feat(tui): startup banner iterations — slogans, sweep reveal, then no banner
Squashes three linearized steps (feat/tui-startup, feat/banner-reveal, feat/remove-banner): the banner experiment converged on removing the startup banner entirely; later commits restore it borderless and add the brand gradient.
This commit is contained in:
Turtle
@@ -0,0 +1,6 @@
|
||||
# Bilingual-pair consistency record (docs/i18n/README.md): the git blob hash of each
|
||||
# side as of the last confirmed-consistent state. Both languages carry equal authority;
|
||||
# after editing either side, bring the other along and re-record with:
|
||||
# pnpm run verify-translation-pairing --write
|
||||
2026-07-20-tui-startup-slogans.md: a2a22baafddd08145cec0d03b65ee56b2f8114b1
|
||||
2026-07-20-tui-startup-slogans.zh.md: 58fa5790f315845f27b810d62658bd79428b519b
|
||||
@@ -0,0 +1,39 @@
|
||||
# Agent Note: Startup slogans replace the configured TUI welcome line
|
||||
|
||||
Status: implemented
|
||||
|
||||
English | [中文](2026-07-20-tui-startup-slogans.zh.md)
|
||||
|
||||
> **Superseded** for the slogan/animation half by the [banner sweep Agent Note](2026-07-21-tui-banner-sweep.md): the slogan bank and typewriter reveal shipped, read as weird in use, and were replaced by a subtitle-free banner with a whole-banner sweep. The removal of the configured demo welcome and the animation-lifecycle groundwork (start after `ui.start()`, clear through `detachListeners`) stand.
|
||||
|
||||
## Problem
|
||||
|
||||
The TUI header subtitle came from a `welcome` config the demo leaf set to "TUI agent ready. Give it a coding task." — instructional filler that told a returning user nothing, restated what the product is on every boot, and had a hardcoded twin (`'ready.'`) as the schema default in two packages. The product wanted a startup moment with some character instead of a static banner caption.
|
||||
|
||||
## Decision
|
||||
|
||||
- `examples/tui-agent/cordis.yml` no longer configures `welcome`; the config key stays for deployments and fixtures that need a fixed, deterministic subtitle (the Code Mode overlay and every snapshot/scripted fixture keep theirs).
|
||||
- When `welcome` is unset, `dsh-tui` picks one member of an exported `STARTUP_SLOGANS` bank per boot (`pickStartupSlogan`, injectable random source) and reveals it with a typewriter animation: one character per 40 ms frame, a `▌` block cursor trailing until complete. The reveal starts only after `ui.start()` succeeds and its interval is cleared on dispose alongside the other listeners.
|
||||
- The slogan bank is presentation copy, deliberately not config: deployments that want controlled wording already have `welcome`. Slogans are ASCII-only by contract because the reveal slices per character.
|
||||
- `dsh-tui-demo` forwards `welcome` only when configured instead of defaulting it, so the app no longer decides the TUI's idle subtitle.
|
||||
- The keyless PTY boot scenario now waits for the reveal cursor (`▌` — the only source of that glyph in an empty transcript) instead of the removed welcome text.
|
||||
|
||||
The same change restores `packages/ui/tui/src/index.ts` to 100 % per-file coverage, which the color-scheme merge had broken on the integration branch: the editor border-color reassignment inside `applyColorScheme` was dead (the `setStatus` call right after re-derives it) and is removed, and the color-scheme query's `.then`/`.catch` arrows became named, tested handlers (`applyReportedScheme`, `ignoreSchemeQueryFailure` — the latter pinned by a test whose terminal throws on the DSR query write).
|
||||
|
||||
## Alternatives considered
|
||||
|
||||
**A fixed cooler slogan.** Rejected: one string re-read on every boot decays into wallpaper exactly like the line it replaces; a small rotating bank keeps the moment alive at no complexity cost.
|
||||
|
||||
**Making the bank and reveal speed configurable.** Rejected: that is two new knobs for presentation copy; `welcome` is already the escape hatch for deployments with an opinion, and the no-hardcoded-tunables rule targets deployment-varying behavior, not brand copy.
|
||||
|
||||
**Animating in `HeaderComponent` itself.** Rejected: the component would need a TUI handle and its own lifecycle; the chat already owns a render loop, timers, and a disposal path, so the reveal lives beside the other `createTuiChat` effects and `detachListeners` clears it.
