[ Upstream commit d413eabff1 ]
The NT ACL format for an SMB3 POSIX Extensions chmod() is a single ACE with the
magic S-1-5-88-3-mode SID:
NT Security Descriptor
Revision: 1
Type: 0x8004, Self Relative, DACL Present
Offset to owner SID: 56
Offset to group SID: 124
Offset to SACL: 0
Offset to DACL: 20
Owner: S-1-5-21-3177838999-3893657415-1037673384-1000
Group: S-1-22-2-1000
NT User (DACL) ACL
Revision: NT4 (2)
Size: 36
Num ACEs: 1
NT ACE: S-1-5-88-3-438, flags 0x00, Access Allowed, mask 0x00000000
Type: Access Allowed
NT ACE Flags: 0x00
Size: 28
Access required: 0x00000000
SID: S-1-5-88-3-438
Owner and Group should be NULL, but the server is not required to fail the
request if they are present.
Signed-off-by: Ralph Boehme <slow@samba.org>
Cc: stable@vger.kernel.org
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 09bedafc1e ]
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_ace/struct smb_ace/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: d413eabff1 ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 251b93ae73 ]
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_acl/struct smb_acl/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: d413eabff1 ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7f599d8fb3 ]
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_sid/struct smb_sid/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: d413eabff1 ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 3651487607 ]
Preparation for moving acl definitions to new common header file.
Use the following shell command to rename:
find fs/smb/client -type f -exec sed -i \
's/struct cifs_ntsd/struct smb_ntsd/g' {} +
Signed-off-by: ChenXiaoSong <chenxiaosong@kylinos.cn>
Reviewed-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: d413eabff1 ("fs/smb/client: implement chmod() for SMB3 POSIX Extensions")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit fca432e73d upstream.
The following sysfs entries are reading super block member directly,
which can have a different endian and cause wrong values:
- sys/fs/btrfs/<uuid>/nodesize
- sys/fs/btrfs/<uuid>/sectorsize
- sys/fs/btrfs/<uuid>/clone_alignment
Thankfully those values (nodesize and sectorsize) are always aligned
inside the btrfs_super_block, so it won't trigger unaligned read errors,
just endian problems.
Fix them by using the native cached members instead.
Fixes: df93589a17 ("btrfs: export more from FS_INFO to sysfs")
CC: stable@vger.kernel.org
Reviewed-by: Naohiro Aota <naohiro.aota@wdc.com>
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2c8507c63f upstream.
During swap activation we iterate over the extents of a file and we can
have many thousands of them, so we can end up in a busy loop monopolizing
a core. Avoid this by doing a voluntary reschedule after processing each
extent.
CC: stable@vger.kernel.org # 5.4+
Reviewed-by: Qu Wenruo <wqu@suse.com>
Signed-off-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit e18655cf35 ]
GCC 15 introduces -Werror=unterminated-string-initialization by default,
this results in the following build error
fs/smb/server/smb_common.c:21:35: error: initializer-string for array of 'char' is too long [-Werror=unterminated-string-ini
tialization]
21 | static const char basechars[43] = "0123456789ABCDEFGHIJKLMNOPQRSTUVWXYZ_-!@#$%";
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1: all warnings being treated as errors
To this we are replacing char basechars[43] with a character pointer
and then using strlen to get the length.
Signed-off-by: Brahmajit Das <brahmajit.xyz@gmail.com>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit c5566903af ]
If the parent directory link count is too low (likely directory inode
corruption), just skip updating its link count as if it goes to 0 too
early it can cause unexpected issues.
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 7917f01a28 ]
A recent patch inadvertently broke callbacks for NFSv4.0.
In the 4.0 case we do not expect a session to be found but still need to
call setup_callback_client() which will not try to dereference it.
This patch moves the check for failure to find a session into the 4.1+
branch of setup_callback_client()
Fixes: 1e02c641c3 ("NFSD: Prevent NULL dereference in nfsd4_process_cb_update()")
Signed-off-by: NeilBrown <neilb@suse.de>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 69d803c40e ]
This reverts commit f8c989a0c8.
Before this commit, svc_export_put or expkey_put will call path_put with
sync mode. After this commit, path_put will be called with async mode.
