refactor(cli)!: one shared base config with per-surface overlays
`dsh` shipped two config trees that were 43 rows the same: apps/cli/cordis.yml composed web as 74 flat rows, while the TUI booted examples/tui-agent/cordis.yml whose single `@deepseek-ai/dsh-tui-demo` row mounted twelve plugins behind a twenty-key pass-through Config. Neither file was what its location claimed — apps/cli hardcoded the "example" as the product default and the "demo" bundle was the application — and every capability change had to be made twice. - apps/cli/base.cordis.yml holds the 43 shared rows; tui.cordis.yml and web.cordis.yml are patch lists stating only what differs per surface - overlays apply as SIBLING patch lists at one include level, because include patches never cross an include boundary. Precedence: base < surface < (--config | personal ~/.dsh/config.yaml) < launcher flag/profile patches - `--config` now applies an overlay INSTEAD OF the personal one, so a demo or test tree never inherits the user's route; new `--config-replace` boots a file as the entire tree (the old `--config` behaviour). Both survive /resume - vendor/include: index each `insert`ed row as it is added so a later patch can configure or disable it. Upstream built the id index once before the patch loop, leaving every surface-only row — the whole TUI front door — silently unpatchable from user config. Logged as local modification 8 - session identity moves to dsh-agent-loop's CONFIGURED_AGENT_IDENTITIES_KEY; dsh-tui's MAIN_SESSION_ID_KEY is deleted (only the bundle read it) - delete examples/tui-agent, examples/cordis-agent, packages/examples/tui-demo; TUI tests → apps/cli/tests, cordis e2e → packages/cordis/tool-cordis/tests, examples/code-mode survives as an overlay leaf - `dsh web` gains --config, threaded into AppCLIEntry as an extra overlay Three latent defects surfaced and are fixed here: the TUI captured the optional sessionQuery service once at construction and could permanently disable /resume when it won the mount race; the session-store root silently reverted to a project-local ./.sessions; --config-replace was dropped by the resume handoff. Verified by booting each tree through the real Loader (TUI 55 entries, web 75, zero unsettled) rather than reading YAML. All eight terminal snapshots replay byte-identically; 14/14 PTY smoke, 112/112 snapshots, 25/25 doc-sync, hygiene and lint clean.
This commit is contained in:
@@ -2,5 +2,5 @@
|
||||
# side as of the last confirmed-consistent state. Both languages carry equal authority;
|
||||
# after editing either side, bring the other along and re-record with:
|
||||
# pnpm run verify-translation-pairing --write .agents/notes/implemented/testing/2026-07-18-tui-terminal-state-snapshots.md
|
||||
2026-07-18-tui-terminal-state-snapshots.md: 18c79bc2d0dabf4d78887354f30a2cdc083899e1
|
||||
2026-07-18-tui-terminal-state-snapshots.zh.md: d1d4a6ca859e94a153e0bf645a17f03c0dac234b
|
||||
2026-07-18-tui-terminal-state-snapshots.md: b8e6f77d96fbd4d077d55fefa3652813c737a37b
|
||||
2026-07-18-tui-terminal-state-snapshots.zh.md: 1b2f6b58e53d9ccd5f0935dab9e9812d2bfe3eb4
|
||||
|
||||
@@ -21,7 +21,7 @@ TUI coverage has four complementary layers:
|
||||
3. `examples/tui-agent/tests/tui.snapshot.ts` replays committed JSONL session logs through the production agent loop and real tools, then compares the resulting semantic terminal state.
|
||||
4. `examples/tui-agent/tests/tui-keyless-smoke.e2e.ts` boots the real Loader composition in a PTY, drives a scripted conversation through streaming and `ask_user_question`, and verifies startup, input, exit, failure reporting, and terminal restoration.
|
||||
|
||||
The runnable TUI has its own `examples/tui-agent` leaf beside the Headless and ACP leaves. It owns the interactive coding backends and tools directly and loads `@deepseek-ai/dsh-tui-demo`; TUI snapshots and PTY tests live with that leaf. The [redundant-agent removal](../simplification/2026-07-20-remove-stdio-and-echo-agents.md) owns this consolidation.
|
||||
The runnable TUI is the shipped `apps/cli` composition: the shared `base.cordis.yml` plus the `tui.cordis.yml` overlay, which owns the interactive coding backends, tools, and front door. TUI snapshots and PTY tests live in `apps/cli/tests/`. The [redundant-agent removal](../simplification/2026-07-20-remove-stdio-and-echo-agents.md) owns this consolidation.