|
||||
|
||||
## Consequences
|
||||
|
||||
- Boot output is no longer byte-deterministic when `welcome` is unset (random slogan, timed frames). Every recorded or snapshot surface pins `welcome` explicitly, so no snapshot changed; the PTY smoke anchors on the reveal cursor and the session-id line instead.
|
||||
- The `welcome` schema default disappeared from both `dsh-tui` and `dsh-tui-demo`; a direct caller passing no welcome now gets a slogan, not `'ready.'`.
|
||||
- Adding a slogan is a one-line bank edit; tests assert membership, not specific text.
|
||||
|
||||
## Testing
|
||||
|
||||
`packages/ui/tui/tests/tui.spec.ts` pins deterministic bank selection with an injected random source, the reveal (a bank member fully rendered, cursor frames observed), the configured-welcome path rendering verbatim with no cursor, and dispose stopping a mid-reveal animation. `examples/tui-agent/tests/tui-keyless-smoke.e2e.ts` boots the real tree in a PTY and waits on the reveal cursor. Verified live in tmux (mid-reveal frame `no map below▌` then the full slogan).
|
||||
@@ -0,0 +1,39 @@
|
||||
# Agent Note: 启动 slogan 取代配置化的 TUI 欢迎语
|
||||
|
||||
Status: implemented
|
||||
|
||||
[English](2026-07-20-tui-startup-slogans.md) | 中文
|
||||
|
||||
> **已被取代**：slogan/动画的那一半由[横幅扫入 Agent Note](2026-07-21-tui-banner-sweep.md)取代：slogan 库和打字机动画上线后实际使用中显得怪异，已替换为无副标题的横幅加整体扫入。移除示例配置中欢迎语的决定与动画生命周期基础设施（`ui.start()` 后启动、经 `detachListeners` 清除）保持不变。
|
||||
|
||||
## Problem
|
||||
|
||||
TUI 头部副标题来自一个 `welcome` 配置，示例叶子配置把它设为 "TUI agent ready. Give it a coding task."——一句说明书式的填充语，对老用户毫无信息量，每次启动都在复述产品是什么，而且它还有一个硬编码的孪生兄弟（`'ready.'`）作为两个包里的 schema 默认值。产品需要的是一个有性格的启动时刻，而不是一条静态横幅说明。
|
||||
|
||||
## Decision
|
||||
|
||||
- `examples/tui-agent/cordis.yml` 不再配置 `welcome`；该配置键保留给需要固定、确定性副标题的部署与 fixture（Code Mode overlay 和所有快照/脚本化 fixture 都保留各自的欢迎语）。
|
||||
- `welcome` 未设置时，`dsh-tui` 每次启动从导出的 `STARTUP_SLOGANS` 库里挑选一条（`pickStartupSlogan`，随机源可注入），并以打字机动画逐字显示：每帧 40 ms 一个字符，完成前尾随一个 `▌` 块状光标。动画只在 `ui.start()` 成功后启动，其定时器与其他监听器一起在 dispose 时清除。
|
||||
- slogan 库是展示文案，刻意不做成配置：想控制措辞的部署已经有 `welcome` 这个出口。按契约 slogan 只含 ASCII，因为逐字显示按字符切片。
|
||||
- `dsh-tui-demo` 只在配置了 `welcome` 时才转发它，不再填默认值，应用不再替 TUI 决定空闲副标题。
|
||||
- 无 key 的 PTY 启动场景改为等待逐字显示的光标（`▌`——空 transcript 里该字形的唯一来源），不再等待已删除的欢迎文本。
|
||||
|
||||
同一变更把 `packages/ui/tui/src/index.ts` 恢复到 100% 的单文件覆盖率（颜色方案合并曾在集成分支上破坏它）：`applyColorScheme` 里对编辑器边框颜色的重新赋值是死代码（紧随其后的 `setStatus` 调用会重新推导它），已删除；颜色方案查询的 `.then`/`.catch` 箭头函数改为具名、有测试的处理器（`applyReportedScheme`、`ignoreSchemeQueryFailure`——后者由一个让终端在 DSR 查询写入时抛错的测试固定）。
|
||||
|
||||
## Alternatives considered
|
||||
|
||||
**换一条更酷的固定 slogan。** 否决：一条每次启动都重读的字符串会和它取代的那行一样退化成墙纸；一个小的轮换库以零复杂度代价让这个时刻保持新鲜。
|
||||
|
||||
**把 slogan 库和显示速度做成配置。** 否决：那是为展示文案新增两个旋钮；对措辞有主张的部署已经有 `welcome` 这个出口，而「插件里不许硬编码可调参数」规则针对的是随部署变化的行为，不是品牌文案。
|
||||
|
||||
**在 `HeaderComponent` 内部做动画。** 否决：组件将需要持有 TUI 句柄和自己的生命周期；聊天层已经拥有渲染循环、定时器和释放路径，所以逐字显示与 `createTuiChat` 的其他资源放在一起，由 `detachListeners` 清除。
|
||||
|
||||
## Consequences
|
||||
|
||||
- `welcome` 未设置时启动输出不再字节级确定（随机 slogan、定时帧）。所有录制或快照表面都显式固定 `welcome`，因此没有快照变化；PTY 冒烟测试改为锚定逐字显示光标和会话 id 行。