And this can lead the unexpected results show as follow.
mkfs.xfs -f /dev/sda
echo "/ *(rw,no_root_squash,fsid=0)" > /etc/exports
echo "/mnt *(rw,no_root_squash,fsid=1)" >> /etc/exports
exportfs -ra
service nfs-server start
mount -t nfs -o vers=4.0 127.0.0.1:/mnt /mnt1
mount /dev/sda /mnt/sda
touch /mnt1/sda/file
exportfs -r
umount /mnt/sda # failed unexcepted
The touch will finally call nfsd_cross_mnt, add refcount to mount, and
then add cache_head. Before this commit, exportfs -r will call
cache_flush to cleanup all cache_head, and path_put in
svc_export_put/expkey_put will be finished with sync mode. So, the
latter umount will always success. However, after this commit, path_put
will be called with async mode, the latter umount may failed, and if
we add some delay, umount will success too. Personally I think this bug
and should be fixed. We first revert before bugfix patch, and then fix
the original bug with a different way.
Fixes: f8c989a0c8 ("nfsd: release svc_expkey/svc_export with rcu_work")
Signed-off-by: Yang Erkun <yangerkun@huawei.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 18d44c5d06 ]
If mounted with sparseread option, ceph_direct_read_write() ends up
making an unnecessarily allocation for O_DIRECT writes.
Fixes: 03bc06c7b0 ("ceph: add new mount option to enable sparse reads")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 66e0c4f914 ]
The bvecs array which is allocated in iter_get_bvecs_alloc() is leaked
and pages remain pinned if ceph_alloc_sparse_ext_map() fails.
There is no need to delay the allocation of sparse_ext map until after
the bvecs array is set up, so fix this by moving sparse_ext allocation
a bit earlier. Also, make a similar adjustment in __ceph_sync_read()
for consistency (a leak of the same kind in __ceph_sync_read() has been
addressed differently).
Cc: stable@vger.kernel.org
Fixes: 03bc06c7b0 ("ceph: add new mount option to enable sparse reads")
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Stable-dep-of: 18d44c5d06 ("ceph: allocate sparse_ext map only for sparse reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit aaefabc4a5 ]
In fscrypt case and for a smaller read length we can predict the
max count of the extent map. And for small read length use cases
this could save some memories.
[ idryomov: squash into a single patch to avoid build break, drop
redundant variable in ceph_alloc_sparse_ext_map() ]
Signed-off-by: Xiubo Li <xiubli@redhat.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Stable-dep-of: 18d44c5d06 ("ceph: allocate sparse_ext map only for sparse reads")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit d6fd6f8280 upstream.
In two `break` statements, the call to ceph_release_page_vector() was
missing, leaking the allocation from ceph_alloc_page_vector().
Instead of adding the missing ceph_release_page_vector() calls, the
Ceph maintainers preferred to transfer page ownership to the
`ceph_osd_request` by passing `own_pages=true` to
osd_req_op_extent_osd_data_pages(). This requires postponing the
ceph_osdc_put_request() call until after the block that accesses the
`pages`.
Cc: stable@vger.kernel.org
Fixes: 03bc06c7b0 ("ceph: add new mount option to enable sparse reads")
Fixes: f0fe1e54cf ("ceph: plumb in decryption during reads")
Signed-off-by: Max Kellermann <max.kellermann@ionos.com>
Reviewed-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 9abee47580 upstream.
This patch refines the read logic in __ceph_sync_read() to ensure more
predictable and efficient behavior in various edge cases.
- Return early if the requested read length is zero or if the file size
(`i_size`) is zero.
- Initialize the index variable (`idx`) where needed and reorder some
code to ensure it is always set before use.
- Improve error handling by checking for negative return values earlier.
- Remove redundant encrypted file checks after failures. Only attempt
filesystem-level decryption if the read succeeded.
- Simplify leftover calculations to correctly handle cases where the
read extends beyond the end of the file or stops short. This can be
hit by continuously reading a file while, on another client, we keep
truncating and writing new data into it.
- This resolves multiple issues caused by integer and consequent buffer
overflow (`pages` array being accessed beyond `num_pages`):
- https://tracker.ceph.com/issues/67524
- https://tracker.ceph.com/issues/68980
- https://tracker.ceph.com/issues/68981
Cc: stable@vger.kernel.org
Fixes: 1065da21e5 ("ceph: stop copying to iter at EOF on sync reads")
Reported-by: Luis Henriques (SUSE) <luis.henriques@linux.dev>
Signed-off-by: Alex Markuze <amarkuze@redhat.com>
Reviewed-by: Viacheslav Dubeyko <Slava.Dubeyko@ibm.com>
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 12eb22a5a6 upstream.