|
||||
|
||||
### Recorded-session replay
|
||||
|
||||
|
||||
@@ -21,7 +21,7 @@ TUI 覆盖分为四个互补层次:
|
||||
3. `examples/tui-agent/tests/tui.snapshot.ts` 通过生产 agent loop 和真实工具回放已提交的 JSONL 会话日志,再比较生成的语义终端状态。
|
||||
4. `examples/tui-agent/tests/tui-keyless-smoke.e2e.ts` 在 PTY 中启动真实 Loader 组合,驱动一段经过流式输出和 `ask_user_question` 的脚本化会话,并验证启动、输入、退出、失败报告和终端恢复。
|
||||
|
||||
可运行 TUI 在 `examples/tui-agent` 中拥有独立叶节点,与 Headless 和 ACP 叶节点并列。它直接拥有交互式 coding 后端与工具,并加载 `@deepseek-ai/dsh-tui-demo`;TUI 快照和 PTY 测试也归属这个叶节点。[移除重复 agent 的决策](../simplification/2026-07-20-remove-stdio-and-echo-agents.md)负责此次整合。
|
||||
可运行 TUI 就是交付的 `apps/cli` 组合:共享的 `base.cordis.yml` 加 `tui.cordis.yml` overlay,后者拥有交互式 coding 后端、工具与前端入口。TUI 快照和 PTY 测试位于 `apps/cli/tests/`。[移除重复 agent 的决策](../simplification/2026-07-20-remove-stdio-and-echo-agents.md)负责此次整合。
|
||||
|
||||
### 已录制会话回放
|
||||
|
||||
|
||||
@@ -2,5 +2,5 @@
|
||||
# side as of the last confirmed-consistent state. Both languages carry equal authority;
|
||||
# after editing either side, bring the other along and re-record with:
|
||||
# pnpm run verify-translation-pairing --write .agents/notes/implemented/testing/2026-07-24-web-gui-browser-e2e-lane.md
|
||||
2026-07-24-web-gui-browser-e2e-lane.md: ce59dcce270d548c91e3719eee8e9c83aea0c154
|
||||
2026-07-24-web-gui-browser-e2e-lane.zh.md: bad3dd15ed7b98cc17340666a6c1094d0de057b1
|
||||
2026-07-24-web-gui-browser-e2e-lane.md: 37e2bccddb3725073ebb38377c2cd7464b418012
|
||||
2026-07-24-web-gui-browser-e2e-lane.zh.md: f2bbdbb028a3e35831298fea4d5a0f3dec410b82
|
||||
|
||||
@@ -16,7 +16,7 @@ The web GUI ships as a real assembled chain — chromium page → client plugin
|
||||
|
||||
A plain shared-fixture module (the [testing-policy sanctioned shape](../../../../docs/testing.md)), not a package: the gate-worthy logic — replay derivation, session parsing, log scrubbing, persistence — lives in the gated packages `dsh-llm-replay`, `dsh-acp-snapshot`, and `dsh-session-persistence-jsonl`; what remains is boot wiring and browser glue, and chromium-driving code cannot hold per-file 100% coverage on the browserless coverage runners.
|
||||
|
||||
`launchWebScaffold()` boots the real web composition from the shipped `apps/cli/cordis.yml` through the vendored Loader's include mechanism — the same tree and mechanism `AppCLIEntry` drives for `dsh web`. Divergences ride include patches over that tree, the ACP `cordis.snapshot.yml` pattern expressed in-process: temp `persistenceRoot`, `workspace-context` disabled (recorded fixtures must not embed this repo's AGENTS.md), `session-title-llm` disabled (its fire-and-forget title call would race the loop for the session's replay cursor), the webserver row pinned to port 0 with the built dist, and in keyless modes `llm-deepseek` disabled. A patch id that stops matching a row fails the boot sweep loudly instead of drifting. The boot runs `chdir`'d to the temp workspace so the api-gateway's `process.cwd()` session default, tool cwds, and fixtures agree; the `dsh web` bin's own glue (argv, profile json, AppCLIEntry) stays held by the keyless CLI smokes in `smoke-real.e2e.ts`. Setup rollback and ordinary close both dispose the Cordis tree before removing the two owned temp roots, attempt every cleanup independently, and report cleanup failures without masking the setup failure.