|
||||
- `welcome` 的 schema 默认值从 `dsh-tui` 和 `dsh-tui-demo` 中消失；不传 welcome 的直接调用方现在得到的是 slogan，而不是 `'ready.'`。
|
||||
- 新增一条 slogan 只需在库里加一行；测试断言成员归属，不断言具体文本。
|
||||
|
||||
## Testing
|
||||
|
||||
`packages/ui/tui/tests/tui.spec.ts` 固定以下行为：注入随机源后的确定性选取、逐字显示（库中某条完整渲染、观察到光标帧）、配置了 welcome 时逐字动画不启动且原文渲染、以及 dispose 停止进行中的动画。`examples/tui-agent/tests/tui-keyless-smoke.e2e.ts` 在 PTY 里启动真实配置树并等待显示光标。已在 tmux 中实机验证（中途帧 `no map below▌`，随后是完整 slogan）。
|
||||
@@ -0,0 +1,6 @@
|
||||
# Bilingual-pair consistency record (docs/i18n/README.md): the git blob hash of each
|
||||
# side as of the last confirmed-consistent state. Both languages carry equal authority;
|
||||
# after editing either side, bring the other along and re-record with:
|
||||
# pnpm run verify-translation-pairing --write
|
||||
2026-07-21-tui-banner-sweep.md: c146424d53e75a72b63e346f87a5bbd206d67350
|
||||
2026-07-21-tui-banner-sweep.zh.md: 01cc153e88f067b7b8d2eb6317648f3892fe8a5a
|
||||
@@ -0,0 +1,35 @@
|
||||
# Agent Note: The banner sweeps in; the subtitle line is gone
|
||||
|
||||
Status: implemented
|
||||
|
||||
English | [中文](2026-07-21-tui-banner-sweep.zh.md)
|
||||
|
||||
> **Superseded** by the [no-banner Agent Note](2026-07-21-tui-no-banner.md): the banner itself was removed, taking the sweep with it.
|
||||
|
||||
## Problem
|
||||
|
||||
The [startup-slogans Agent Note](2026-07-20-tui-startup-slogans.md) replaced the instructional welcome line with a random slogan bank revealed by a per-character typewriter. In use the quotes read as weird — random flavor text in a tool's header — and the animation was slow (40 ms/char over a full sentence) while animating only one line of a four-line banner. This note supersedes that decision's slogan half; the removal of the configured demo welcome and the animation-lifecycle groundwork stand.
|
||||
|
||||
## Decision
|
||||
|
||||
- The slogan bank, `pickStartupSlogan`, and the typewriter reveal are deleted. When `welcome` is unset the banner simply has **no subtitle line** — title and model/session detail only. The `welcome` config remains for deployments and fixtures that want a fixed subtitle, rendered frame-deterministically with no animation.
|
||||
- The startup animation is now the **whole banner**: `HeaderComponent` gains a `revealWidth` clip, and the header box wipes in left-to-right over ~24 frames at 15 ms (~360 ms total, ~60 fps), started after `ui.start()` succeeds and cleared through the same `detachListeners` path the typewriter used. `stopBannerReveal` also resets the clip so a disposed-mid-sweep header re-renders whole.
|
||||
- The PTY smoke's boot marker changes from the typewriter cursor (`▌`) to the banner's top-right corner (`╮`), which only renders once the sweep completes.
|
||||
|
||||
## Alternatives considered
|
||||
|
||||
**Keep the animation as-is and only change the copy.** Rejected: any fixed or rotating phrase re-read on every boot decays into wallpaper; the user's judgment was that the quotes themselves, not just their content, were wrong for the surface.