It becomes a path component, so it shouldn't exceed NAME_MAX
characters. This was hardened in commit c152737be2 ("ceph: Use
strscpy() instead of strcpy() in __get_snap_name()"), but no actual
check was put in place.
Cc: stable@vger.kernel.org
Signed-off-by: Ilya Dryomov <idryomov@gmail.com>
Reviewed-by: Alex Markuze <amarkuze@redhat.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 901ce9705f upstream.
syzbot reported a WARNING in nilfs_rmdir. [1]
Because the inode bitmap is corrupted, an inode with an inode number that
should exist as a ".nilfs" file was reassigned by nilfs_mkdir for "file0",
causing an inode duplication during execution. And this causes an
underflow of i_nlink in rmdir operations.
The inode is used twice by the same task to unmount and remove directories
".nilfs" and "file0", it trigger warning in nilfs_rmdir.
Avoid to this issue, check i_nlink in nilfs_iget(), if it is 0, it means
that this inode has been deleted, and iput is executed to reclaim it.
[1]
WARNING: CPU: 1 PID: 5824 at fs/inode.c:407 drop_nlink+0xc4/0x110 fs/inode.c:407
...
Call Trace:
<TASK>
nilfs_rmdir+0x1b0/0x250 fs/nilfs2/namei.c:342
vfs_rmdir+0x3a3/0x510 fs/namei.c:4394
do_rmdir+0x3b5/0x580 fs/namei.c:4453
__do_sys_rmdir fs/namei.c:4472 [inline]
__se_sys_rmdir fs/namei.c:4470 [inline]
__x64_sys_rmdir+0x47/0x50 fs/namei.c:4470
do_syscall_x64 arch/x86/entry/common.c:52 [inline]
do_syscall_64+0xf3/0x230 arch/x86/entry/common.c:83
entry_SYSCALL_64_after_hwframe+0x77/0x7f
Link: https://lkml.kernel.org/r/20241209065759.6781-1-konishi.ryusuke@gmail.com
Fixes: d25006523d ("nilfs2: pathname operations")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Reported-by: syzbot+9260555647a5132edd48@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=9260555647a5132edd48
Tested-by: syzbot+9260555647a5132edd48@syzkaller.appspotmail.com
Signed-off-by: Edward Adam Davis <eadavis@qq.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6309b8ce98 upstream.
When block_invalidatepage was converted to block_invalidate_folio, the
fallback to block_invalidatepage in folio_invalidate() if the
address_space_operations method invalidatepage (currently
invalidate_folio) was not set, was removed.
Unfortunately, some pseudo-inodes in nilfs2 use empty_aops set by
inode_init_always_gfp() as is, or explicitly set it to
address_space_operations. Therefore, with this change,
block_invalidatepage() is no longer called from folio_invalidate(), and as
a result, the buffer_head structures attached to these pages/folios are no
longer freed via try_to_free_buffers().
Thus, these buffer heads are now leaked by truncate_inode_pages(), which
cleans up the page cache from inode evict(), etc.
Three types of caches use empty_aops: gc inode caches and the DAT shadow
inode used by GC, and b-tree node caches. Of these, b-tree node caches
explicitly call invalidate_mapping_pages() during cleanup, which involves
calling try_to_free_buffers(), so the leak was not visible during normal
operation but worsened when GC was performed.
Fix this issue by using address_space_operations with invalidate_folio set
to block_invalidate_folio instead of empty_aops, which will ensure the
same behavior as before.
Link: https://lkml.kernel.org/r/20241212164556.21338-1-konishi.ryusuke@gmail.com
Fixes: 7ba13abbd3 ("fs: Turn block_invalidatepage into block_invalidate_folio")
Signed-off-by: Ryusuke Konishi <konishi.ryusuke@gmail.com>
Cc: <stable@vger.kernel.org> [5.18+]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 62e2a47cea upstream.
When the server is recalling a layout, we should ignore the count of
outstanding layoutget calls, since the server is expected to return
either NFS4ERR_RECALLCONFLICT or NFS4ERR_RETURNCONFLICT for as long as
the recall is outstanding.
Currently, we may end up livelocking, causing the layout to eventually
be forcibly revoked.
Fixes: bf0291dd22 ("pNFS: Ensure LAYOUTGET and LAYOUTRETURN are properly serialised")
Cc: stable@vger.kernel.org
Signed-off-by: Trond Myklebust <trond.myklebust@hammerspace.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit e9f2517a3e upstream.
