Two lifecycle holes the registry and the consumer helper left open.
`AdapterRegistrationHandle.replace` had no liveness guard: after the handle's
disposer ran, a replace put routes back into the registry with nothing left to
release them, so the adapter leaked permanently. `owned` being empty cannot
carry that fact, because `replace([])` is the legal empty-section state, so the
disposer records it explicitly.
`installSettingsSection`'s watcher lacked the guard its own disposer carries:
a stored change landing while the consumer unloads reached `onChange`, which
re-registers routes against a fiber whose resources are being released.
Also documents `withFileLock` in the atomic-write README (it claimed one
export), records the age-based lock takeover as a known limitation, and lists
ctx.settings and ctx.credentials in the architecture capability table.
Five findings from the #939 review, each reproduced before being fixed.
**Configuration reads are as privileged as writes.** `settings.describe`
returns every exposed namespace's configuration and `credentials.describe`
reports whether an arbitrary environment-variable name is configured and from
where — reconnaissance no anonymous caller should have. Both join
PRIVILEGED_METHODS, so the whole configuration plane is loopback-only until
real authentication exists; `trustedHosts` was never authentication. The model
catalog stays reachable: it carries no endpoints or key state, and a LAN
client's model picker legitimately needs it. Asserted over a real HTTP server,
because the Host header a browser actually sends is what decides this.
**The proxy serves only namespaces a registered model provider addresses.**
The settings seam is general — any plugin may register one — but the Web
configuration plane is the model-provider surface. Without the gate, every
future `settings.register()` would silently become remotely readable and
writable configuration. An unregistered namespace and an unexposed one answer
identically, so no caller can enumerate the registry one probe at a time.
**Path-addressed writes replace the redacted-document rebuild.** The editor
reads the REDACTED descriptor, so rebuilding a section from it and replacing
wholesale deleted every literal secret the wire never returned — reproduced as
`{baseURL, reasoning}` in, stored `apiKey` gone out. `settings.mutate` applies
set/unset ops to the section as it stands at the front of the seam's write
queue, and the client names only fields it can see, so an unseen secret is
untouched by construction rather than by care.
P2s in the same pass: `llm/adapters-updated` now contains async listener
rejections (an uncontained one escaped as unhandledRejection, contradicting
the documented "observer failures are contained"); llm-deepseek's retry-policy
swap uses the atomic `registration.replace` instead of dispose-then-register,
which published `[]` then `["deepseek-official"]` so an observer saw the
provider disappear and come back; and a transport rejection no longer strands
the page in `loading` or a card in `busy`, with removal failures surfaced on
the page banner instead of swallowed.
Both provider READMEs state what actually holds: credentials-local now
documents the physical-line editor, the read-modify-write under the
writer lock, and a Security boundary section saying plainly that the file
mode stops other OS users and not the model. sandbox-policy documents
readDenyPaths and its per-backend enforcement. The llm READMEs carry the
registration handle, pi-ai's credential-miss semantics, and DeepSeek's
same-generation snapshot; app-boot and the CLI README stop describing
$DSH_HOME/.env as an environment layer.
A new Agent Note records the round (and the prior seam note cross-links
it); the sandbox and core catalog pages gain readDenyPaths and
AdapterRegistrationHandle with their manifest entries. The headless
missing-credential snapshot re-records for the reworded guidance, pi-ai
gains the Loader-composition guard its twin already had, and the
deliberate provider symmetry is marked for the clone detector.
The policy home's resolve() now stamps readDenyPaths, so every consumer
that pins the resolved shape (bash-sandbox hand-off, tool-fs stamps)
carries it, and three uncovered branches gained real tests: landlock
reporting partial enforcement for a denial it cannot express, the
policy's default under programmatic construction, and both ambient
credential paths in llm-deepseek without a mounted seam.
Four review findings across the seam and both adapters.
registerAdapter now returns a handle carrying replace(providers): the
candidate route set is validated in full before anything moves, so a
route another adapter owns leaves the previous registration intact, and
the swap itself is one synchronous section with no observable gap. pi-ai
uses it instead of dispose-then-register — the old shape dropped every
route when the new set conflicted, and its facts cache could then equal
the registry's, so reverting to a working configuration never re-applied.
Its registration facts are also sorted by provider, so a settings
document that merely reorders keys no longer triggers a swap.
DeepSeek's per-request snapshot now carries the credential facts, and
resolveApiKey receives it instead of re-reading the raw config: a
settings generation the resolver rejects can no longer contribute its
literal key to a request the previous generation's endpoint serves.
pi-ai only defers to the SDK's provider-native discovery when a profile
names no credential at all; a configured apiKeyEnv that misses now fails
with MISSING_CREDENTIAL naming the route and the reference, instead of
handing pi-ai undefined and letting it authenticate with an unrelated
ambient key.