|
||||
|
||||
**Animate per banner line (top-down) instead of a left-right sweep.** Rejected: with only four lines the animation would have four visible steps — closer to a flicker than a reveal; the horizontal sweep uses the full terminal width for a smooth motion at the same total duration.
|
||||
|
||||
**Character-level clipping via `revealWidth` on styled text.** Adopted with `truncateToWidth` from pi-tui, the same ANSI-aware clipper the header already uses for width overflow, so the sweep cannot tear escape sequences.
|
||||
|
||||
## Consequences
|
||||
|
||||
- Boot output with `welcome` unset is again animation-dependent but no longer random: every boot sweeps the same banner. Configured welcomes (all snapshot/scripted fixtures, the Code Mode overlay) stay frame-deterministic and unchanged.
|
||||
- The `STARTUP_SLOGANS`/`pickStartupSlogan` exports are gone; no consumer outside the deleted tests referenced them.
|
||||
- The default banner is one line shorter (no subtitle), so PTY assertions anchored on banner geometry use the corner glyph rather than any subtitle text.
|
||||
|
||||
## Testing
|
||||
|
||||
`packages/ui/tui/tests/tui.spec.ts` pins: the sweep completes to a full banner (both corners + title) and produced at least one clipped mid-sweep frame; a configured welcome renders verbatim with no clipped frames; the unset-welcome banner has no subtitle; and dispose clears the sweep's own interval handle. The PTY smoke boots on the `╮` completion marker across the tui-demo bin, the dsh CLI, and the personal-overlay scenarios. Verified live in tmux.
|
||||
@@ -0,0 +1,35 @@
|
||||
# Agent Note: 横幅整体扫入；副标题行移除
|
||||
|
||||
Status: implemented
|
||||
|
||||
[English](2026-07-21-tui-banner-sweep.md) | 中文
|
||||
|
||||
> **已被取代**：由[移除启动横幅 Agent Note](2026-07-21-tui-no-banner.md)取代：横幅本身已移除，扫入动画随之移除。
|
||||
|
||||
## Problem
|
||||
|
||||
[启动 slogan Agent Note](2026-07-20-tui-startup-slogans.md) 用随机 slogan 库加逐字打字机动画取代了说明书式的欢迎行。实际使用中这些引语显得怪异——工具头部出现随机的风味文案——而且动画很慢（每字符 40 ms，扫完一整句），却只动画四行横幅中的一行。本 note 取代该决定中 slogan 的那一半；移除示例配置中欢迎语的决定与动画生命周期的基础设施保持不变。
|
||||
|
||||
## Decision
|
||||
|
||||
- 删除 slogan 库、`pickStartupSlogan` 和打字机动画。`welcome` 未设置时横幅直接**没有副标题行**——只有标题和模型/会话详情。`welcome` 配置保留给想要固定副标题的部署与 fixture，无动画、逐帧确定地渲染。
|
||||
- 启动动画现在作用于**整个横幅**：`HeaderComponent` 增加 `revealWidth` 裁剪，头部盒子以约 24 帧、每帧 15 ms（总计约 360 ms、约 60 fps）从左到右扫入，在 `ui.start()` 成功后启动，经打字机动画用过的同一条 `detachListeners` 路径清除。`stopBannerReveal` 同时重置裁剪，因此扫入中途被 dispose 的头部会重新完整渲染。
|
||||
- PTY 冒烟测试的启动标记从打字机光标（`▌`）改为横幅右上角（`╮`），它只在扫入完成后才渲染。
|
||||
|
||||
## Alternatives considered
|
||||
|
||||
**保留动画原样、只改文案。** 否决：任何每次启动都被重读的固定或轮换语句都会退化成墙纸；用户的判断是引语本身——而不只是内容——对这个表面来说就是错的。
|
||||
|
||||
**按横幅行逐行（自上而下）动画而非左右扫入。** 否决：只有四行时动画只有四个可见步骤——更像闪烁而不是展开；水平扫入用满终端宽度，在相同总时长内动作更平滑。
|
||||
|
||||
**用 `revealWidth` 对带样式文本做字符级裁剪。** 采用 pi-tui 的 `truncateToWidth`——头部处理宽度溢出时已在使用的同一个 ANSI 感知裁剪器——因此扫入不可能撕裂转义序列。
|
||||
|
||||
## Consequences
|
||||
|
||||
- `welcome` 未设置时启动输出再次依赖动画但不再随机：每次启动扫入同一幅横幅。配置了欢迎语的场景（全部快照/脚本化 fixture、Code Mode overlay）保持逐帧确定且不变。
|
||||
- `STARTUP_SLOGANS`/`pickStartupSlogan` 导出移除；除被删除的测试外没有消费者引用它们。
|
||||
- 默认横幅少一行（无副标题），因此锚定横幅几何的 PTY 断言使用角落字形而非任何副标题文本。
|
||||
|
||||
## Testing
|
||||
|
||||
`packages/ui/tui/tests/tui.spec.ts` 固定：扫入完成为完整横幅（两个角 + 标题）且产生了至少一个裁剪的中途帧；配置的欢迎语原文渲染且无裁剪帧；未设置欢迎语的横幅没有副标题；dispose 清除扫入自己的定时器句柄。PTY 冒烟测试在 tui-demo bin、dsh CLI 和个人 overlay 场景中以 `╮` 完成标记启动。已在 tmux 中实机验证。
|
||||
@@ -0,0 +1,6 @@
|
||||
# Bilingual-pair consistency record (docs/i18n/README.md): the git blob hash of each
|