Commit ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
fixed a netns UAF by manually enabled socket refcounting
(sk->sk_net_refcnt=1 and sock_inuse_add(net, 1)).
The reason the patch worked for that bug was because we now hold
references to the netns (get_net_track() gets a ref internally)
and they're properly released (internally, on __sk_destruct()),
but only because sk->sk_net_refcnt was set.
Problem:
(this happens regardless of CONFIG_NET_NS_REFCNT_TRACKER and regardless
if init_net or other)
Setting sk->sk_net_refcnt=1 *manually* and *after* socket creation is not
only out of cifs scope, but also technically wrong -- it's set conditionally
based on user (=1) vs kernel (=0) sockets. And net/ implementations
seem to base their user vs kernel space operations on it.
e.g. upon TCP socket close, the TCP timers are not cleared because
sk->sk_net_refcnt=1:
(cf. commit 151c9c724d ("tcp: properly terminate timers for kernel sockets"))
net/ipv4/tcp.c:
void tcp_close(struct sock *sk, long timeout)
{
lock_sock(sk);
__tcp_close(sk, timeout);
release_sock(sk);
if (!sk->sk_net_refcnt)
inet_csk_clear_xmit_timers_sync(sk);
sock_put(sk);
}
Which will throw a lockdep warning and then, as expected, deadlock on
tcp_write_timer().
A way to reproduce this is by running the reproducer from ef7134c7fc
and then 'rmmod cifs'. A few seconds later, the deadlock/lockdep
warning shows up.
Fix:
We shouldn't mess with socket internals ourselves, so do not set
sk_net_refcnt manually.
Also change __sock_create() to sock_create_kern() for explicitness.
As for non-init_net network namespaces, we deal with it the best way
we can -- hold an extra netns reference for server->ssocket and drop it
when it's released. This ensures that the netns still exists whenever
we need to create/destroy server->ssocket, but is not directly tied to
it.
Fixes: ef7134c7fc ("smb: client: Fix use-after-free of network namespace.")
Cc: stable@vger.kernel.org
Signed-off-by: Enzo Matsumiya <ematsumiya@suse.de>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit dfb92681a1 upstream.
[BUG]
There is a bug report in the mailing list where btrfs_run_delayed_refs()
failed to drop the ref count for logical 25870311358464 num_bytes
2113536.
The involved leaf dump looks like this:
item 166 key (25870311358464 168 2113536) itemoff 10091 itemsize 50
extent refs 1 gen 84178 flags 1
ref#0: shared data backref parent 32399126528000 count 0 <<<
ref#1: shared data backref parent 31808973717504 count 1
Notice the count number is 0.
[CAUSE]
There is no concrete evidence yet, but considering 0 -> 1 is also a
single bit flipped, it's possible that hardware memory bitflip is
involved, causing the on-disk extent tree to be corrupted.
[FIX]
To prevent us reading such corrupted extent item, or writing such
damaged extent item back to disk, enhance the handling of
BTRFS_EXTENT_DATA_REF_KEY and BTRFS_SHARED_DATA_REF_KEY keys for both
inlined and key items, to detect such 0 ref count and reject them.
CC: stable@vger.kernel.org # 5.4+
Link: https://lore.kernel.org/linux-btrfs/7c69dd49-c346-4806-86e7-e6f863a66f48@app.fastmail.com/
Reported-by: Frankie Fisher <frankie@terrorise.me.uk>
Reviewed-by: Filipe Manana <fdmanana@suse.com>
Signed-off-by: Qu Wenruo <wqu@suse.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 2ab0837cb9 upstream.
When looking up a non-existent file, efivarfs returns -EINVAL if the
file does not conform to the NAME-GUID format and -ENOENT if it does.
This is caused by efivars_d_hash() returning -EINVAL if the name is not
formatted correctly. This error is returned before simple_lookup()
returns a negative dentry, and is the error value that the user sees.
Fix by removing this check. If the file does not exist, simple_lookup()
will return a negative dentry leading to -ENOENT and efivarfs_create()
already has a validity check before it creates an entry (and will
correctly return -EINVAL)
Signed-off-by: James Bottomley <James.Bottomley@HansenPartnership.com>
Cc: <stable@vger.kernel.org>
[ardb: make efivarfs_valid_name() static]
Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
[ Upstream commit 43fb7bce88 ]
Since commit 0a77d947f5 ("ksmbd: check outstanding simultaneous SMB
operations"), ksmbd enforces a maximum number of simultaneous operations
for a connection. The problem is that reaching the limit causes ksmbd to
close the socket, and the client has no indication that it should have
slowed down.