|
||||
`launchWebScaffold()` boots the real web composition from the shipped `apps/cli/base.cordis.yml` plus its surface overlay through the vendored Loader's include mechanism — the same tree and mechanism `AppCLIEntry` drives for `dsh web`. Divergences ride include patches over that tree, the ACP `cordis.snapshot.yml` pattern expressed in-process: temp `persistenceRoot`, `workspace-context` disabled (recorded fixtures must not embed this repo's AGENTS.md), `session-title-llm` disabled (its fire-and-forget title call would race the loop for the session's replay cursor), the webserver row pinned to port 0 with the built dist, and in keyless modes `llm-deepseek` disabled. A patch id that stops matching a row fails the boot sweep loudly instead of drifting. The boot runs `chdir`'d to the temp workspace so the api-gateway's `process.cwd()` session default, tool cwds, and fixtures agree; the `dsh web` bin's own glue (argv, profile json, AppCLIEntry) stays held by the keyless CLI smokes in `smoke-real.e2e.ts`. Setup rollback and ordinary close both dispose the Cordis tree before removing the two owned temp roots, attempt every cleanup independently, and report cleanup failures without masking the setup failure.
|
||||
|
||||
Keyless model displacement is the disabled adapter row plus `installLlmReplay` filling the open seam on the settled root ctx in providers-catalog mode — never catch-all: with the adapter row disabled no adapter exists, so catch-all would leave `resolveModelInfo` unroutable and `compact-basic`'s post-step pressure check would warn every step instead of being provably inert (the published 128k `contextWindow` keeps it inert for small fixtures). The direct install rather than an inserted replay plugin row is deliberate: it returns the `ReplayHandle` the teardown consumption check needs. A scenario with no fixture leaves the seam empty, so a stray stream fails loud with NO_ADAPTER.
|
||||
|
||||
@@ -66,7 +66,7 @@ Surveyed AI-chat/agent web UIs and mocking layers (LibreChat, vercel/ai-chatbot
|
||||
|
||||
**A committed normalized-session-log golden as a second expected surface.** Rejected: the log surface is pinned by the ACP/headless/TUI suites through the same loop and persistence; here it would double refresh cost and re-test lower tiers. Inline world-state assertions on root-context events keep the world-verification duty.
|
||||
|
||||
**Spawning the `dsh web` bin with a `DSH_SNAPSHOT` replay branch.** Rejected: it needs a test-only replay branch plus environment plumbing in the shipped CLI. The in-process scaffold already loads the same `apps/cli/cordis.yml`; only argv, profile JSON, and `AppCLIEntry` glue remain outside it, and the keyless CLI smokes cover those paths.
|
||||
**Spawning the `dsh web` bin with a `DSH_SNAPSHOT` replay branch.** Rejected: it needs a test-only replay branch plus environment plumbing in the shipped CLI. The in-process scaffold already loads the same `apps/cli/base.cordis.yml` plus its surface overlay; only argv, profile JSON, and `AppCLIEntry` glue remain outside it, and the keyless CLI smokes cover those paths.
|
||||
|
||||