||||
# side as of the last confirmed-consistent state. Both languages carry equal authority;
|
||||
# after editing either side, bring the other along and re-record with:
|
||||
# pnpm run verify-translation-pairing --write
|
||||
2026-07-21-tui-no-banner.md: 284d02df4b1fe3445a76b030aa873164081aa571
|
||||
2026-07-21-tui-no-banner.zh.md: 83bf7ffa27ca1abef0e71a1847b5aa1bd54bbe87
|
||||
@@ -0,0 +1,37 @@
|
||||
# Agent Note: No startup banner
|
||||
|
||||
Status: implemented
|
||||
|
||||
English | [中文](2026-07-21-tui-no-banner.zh.md)
|
||||
|
||||
## Problem
|
||||
|
||||
The TUI opened with a boxed product banner ("DEEPSEEK HARNESS" + model/session detail), most recently with a sweep-in animation ([banner sweep Agent Note](2026-07-21-tui-banner-sweep.md)). The user's verdict: remove it. A product title re-read on every boot is chrome, the box spends four rows before any content, and the identifying facts it carried (model, session) have better homes.
|
||||
|
||||
## Decision
|
||||
|
||||
- `HeaderComponent`, the sweep animation, and its lifecycle wiring are deleted. The TUI mounts straight into the transcript; startup renders nothing above the separator.
|
||||
- The model name moves into the footer status line's left segment (`<model> <cwd> ↑tokens ↓tokens`), so the session's driving model stays visible at all times, not just at boot. The session id is no longer displayed — it lives in the session log and `./.sessions` filenames, and `RESUME_SESSION_ID` consumers retrieve it there.
|
||||
- `welcome`, when configured, renders as the transcript's first line (a muted notice) inside `rebuildTranscript`, so palette swaps preserve it. Unset renders nothing. Fixtures keep their configured welcomes; the PTY smoke's boot marker becomes the footer's model name, the only mounted-TUI text guaranteed to render regardless of cwd length.
|
||||
|
||||
This supersedes the [banner sweep Agent Note](2026-07-21-tui-banner-sweep.md) entirely: both the sweep and the banner it animated are gone.
|
||||
|
||||
## Alternatives considered
|
||||
|
||||
**Keep a one-line header (no box).** Rejected: the only load-bearing fact was the model name, and the footer already aggregates session status; a dedicated header row for one fact is the same chrome, smaller.
|
||||
|
||||
**Show the session id in the footer too.** Rejected: a 36-char UUID dominates the 100-column footer and clips the status segment; it identifies the session for resume, which is a log/filesystem concern, not a glanceable one.
|
||||
|
||||
**Print the welcome outside the transcript (above the separator).** Rejected: any fixed region above the transcript is a banner again; as a transcript line it scrolls away naturally and survives rebuilds through the same path as every other transcript element.
|
||||
|
||||
## Consequences
|
||||
|
||||
- Startup output is fully deterministic again — no animation frames at all; the interval-lifecycle machinery from the two animation iterations is gone.
|
||||
- All 26 pi-tui terminal snapshots re-recorded (`test:snapshot:refresh`): banner rows gone, footer rows gain the model prefix.
|
||||
- Anything that anchored on banner text (`DEEPSEEK`, box corners) re-anchors on the footer model name; `main-session-` no longer appears in boot output.
|
||||
- `/clear` now wipes the welcome line too: it is an ordinary transcript line, and `/clear` empties the transcript (the old banner survived `/clear` only by sitting outside it).