This behaviour can be reproduced by setting "smb2 max credits = 128" (or
lower), and transferring a large file (25GB).
smbclient fails as below:
$ smbclient //192.168.1.254/testshare -U user%pass
smb: \> put file.bin
cli_push returned NT_STATUS_USER_SESSION_DELETED
putting file file.bin as \file.bin smb2cli_req_compound_submit:
Insufficient credits. 0 available, 1 needed
NT_STATUS_INTERNAL_ERROR closing remote file \file.bin
smb: \> smb2cli_req_compound_submit: Insufficient credits. 0 available,
1 needed
Windows clients fail with 0x8007003b (with smaller files even).
Fix this by delaying reading from the socket until there's room to
allocate a request. This effectively applies backpressure on the client,
so the transfer completes, albeit at a slower rate.
Fixes: 0a77d947f5 ("ksmbd: check outstanding simultaneous SMB operations")
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Signed-off-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Signed-off-by: Sasha Levin <sashal@kernel.org>
[ Upstream commit 83c47d9e0c ]
This changes the semantics of req_running to count all in-flight
requests on a given connection, rather than the number of elements
in the conn->request list. The latter is used only in smb2_cancel,
and the counter is not used
Signed-off-by: Marios Makassikis <mmakassikis@freebox.fr>
Acked-by: Namjae Jeon <linkinjeon@kernel.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
Stable-dep-of: 43fb7bce88 ("ksmbd: fix broken transfers when exceeding max simultaneous operations")
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit a24cae8fc1 upstream.
If growfsrt is run on a filesystem that doesn't have a rt volume, it's
possible to change the rt extent size. If the root directory was
previously set up with an inherited extent size hint and rtinherit, it's
possible that the hint is no longer a multiple of the rt extent size.
Although the verifiers don't complain about this, xfs_repair will, so if
we detect this situation, log the root directory to clean it up. This
is still racy, but it's better than nothing.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 68415b349f upstream.
I notice a rmap query bug in xfs_io fsmap:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
1: 253:16 [8..23]: per-AG metadata 0 (8..23) 16
2: 253:16 [24..39]: inode btree 0 (24..39) 16
3: 253:16 [40..47]: per-AG metadata 0 (40..47) 8
4: 253:16 [48..55]: refcount btree 0 (48..55) 8
5: 253:16 [56..103]: per-AG metadata 0 (56..103) 48
6: 253:16 [104..127]: free space 0 (104..127) 24
......
Bug:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
[root@fedora ~]#
Normally, we should be able to get one record, but we got nothing.
The root cause of this problem lies in the incorrect setting of rm_owner in
the rmap query. In the case of the initial query where the owner is not
set, __xfs_getfsmap_datadev() first sets info->high.rm_owner to ULLONG_MAX.
This is done to prevent any omissions when comparing rmap items. However,
if the current ag is detected to be the last one, the function sets info's
high_irec based on the provided key. If high->rm_owner is not specified, it
should continue to be set to ULLONG_MAX; otherwise, there will be issues
with interval omissions. For example, consider "start" and "end" within the
same block. If high->rm_owner == 0, it will be smaller than the founded
record in rmapbt, resulting in a query with no records. The main call stack
is as follows:
xfs_ioc_getfsmap
xfs_getfsmap
xfs_getfsmap_datadev_rmapbt
__xfs_getfsmap_datadev
info->high.rm_owner = ULLONG_MAX
if (pag->pag_agno == end_ag)
xfs_fsmap_owner_to_rmap
// set info->high.rm_owner = 0 because fmr_owner == -1ULL
dest->rm_owner = 0
// get nothing
xfs_getfsmap_datadev_rmapbt_query
The problem can be resolved by simply modify the xfs_fsmap_owner_to_rmap
function internal logic to achieve.
After applying this patch, the above problem have been solved:
[root@fedora ~]# xfs_io -c 'fsmap -vvvv -d 0 3' /mnt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 253:16 [0..7]: static fs metadata 0 (0..7) 8
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Zizhi Wo <wozizhi@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 8d16762047 upstream.
If a file has the S_DAX flag (aka fsdax access mode) set, we cannot
allow users to change the realtime flag unless the datadev and rtdev
both support fsdax access modes. Even if there are no extents allocated
to the file, the setattr thread could be racing with another thread
that has already started down the write code paths.