The eager boot-time credential probe is gone: it could run before the
credentials service mounted and reported every failure as a missing key.
The route stays registered and browsable; the first request gives the
accurate error, whose guidance now leads with the credential store and
mentions a literal apiKey last.
ctx.llm gains 'llm/adapters-updated' — a payload-free registry notification
emitted at every topology commit point (adapter routes registering or
disposing, directory entries appearing or withdrawing) with contained
observers and INVARIANT rethrow — plus registerConfigurableProviders/
listConfigurableProviders, the directory of routes an adapter plugin can
activate through configuration. llm-deepseek declares deepseek-official
(whole llm-deepseek section as profile); llm-pi-ai declares the full
installed catalog under providers.<provider> even while dormant, so the
web settings surface can offer every provider before any route exists.
The invariant companion asserts the registry stays readable at each
notification.
The native adapter's route was named deepseek, colliding with pi-ai's
catalog provider of the same name, so the two DeepSeek paths could never
be mounted side by side. The web settings page needs both configurable at
once. Compositions, fixtures, goldens, scaffolding defaults, and docs all
move together (pre-release, no shim); TUI/session-query-spill/
missing-credential goldens re-recorded through their keyless refresh
modes because provider-name length shifts box padding and spill
truncation points.
Implements the approved simplification Agent Note: sse.ts now pipes the
response body through TextDecoderStream and EventSourceParserStream
(eventsource-parser/stream) and keeps only the DeepSeek protocol shim —
yield each event's data, terminate on [DONE], throw
LlmError('STREAM_CLOSED') on EOF without the sentinel. The SSE
spec-conformance tests are deleted; sse.spec.ts pins only the
[DONE]/STREAM_CLOSED/EOF contract, including the new spec-strict verdict
that an unterminated trailing event is truncation (the old parser
flushed it — a robustness nicety no real provider shape needs).
eventsource-parser@^3.1.0 becomes llm-deepseek's second runtime
dependency (already in the lockfile transitively via the MCP SDK).
Docs: the Agent Note moves proposed/ → implemented/ and is rewritten per
the lifecycle contract; the rejected NIH roll-up note's inbound links
follow. The twin-adapters note, dsh-llm LlmAdapter JSDoc (and its
type-equiv fences), cookbook, group/package READMEs, root AGENTS.md
layout line, sdk-helper comments, and the regenerated config catalog
drop the "hand-rolled fetch + SSE" claim in both languages; all eight
touched pairs re-recorded.
Validate replay sidecars and cross-copy failure facts, make browser console tripwires and macOS temp paths deterministic, and wait for asynchronous TUI resume details. Keep the owning docs, translations, and generated catalog aligned.
Both ds-review-bot findings were real:
- markLlmAdapterFailure's carried-facts cross-check read error.code
directly; a foreign Error with a valid own failure payload but a
throwing code accessor would replace the original adapter error with
the accessor exception, breaking the error-identity guarantee. The
read now goes through foreignErrorCode(), which contains the trap and
falls back to the normalized snapshot (test: hostile code accessor
beside a valid failure payload -> original identity kept, UNKNOWN
facts).
- live-interactions' afterEach caught scaffold.close() into undefined,
silently disabling ReplayHandle.assertConsumed() — the fixture-drift
tripwire — and hiding cleanup defects. Teardown now runs every step,
collects failures, and rethrows (AggregateError when several).
markLlmAdapterFailure gated the own-`failure` data property on instanceof
HarnessError, which drops the validated facts exactly when class identity is
lost — two copies of this package in one process (e.g. a source-plane replay
harness throwing into a lib-plane boot) make the replay-thrown LlmError's
SERVER/AUTH code arrive as UNKNOWN and defeat llm-retry's retryable-code
match. The snapshot is already validated field-by-field and cross-checked
against the error's own code, so honor it on any Error.
A well-formed provider stream that ends with finish_reason stop and zero
content blocks previously became a successful empty assistant message: the
turn completed silently, and drivers like goal-session counted the no-op
round. Both adapters now map that degenerate completion to a finish
{kind:'error'} with the new canonical EMPTY_RESPONSE code from dsh-llm, and
dsh-llm-retry adds the code to its default retryable set, so the existing
closed-step recovery path retries it and fails loud once the budget is
exhausted.
Covered by adapter unit tests, an llm-retry default-policy test, and a new
authored keyless ACP snapshot (empty-response-retry) with a deterministic
1 ms zero-jitter retry overlay.