**Changing the wire protocol for testability.** Rejected: the contract already has a first-class keyless isomorphic seam (`InProcessApiClient(toFetchHandler(api))`), the per-event unbatched SSE is exactly what makes replay observable in a browser, and testing a wire we no longer ship would invert the tier's purpose.
|
||||
|
||||
|
||||
@@ -16,7 +16,7 @@ Web GUI 以一条真实组装链交付——chromium 页面 → client 插件 bu
|
||||
|
||||
一个普通的共享 fixture 模块([测试政策认可的形态](../../../../docs/testing.md)),不是包:值得门禁把守的逻辑——回放推导、会话解析、日志脱敏、持久化——都在已受门禁的包 `dsh-llm-replay`、`dsh-acp-snapshot`、`dsh-session-persistence-jsonl` 中;剩下的只是启动接线和浏览器胶水,而驱动 chromium 的源码在无浏览器的覆盖率 runner 上无法诚实保持逐文件 100% 覆盖率。
|
||||
|
||||
`launchWebScaffold()` 通过 vendored Loader 的 include 机制,从交付的 `apps/cli/cordis.yml` 启动真实 web 组合——与 `AppCLIEntry` 为 `dsh web` 驱动的是同一棵树、同一套机制。差异全部经 include patch 覆盖在这棵树上,即 ACP `cordis.snapshot.yml` 模式的进程内表达:临时 `persistenceRoot`;禁用 `workspace-context`(录制的 fixture 不得嵌入本仓库的 AGENTS.md);禁用 `session-title-llm`(其发后不管的标题调用会与循环争抢会话的回放游标);webserver 行钉到端口 0 加已构建 dist;无密钥模式下禁用 `llm-deepseek`。patch 的 id 一旦不再匹配任何行,boot 扫描会大声失败而不是漂移。boot 在临时工作区 `chdir` 下运行,使 api-gateway 的 `process.cwd()` 会话默认值、工具 cwd 与 fixture 一致;`dsh web` bin 自身的胶水(argv、profile json、AppCLIEntry)仍由 `smoke-real.e2e.ts` 中的无密钥 CLI 冒烟把守。初始化回滚和正常关闭都会先对 Cordis 树执行 dispose(资源释放),再删除 scaffold 持有的两个临时根目录;每项清理都会独立尝试,并会报告清理失败而不掩盖初始化失败。
|
||||
`launchWebScaffold()` 通过 vendored Loader 的 include 机制,从交付的 `apps/cli/base.cordis.yml` plus its surface overlay 启动真实 web 组合——与 `AppCLIEntry` 为 `dsh web` 驱动的是同一棵树、同一套机制。差异全部经 include patch 覆盖在这棵树上,即 ACP `cordis.snapshot.yml` 模式的进程内表达:临时 `persistenceRoot`;禁用 `workspace-context`(录制的 fixture 不得嵌入本仓库的 AGENTS.md);禁用 `session-title-llm`(其发后不管的标题调用会与循环争抢会话的回放游标);webserver 行钉到端口 0 加已构建 dist;无密钥模式下禁用 `llm-deepseek`。patch 的 id 一旦不再匹配任何行,boot 扫描会大声失败而不是漂移。boot 在临时工作区 `chdir` 下运行,使 api-gateway 的 `process.cwd()` 会话默认值、工具 cwd 与 fixture 一致;`dsh web` bin 自身的胶水(argv、profile json、AppCLIEntry)仍由 `smoke-real.e2e.ts` 中的无密钥 CLI 冒烟把守。初始化回滚和正常关闭都会先对 Cordis 树执行 dispose(资源释放),再删除 scaffold 持有的两个临时根目录;每项清理都会独立尝试,并会报告清理失败而不掩盖初始化失败。
|
||||
|
||||
无密钥的模型替换 = 禁用适配器行的 patch 加 `installLlmReplay` 在停稳的根 ctx 上以提供方目录(providers-catalog)模式填充开放的 seam——绝不用 catch-all:适配器行被禁用后不存在任何适配器,catch-all 会让 `resolveModelInfo` 无路由可走,`compact-basic` 的步后压力检查将步步告警,而不是被可证明地闲置(发布的 128k `contextWindow` 使该路径对小 fixture 保持闲置)。选择直接安装而非插入回放插件行是刻意的:直接安装返回收尾消费检查所需的 `ReplayHandle`。没有 fixture 的场景让 seam 保持空置,任何离群的流式调用都会以 NO_ADAPTER 大声失败。
|
||||
|
||||
@@ -66,7 +66,7 @@ Web GUI 以一条真实组装链交付——chromium 页面 → client 插件 bu
|
||||
|
||||
**第二份提交的规范化会话日志预期输出。** 已否决:日志表面已由 ACP/headless/TUI 套件经同一循环与持久化钉住;在此只会翻倍刷新成本并重复测试下层。内联在根上下文事件上的世界状态断言保住了验证世界的义务。
|
||||
|
||||
**以 `DSH_SNAPSHOT` 回放分支拉起 `dsh web` bin。** 已否决:它需要在交付的 CLI 中增加测试专用回放分支和环境变量管道。进程内 scaffold 已加载同一份 `apps/cli/cordis.yml`;只剩 argv、profile JSON 和 `AppCLIEntry` 胶水不在其覆盖范围内,而这些路径已由无密钥 CLI 冒烟覆盖。
|
||||
**以 `DSH_SNAPSHOT` 回放分支拉起 `dsh web` bin。** 已否决:它需要在交付的 CLI 中增加测试专用回放分支和环境变量管道。进程内 scaffold 已加载同一份 `apps/cli/base.cordis.yml` plus its surface overlay;只剩 argv、profile JSON 和 `AppCLIEntry` 胶水不在其覆盖范围内,而这些路径已由无密钥 CLI 冒烟覆盖。
|
||||
|
||||
**为可测试性改 wire 协议。** 已否决:契约已有第一等的无密钥同构 seam(`InProcessApiClient(toFetchHandler(api))`),逐事件不合批的 SSE 恰是回放在浏览器中可观测的原因,测试一条不再交付的 wire 会颠倒该层的存在意义。
|
||||
|
||||
|
||||
Reference in New Issue
Block a user