Fixes: ba23cba9b3 ("fs: allow per-device dax status checking for filesystems")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 73c34b0b85 upstream.
It turns out that I misunderstood the difference between the attr and
attr2 feature bits. "attr" means that at some point an attr fork was
created somewhere in the filesystem. "attr2" means that inodes have
variable-sized forks, but says nothing about whether or not there
actually /are/ attr forks in the system.
If we have an attr fork, we only need to check that attr is set.
Fixes: 99d9d8d05d ("xfs: scrub inode block mappings")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 0c7fcdb6d0 upstream.
This adds sanity checks for xfs_dir2_data_unused and xfs_dir2_data_entry
to make sure don't stray beyond valid memory region. Before patching, the
loop simply checks that the start offset of the dup and dep is within the
range. So in a crafted image, if last entry is xfs_dir2_data_unused, we
can change dup->length to dup->length-1 and leave 1 byte of space. In the
next traversal, this space will be considered as dup or dep. We may
encounter an out of bound read when accessing the fixed members.
In the patch, we make sure that the remaining bytes large enough to hold
an unused entry before accessing xfs_dir2_data_unused and
xfs_dir2_data_unused is XFS_DIR2_DATA_ALIGN byte aligned. We also make
sure that the remaining bytes large enough to hold a dirent with a
single-byte name before accessing xfs_dir2_data_entry.
Signed-off-by: lei lu <llfamsec@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Chandan Babu R <chandanbabu@kernel.org>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit ee20808d84 upstream.
[backport: dependency of d3b689d and f23660f]
Create a new helper function to calculate the fundamental allocation
unit (i.e. the smallest unit of space we can allocate) of a file.
Things are going to get hairy with range-exchange on the realtime
device, so prepare for this now.
Remove the static attribute from xfs_is_falloc_aligned since the next
patch will need it.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 00acb28d96 upstream.
[backport: dependency of d3b689d and f23660f]
Move the two public symbols in xfs_file.c to xfs_file.h. We're about to
add more public symbols in that source file, so let's finally create the
header file.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 24a4e1cb32 upstream.
I noticed that callers of xfs_qm_vop_dqalloc use the following code to
compute the anticipated uid of the new file:
mapped_fsuid(idmap, &init_user_ns);
whereas the VFS uses a slightly different computation for actually
assigning i_uid:
mapped_fsuid(idmap, i_user_ns(inode));
Technically, these are not the same things. According to Christian
Brauner, the only time that inode->i_sb->s_user_ns != &init_user_ns is
when the filesystem was mounted in a new mount namespace by an
unpriviledged user. XFS does not allow this, which is why we've never
seen bug reports about quotas being incorrect or the uid checks in
xfs_qm_vop_create_dqattach tripping debug assertions.
However, this /is/ a logic bomb, so let's make the code consistent.
Link: https://lore.kernel.org/linux-fsdevel/20240617-weitblick-gefertigt-4a41f37119fa@brauner/
Fixes: c14329d39f ("fs: port fs{g,u}id helpers to mnt_idmap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 150bb10a28 upstream.
generic/388 has an annoying tendency to fail like this during log
recovery:
XFS (sda4): Unmounting Filesystem 435fe39b-82b6-46ef-be56-819499585130
XFS (sda4): Mounting V5 Filesystem 435fe39b-82b6-46ef-be56-819499585130
XFS (sda4): Starting recovery (logdev: internal)
00000000: 49 4e 81 b6 03 02 00 00 00 00 00 07 00 00 00 07 IN..............
00000010: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 10 ................
00000020: 35 9a 8b c1 3e 6e 81 00 35 9a 8b c1 3f dc b7 00 5...>n..5...?...
00000030: 35 9a 8b c1 3f dc b7 00 00 00 00 00 00 3c 86 4f 5...?........<.O
00000040: 00 00 00 00 00 00 02 f3 00 00 00 00 00 00 00 00 ................
00000050: 00 00 1f 01 00 00 00 00 00 00 00 02 b2 74 c9 0b .............t..
00000060: ff ff ff ff d7 45 73 10 00 00 00 00 00 00 00 2d .....Es........-
00000070: 00 00 07 92 00 01 fe 30 00 00 00 00 00 00 00 1a .......0........
00000080: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
00000090: 35 9a 8b c1 3b 55 0c 00 00 00 00 00 04 27 b2 d1 5...;U.......'..
