ASoC: dt-bindings: cirrus,cs42l43: Update values for bias sense
ASoC: cs35l56: ASP1 DOUT must default to Hi-Z when not transmitting
ASoC: pxa: fix a memory leak in probe()
ASoC: cs35l56: Fix illegal use of init_completion()
ASoC: codecs: wcd938x-sdw: fix runtime PM imbalance on probe errors
ASoC: codecs: wcd938x-sdw: fix use after free on driver unbind
ASoC: codecs: wcd938x: fix runtime PM imbalance on remove
ASoC: codecs: wcd938x: fix regulator leaks on probe errors
ASoC: codecs: wcd938x: fix resource leaks on bind errors
ASoC: codecs: wcd938x: fix unbind tear down order
ASoC: codecs: wcd938x: drop bogus bind error handling
...
ASoC: Fixes for v6.6
A fairly large set of fixes here but all driver specific, the biggest
block is Johan's work shaking out issues with device setup and teardown
for the wcd938x driver which is a relatively large but clearly broken
down set of changes.
There is one core helper function added as part of a fix for wsa-macro.
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty/serial driver fixes for 6.6-rc6 that resolve
some reported issues. Included in here are:
- serial core pm runtime fix for issue reported by many
- 8250_omap driver fix
- rs485 spinlock fix for reported problem
- ams-delta bugfix for previous tty api changes in -rc1 that missed
this driver that never seems to get built in any test systems
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.6-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
ASoC: ti: ams-delta: Fix cx81801_receive() argument types
serial: core: Fix checks for tx runtime PM state
serial: 8250_omap: Fix errors with no_console_suspend
serial: Reduce spinlocked portion of uart_rs485_config()
The call to gpiod_set_value_cansleep() in cs42l42_sdw_update_status()
needs the header file gpio/consumer.h to be included.
This was introduced by commit 2d066c6a78 ("ASoC: cs42l42: Avoid stale
SoundWire ATTACH after hard reset")
and caused error:
sound/soc/codecs/cs42l42-sdw.c:374:4: error: implicit declaration of
function ‘gpiod_set_value_cansleep’;
did you mean gpio_set_value_cansleep’?
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: 2d066c6a78 ("ASoC: cs42l42: Avoid stale SoundWire ATTACH after hard reset")
Link: https://lore.kernel.org/r/20231011134853.20059-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