|
||||
- The footer's left segment is wider; on narrow terminals the right status segment clips earlier.
|
||||
|
||||
## Testing
|
||||
|
||||
`packages/ui/tui/tests/tui.spec.ts` pins: no box corners/product title and an empty transcript when `welcome` is unset, with the model in the footer; a configured welcome as the first transcript line without a banner; and the welcome surviving a palette-swap transcript rebuild. The PTY smoke boots on the footer model name and asserts `DEEPSEEK HARNESS` is absent. Snapshots verify the full frames.
|
||||
@@ -0,0 +1,37 @@
|
||||
# Agent Note: 移除启动横幅
|
||||
|
||||
Status: implemented
|
||||
|
||||
[English](2026-07-21-tui-no-banner.md) | 中文
|
||||
|
||||
## Problem
|
||||
|
||||
TUI 启动时展示一个带框的产品横幅（"DEEPSEEK HARNESS" + 模型/会话详情），最近一版还带扫入动画（[横幅扫入 Agent Note](2026-07-21-tui-banner-sweep.md)）。用户的裁决：删掉它。每次启动都被重读的产品标题是装饰，盒子在任何内容之前先占掉四行，而它承载的识别信息（模型、会话）有更好的去处。
|
||||
|
||||
## Decision
|
||||
|
||||
- 删除 `HeaderComponent`、扫入动画及其生命周期接线。TUI 直接挂载进 transcript；启动时分隔线之上不渲染任何东西。
|
||||
- 模型名移入页脚状态行的左段（`<model> <cwd> ↑tokens ↓tokens`），会话使用的模型因此始终可见，而不只是启动时。会话 id 不再显示——它存在于会话日志和 `./.sessions` 文件名中，`RESUME_SESSION_ID` 的使用者从那里获取。
|
||||
- 配置了 `welcome` 时，它作为 transcript 的第一行（一条弱化的通知）在 `rebuildTranscript` 内渲染，因此调色板切换会保留它。未设置则什么也不渲染。fixture 保留各自配置的欢迎语；PTY 冒烟测试的启动标记改为页脚的模型名——无论 cwd 多长都保证渲染的唯一挂载后文本。
|
||||
|
||||
本 note 完全取代[横幅扫入 Agent Note](2026-07-21-tui-banner-sweep.md)：扫入动画和它所动画的横幅都已移除。
|
||||
|
||||
## Alternatives considered
|
||||
|
||||
**保留单行头部（去掉盒子）。** 否决：唯一有承载价值的信息是模型名，而页脚已经聚合会话状态；为一条信息保留专用头部行仍是同一种装饰，只是小一点。
|
||||
|
||||
**把会话 id 也放进页脚。** 否决：36 字符的 UUID 会占满 100 列页脚并裁掉状态段；它的用途是恢复会话的标识，属于日志/文件系统关注点，不是需要一瞥可见的信息。
|
||||
|
||||
**把欢迎语渲染在 transcript 之外（分隔线上方）。** 否决：transcript 上方任何固定区域都会再次变成横幅；作为 transcript 行它自然滚走，并通过与其他 transcript 元素相同的路径在重建后保留。
|
||||
|
||||
## Consequences
|
||||
|
||||
- 启动输出再次完全确定——没有任何动画帧；两轮动画迭代留下的定时器生命周期机制全部移除。
|
||||
- 全部 26 个 pi-tui 终端快照重新录制（`test:snapshot:refresh`）：横幅行消失，页脚行增加模型前缀。
|
||||
- 锚定横幅文本（`DEEPSEEK`、盒子角）的内容改为锚定页脚模型名；启动输出中不再出现 `main-session-`。
|
||||
- `/clear` 现在也会清掉欢迎行：它是普通的 transcript 行，而 `/clear` 清空 transcript（旧横幅能在 `/clear` 后存活只因为它在 transcript 之外）。
|
||||
- 页脚左段变宽；窄终端上右侧状态段更早被裁剪。
|
||||
|
||||
## Testing
|
||||
|
||||
`packages/ui/tui/tests/tui.spec.ts` 固定：`welcome` 未设置时无盒子角/产品标题、transcript 为空、模型在页脚；配置的欢迎语作为 transcript 第一行且无横幅；欢迎语在调色板切换的 transcript 重建后保留。PTY 冒烟测试以页脚模型名为启动标记并断言 `DEEPSEEK HARNESS` 不出现。快照验证完整帧。
|
||||
Reference in New Issue
Block a user