000000a0: 43 5f e3 9b 82 b6 46 ef be 56 81 94 99 58 51 30 C_....F..V...XQ0
XFS (sda4): Internal error Bad dinode after recovery at line 539 of file fs/xfs/xfs_inode_item_recover.c. Caller xlog_recover_items_pass2+0x4e/0xc0 [xfs]
CPU: 0 PID: 2189311 Comm: mount Not tainted 6.9.0-rc4-djwx #rc4
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS ?-20171121_152543-x86-ol7-builder-01.us.oracle.com-4.el7.1 04/01/2014
Call Trace:
<TASK>
dump_stack_lvl+0x4f/0x60
xfs_corruption_error+0x90/0xa0
xlog_recover_inode_commit_pass2+0x5f1/0xb00
xlog_recover_items_pass2+0x4e/0xc0
xlog_recover_commit_trans+0x2db/0x350
xlog_recovery_process_trans+0xab/0xe0
xlog_recover_process_data+0xa7/0x130
xlog_do_recovery_pass+0x398/0x840
xlog_do_log_recovery+0x62/0xc0
xlog_do_recover+0x34/0x1d0
xlog_recover+0xe9/0x1a0
xfs_log_mount+0xff/0x260
xfs_mountfs+0x5d9/0xb60
xfs_fs_fill_super+0x76b/0xa30
get_tree_bdev+0x124/0x1d0
vfs_get_tree+0x17/0xa0
path_mount+0x72b/0xa90
__x64_sys_mount+0x112/0x150
do_syscall_64+0x49/0x100
entry_SYSCALL_64_after_hwframe+0x4b/0x53
</TASK>
XFS (sda4): Corruption detected. Unmount and run xfs_repair
XFS (sda4): Metadata corruption detected at xfs_dinode_verify.part.0+0x739/0x920 [xfs], inode 0x427b2d1
XFS (sda4): Filesystem has been shut down due to log error (0x2).
XFS (sda4): Please unmount the filesystem and rectify the problem(s).
XFS (sda4): log mount/recovery failed: error -117
XFS (sda4): log mount failed
This inode log item recovery failing the dinode verifier after
replaying the contents of the inode log item into the ondisk inode.
Looking back into what the kernel was doing at the time of the fs
shutdown, a thread was in the middle of running a series of
transactions, each of which committed changes to the inode.
At some point in the middle of that chain, an invalid (at least
according to the verifier) change was committed. Had the filesystem not
shut down in the middle of the chain, a subsequent transaction would
have corrected the invalid state and nobody would have noticed. But
that's not what happened here. Instead, the invalid inode state was
committed to the ondisk log, so log recovery tripped over it.
The actual defect here was an overzealous inode verifier, which was
fixed in a separate patch. This patch adds some transaction precommit
functions for CONFIG_XFS_DEBUG=y mode so that we can detect these kinds
of transient errors at transaction commit time, where it's much easier
to find the root cause.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Catherine Hoang <catherine.hoang@oracle.com>
Acked-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Sasha Levin <sashal@kernel.org>
commit 44d9b07e52 upstream.
Committing a transaction tx0 with a defer ops chain of (A, B, C)
creates a chain of transactions that looks like this:
tx0 -> txA -> txB -> txC
Prior to commit cb04211748, __xfs_trans_commit would run precommits
on tx0, then call xfs_defer_finish_noroll to convert A-C to tx[A-C].
Unfortunately, after the finish_noroll loop we forgot to run precommits
on txC. That was fixed by adding the second precommit call.
Unfortunately, none of us remembered that xfs_defer_finish_noroll
calls __xfs_trans_commit a second time to commit tx0 before finishing
work A in txA and committing that. In other words, we run precommits
twice on tx0:
xfs_trans_commit(tx0)
__xfs_trans_commit(tx0, false)
xfs_trans_run_precommits(tx0)
xfs_defer_finish_noroll(tx0)
xfs_trans_roll(tx0)
txA = xfs_trans_dup(tx0)
__xfs_trans_commit(tx0, true)
xfs_trans_run_precommits(tx0)
This currently isn't an issue because the inode item precommit is
idempotent; the iunlink item precommit deletes itself so it can't be
called again; and the buffer/dquot item precommits only check the incore
objects for corruption. However, it doesn't make sense to run
precommits twice.
Fix this situation by only running precommits after finish_noroll.
Cc: <stable@vger.kernel.org> # v6.4
Fixes: cb04211748 ("xfs: defered work could create precommits")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit ffc3ea4f3c upstream.
Fix a minor mistakes in the scrub tracepoints that can manifest when
inode-rooted btrees are enabled. The existing code worked fine for bmap
btrees, but we should tighten the code up to be less sloppy.
Cc: <stable@vger.kernel.org> # v5.7
Fixes: 92219c292a ("xfs: convert btree cursor inode-private member names")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 7ce31f20a0 upstream.
Way back when we first implemented FICLONE for XFS, life was simple --
either the the entire remapping completed, or something happened and we
had to return an errno explaining what happened. Neither of those
ioctls support returning partial results, so it's all or nothing.
Then things got complicated when copy_file_range came along, because it
actually can return the number of bytes copied, so commit 3f68c1f562
tried to make it so that we could return a partial result if the
REMAP_FILE_CAN_SHORTEN flag is set. This is also how FIDEDUPERANGE can
indicate that the kernel performed a partial deduplication.
Unfortunately, the logic is wrong if an error stops the remapping and
CAN_SHORTEN is not set. Because those callers cannot return partial
results, it is an error for ->remap_file_range to return a positive
quantity that is less than the @len passed in. Implementations really
should be returning a negative errno in this case, because that's what
btrfs (which introduced FICLONE{,RANGE}) did.
Therefore, ->remap_range implementations cannot silently drop an errno
that they might have when the number of bytes remapped is less than the
number of bytes requested and CAN_SHORTEN is not set.
Found by running generic/562 on a 64k fsblock filesystem and wondering
why it reported corrupt files.
Cc: <stable@vger.kernel.org> # v4.20
Fixes: 3fc9f5e409 ("xfs: remove xfs_reflink_remap_range")
Really-Fixes: 3f68c1f562 ("xfs: support returning partial reflink results")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 6d7b4bc1c3 upstream.
In commit 2c813ad66a, I partially fixed a bug wherein xfs_btree_insrec
would erroneously try to update the parent's key for a block that had
been split if we decided to insert the new record into the new block.
The solution was to detect this situation and update the in-core key
value that we pass up to the caller so that the caller will (eventually)
add the new block to the parent level of the tree with the correct key.
However, I missed a subtlety about the way inode-rooted btrees work. If
the full block was a maximally sized inode root block, we'll solve that
fullness by moving the root block's records to a new block, resizing the
root block, and updating the root to point to the new block. We don't
pass a pointer to the new block to the caller because that work has
already been done. The new record will /always/ land in the new block,
so in this case we need to use xfs_btree_update_keys to update the keys.
This bug can theoretically manifest itself in the very rare case that we
split a bmbt root block and the new record lands in the very first slot
of the new block, though I've never managed to trigger it in practice.
However, it is very easy to reproduce by running generic/522 with the
realtime rmapbt patchset if rtinherit=1.
Cc: <stable@vger.kernel.org> # v4.8
Fixes: 2c813ad66a ("xfs: support btrees with overlapping intervals for keys")
Signed-off-by: "Darrick J. Wong" <djwong@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
This reverts commit dfe6c5692f ("ocfs2: fix the la space leak when
unmounting an ocfs2 volume").
In commit dfe6c5692f, the commit log "This bug has existed since the
initial OCFS2 code." is wrong. The correct introduction commit is
30dd3478c3 ("ocfs2: correctly use ocfs2_find_next_zero_bit()").
The influence of commit dfe6c5692f is that it provides a correct
fix for the latest kernel. however, it shouldn't be pushed to stable
branches. Let's use this commit to revert all branches that include
dfe6c5692f and use a new fix method to fix commit 30dd3478c3.
Fixes: dfe6c5692f ("ocfs2: fix the la space leak when unmounting an ocfs2 volume")
Signed-off-by: Heming Zhao <heming.zhao@suse.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
commit 69313850dc upstream.
There are reports that system cannot suspend due to running trim because
the task responsible for trimming the device isn't able to finish in
time, especially since we have a free extent discarding phase, which can
trim a lot of unallocated space. There are no limits on the trim size
(unlike the block group part).
Since trime isn't a critical call it can be interrupted at any time,
in such cases we stop the trim, report the amount of discarded bytes and
return an error.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=219180
Link: https://bugzilla.suse.com/show_bug.cgi?id=1229737
CC: stable@vger.kernel.org # 5.15+
Signed-off-by: Luca Stefani <luca.stefani.ge1@gmail.com>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
